Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 230. (Read 835509 times)

Am i the only one having connection problems between my SMOS rigs ( different locations around 10kms away ) and simplemining.net main server?
On webpage my rigs seem offline but on pools theyre online. So i cannot reset reboot them or cannot change miner settings?

fan speed isn t a " minimum fan speed". smos doesn t adjust the fan speed when your gpu get hot. yes, a270a

I've had this problem for 3 days. different cards, different risers. can't find solution yet. What mobo do you have? Is it a 270-A?

But the minimum fan speed (%) do nothing its just stay under the minimum fanspeed... Is it normal?

Heads up, there is a serious networking issue when using SMOS on this motherboard: ASRock H110 Pro BTC+

At random times this motherboard running SMOS could sabotage your entire network. It will block internet connection from all devices connected to your network until it is rebooted. We built three SMOS mining computers with this board and all 3 have experienced this issue in different network environments with Cisco, Netgear and ASUS routers on both coax cable and fiber connections. After searching online, I found other people posting the same issue.

It doesn't happen real often, sometimes within 5 hours of booting up, sometimes after a week but it seems like it's inevitable and it will eventually affect your mining and your network. I haven't noticed any evidence of any permanent damage.

I'm hoping for a resolution soon but until I hear of one, I plan on switching to an ASUS B250 Mining Expert, arrived today ($400 on Amazon, ouch), just in time to see the B250 go on sale on NewEgg for $199. Guess what I'll be returning.

If you've experienced this issue, please consider sharing your information on ASRock's Support Page https://event.asrock.com/tsd.asp to help them determine the cause and trouble shoot. They are already tracking this issue and forwarding info to the tech team in Taiwan.  Here are the replies I received:


So I asked if I had to use Windows with this motherboard and this was their reply:

fan speed it s fixed X% and target temp is fail safe ( shuts off when temp is reached)

What's the trick to get this working under linux?

Hi guys!

Im new is SMOS, currenctly im using windows, but i want to change to SMOS. I tried it today and works fine, but the fan control not works. I add in the oc settings a minimum fan speed % and target temperature but do nothing and the OS let the card overheat...


I tryed with:
SMOS latest release Operation System ( for nvidia one)
GTX 1050 Ti 4gb Gainward (direct plugged in not trought usbriser)
Claymore eth+pasc / ewbf zec miner too

It cannot handle fan speed, but i dont know why. Is simpleminingos can handle nvidia's fan?


Thanks for help

http://www.kepfeltoltes.eu/images/hdd1/2018/01/23/509smos.jpg


http://www.kepfeltoltes.eu/images/hdd1/2018/01/23/509smos_tn.jpg

http://www.kepfeltoltes.eu/view.php?filename=509smos.jpg

http://www.kepfeltoltes.eu/view.php?filename=509smos.jpg


errors in image:


ERROR: error quering enabled displays on GPU 0 (missing Extension)

ERROR: error quering enabled displays on GPU 0 (missing Extension)

ERROR: Error resolving target specification 'gpu:0' (No targets match terget specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[2]'.

Hello All,

using this in SMOS
-s xmr-eu1.nanopool.org:14444 -w xxxxxxxxxxxxxxxxxxxxx.$rigName -p z -i 1000

I change intensity to improve hashrate, but how can I change the amount of gpu-threads to more than default? and what is default?
Is there a formula I should be using?

Running AMD rx470/480 and rx570/580's

Thanks

Still can not mine neoscrypt with AMD RX cards, anyone has a fix?

So only me having this problem? The 1070TI rig had been stable for about 16 hours now. Core clocks hovering normally around 1750. I've been checking it regularly. Suddenly now I see it had crashed and locked up again, and clocks showing 1999.. 

Hello,

2 quick questions.  New to mining and linux ... not new to PCs.  I loaded this OS on a ThinkServer 140 with a Nvidia 1070 in it over the weekend.  I got it working, but it will only work with the BIOS in Legacy mode.  Booting in UEFI says Operating System not Found.  I originally thought it was due to me initializing the disk as MBR, so I wiped it and initialized it GPT.  That didn't seem to help.  I'm ok with running this system in Legacy BIOS, but I'm looking to build an 8 GPU miner and was reading in this thread UEFI may need to be enabled to get some systems to see 8 GPUs.  Is it the image I'm using?  Is there a UEFI capable disk image out there anywhere?

2nd, the 8 GPU miner I want to build.  With video cards in short supply and going for 2-2.5x MSRP prices, I'm wondering if I should just hoard cash until the Volta line of GPUs become available.  This might be a stupid question, but am I right in assuming getting a Volta based GPU to work in Simple Miner is as simple as updating video drivers?

Also, once I got it setup, SimpleMiner works like a champ ... love the OS.

The above solution did not solve all my problems.  The hashrate was good for a while but then went back to crap.

I followed the advice on Reddit and filled my PCI slots in the numerical order (I had read elsewhere it did not matter).  Now that I did this my rig is mining at the expected hashrate again.

Hi, I have problems to run SMOS, he tells me several times that he found the v1137 and starts downloading, but after downloading again he executes some commands and he says the same thing again and starts downloading again. This is repeated over and over again and never ends. How can I solve it.
Try again to download the SMOS (version 1137) and do exactly the same

Hello there.

First time donator here.

I would be glad to see following miner included in SimpleMining os.

(amd)
NSGMiner. Optimized miner for Neoscrypt outperforms other Neoscrypt miners. tested with AMD RX series (580), 4 and 8 GB.



Bugfixes to be done :

- Adding mininggroup, adds newly created items 10 times in list, instead of 1 time
- SGminer and links for Gateless are copy-paste issues. Bitcointalk numbers the same. Gatelessminer links to SGminer.
- Timeout on website is sometimes to short. Continuesly recaptcha thing is not my favorite. One time oke, but multiple times a day ?
- As some spoke, add more kernels to SGminer, so we can choose what to mine. It gives errors now, since no kernals found (exept cryptonight, which is overly represented)

And last but not least, good job putting it all together.

Regards,

DS-M

Hello!!

I'm using GTX1070ti to mine Neoscrypt coin with ccminer-skunk-krnlx or ccminer-tpruvot-v2.1.
The card performs around 800M-900kh. My OC is Core:125,MEM:1250,Powerlimit:120.
Is it normal hash rate for mining Neoscrypt ?
Should it be around 1000-1100kh ?

Thank you in advance for any suggestion.

Hello.  I've been using SMOS for a few days and have decided to stick with it.

Does anyone know how or if you can export or look at the Miner Console log?  I'd like to go through the history of the hashings, particularly through the night.  Exporting the data would be ideal that way people could complete some analysis on their GPU tuning with actual history.

in what way?

i know people who mine it already, but they run windows

myetherwallet supports etherzero. would it support scam?

There were several warnings about EthZero, you should probably stay away from it because it could put your system at risk.

Hello everyone!

What do you think about Ethzero? How is it mined with SM?