Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 229. (Read 835838 times)

Thx for answer.
I tried different risers/cards, and tried running only 1 card to, with the same result.
I also booted on an Ubuntu pendrive and checked lspci command, and GPU shows up. Monitor is connected through GPU to, all works fine.

It's strange. The rig had been working fine for weeks, until I decided to reduce power limit to the same as my Win 10 rig with similar Nvidia 1070TI gpus, then it started acting strange with sudden adjustments to core clocks causing the rig to sometimes freeze(I posted about this a page or two back). It could be running perfectly fine for a few hours, then it suddenly clocked up by itself and froze.

Could it be something wrong with the SMOS config causing it to not start up properly? Perhaps I should do a fresh install on pendrive again.

edit: Re installing/flashing OS to pendrive fixed it. Woohoo.

Nobody had this inconvenience?

All is good.  I like that you guys post updates on here when the online interface is down.

Hoping for some help again.  I have 5 rigs.  3 all use the same card and are working fine.  2 of the rigs will not stabilize even when not over clocking.. 

Both rigs use the following hardware:

GIGABYTE GA-Z270P-D3 LGA1151

Intel BX80662G4400 Pentium Processor G4400 3.3 GHz

Ballistix Sport LT 4GB Single DDR4 2400 MT/s (PC4-19200)

Lexar JumpDrive S75 64GB USB 3.0 Flash Drive

VICTONY GPU Riser Adapter

EVGA SuperNOVA 850 G2, 80+ GOLD 850W

Also 5 intake fans per rig on  open air cases.

Rig #1 uses the following cards:
4 x Gigabyte AORUS XTREME GeForce GTX 1060 6GB
2 x Gigabyte GeForce GTX 1060 Windforce OC 6GB

INFO: Detected new work: 3bbc
INFO: Detected new work: 3bbd
Temp: GPU0: 65C GPU1: 65C GPU2: 74C GPU3: 58C GPU4: 65C GPU5: 67C
GPU0: 170 Sol/s GPU1: 313 Sol/s GPU2: 299 Sol/s GPU3: 312 Sol/s GPU4: 310 Sol/s
GPU5: 309 Sol/s
Total speed: 1713 Sol/s



Rig # 2 uses these cards

4 x Gigabyte GeForce GTX 1070 Mini ITX OC 8GB
2 x EVGA GeForce GTX 1060 SC GAMING, ACX 2.0 (Single Fan), 6GB

INFO 02:52:54: GPU3 Accepted share 123ms [A:14, R:1]
Temp: GPU0: 74C GPU1: 70C GPU2: 70C GPU3: 69C GPU4: 76C
GPU0: 423 Sol/s GPU1: 431 Sol/s GPU2: 304 Sol/s GPU3: 303 Sol/s GPU4: 428 Sol/s
Total speed: 1889 Sol/s

Both are running on ewbf-0.3.4b mining zclassic
with these options:

   --server us-east.zclassic.miningpoolhub.com --port 20575 --user dirtydeeds.$rigName --pass x

Not overclocked and still crashing after a few hours or less.  I am feeding 90volts to the 1060s and 100volts to the 1070s.

No more than 2 risers per sata cable.

Have not updated BIOS

Any suggestions?

The problem with offline dahsboard is fixed.
OVH Cloud infrastructure had problem with disk performance (the speed degraded 20 times).
They fixed this after about 1,5 hour.
Anyway i am speaking with AWS Amazon cloud providet to move there becasue OVH is .......
I am sorry for that problem. Keep in mind that all your rigs should be mining fine with last downloaded settings even if dashboard is offline.
When simplemining dahsboard is offline it is important to check your rigs statistics on pool website just to be calm.
Thanks for your patience and your support !

Mostly it means that system cant find any GPU or process didnt started.
IF you have one gpu then check if it is connected, meaby something unplugged ?
Or it could be problem with riser.
You can enter command: lspci
that will list your devices. Check if you will see AMD or NVIDIA there.

It means the mining program is not running. Reboot the rig and see if that fixes it.

So my rig stopped mining, and it seemed to have nothing to do with the server being down.

I decided to hook a monitor to my rig to see if could find out anything. And after booting the SMOS displays this message over and over "There is no screen attached matching miner".
Any ideas what this really means?

Working fine for me so far, everything seems back to normal at the moment.

why i cant login to my rig anymore ? miner / miner ? says access denied

site doesnt show anything ( it says See Console ) but Console doesnt show anyting !  and i cant login to my rig with SSH but i see i have hash rates on the pool !!!https://ibb.co/hSvg6w

UPDATE:
Seems that OVH just fixed the problem.
I will be watching this for next hour.

I've installed my first rig just yesterday evening and I was optimizing today just when the connection to the server failed. So I can’t optimize further on right now. So what. It really doesn’t care. My rig is currently hashing with 174 MH instead of 184 MH at it's optimum. SO WHAT. Calm down! And if your rig was not running till now because you were still setting it up you don’t have a loss of Hash.

Back up

Awesome, glad its getting fixed. Yes please switch over to amazons storage or something more robust/stable.

Try  www.Shinjiru.com

lol

SMoS is its own operating system , don’t know you need to run it in Linux separately

My rig is not hashing, hmm.

bro give the guy a break. unless youre paying the fee for a 1 card rig, youre not missing out on much. we're still hashing.

you cant, if you are setting up new rigs, they cant register nor update on the shitty servers...

Accualy i am speaking with Amazon AWS to migrate to their service because OVH is shit but i had to start somewere ....

And yes, please calm down and just watch your rigs in pool to have confirmations that they are working.