[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 313.

tflux99

member

Activity: 89

Merit: 10

Quote from: RfBTC on October 18, 2017, 02:56:05 AM

Quote from: tflux99 on October 17, 2017, 05:18:20 PM

Quote from: FirstRigger on October 17, 2017, 12:18:04 PM

Quote from: tflux99 on October 17, 2017, 11:49:33 AM

hi all just want to inform you that smos runs fine for me

my rig

13x rx470/570 2x 1200 watt power supply corsair asrock 13gpu MB intel pentium not celeron! 8 GB ram sandisk usb3.0 usb with smos

powerconsumtion in dual mining mode with -dcri 20

screenshot of mining

so dont blame the dev he deserves no flaming just help him to get it even better...!!

4 me its fine

tflux99, what is your smOS setup?

Yes, I confirm too, that smOS run fine.
BUT with lot of power drawing, same extrem wattage as tflux99 show.
Over 144w per card?
What is with undervolting?

in dual mining mode you wont get much lower power consumption... in windows a 6 card ethereum only mining rig has around 800 watt in dual mining around 900 watts so i think you wont get it very much lower in dual mining mode without power mods i have 2250 watts now 1850 to 1900 watts with mods undervolting settings in smos and bios mods to the cards if you want to get lower wattage at same speeds try to get some rx470 with just 6 pin pcie connector

Hi dude, whats you command line in SMOS ? are you using claymore-eth-v10 ?

hi yes nothing speacial here claymore 10.0

-wd 1 -r 1 -epool eu2.ethermine.org:14444 -ewal 0xxxxxxxxxxxxxxxxxxxxxxx.$rigName -epsw x -etha -1 -dpool dcr.suprnova.cc:3252 -dwal xxxxxxxxx.THM10GPU13xRX570 -dpsw x -dcri 20 -allpools 1

my miner commandline

some pages back i posted my settings with undervolting etc...

afrosamuraiy

newbie

Activity: 8

Merit: 0

hey guys,

i just installed simplemining os and got it running. i got a 5*rx480 and 1*rx470 all 8g msi cards rig. can someone tell me the ideal overclocking settings on simplemining.net? cheers!

RfBTC

member

Activity: 68

Merit: 10

Quote from: tflux99 on October 17, 2017, 05:18:20 PM

Quote from: FirstRigger on October 17, 2017, 12:18:04 PM

Quote from: tflux99 on October 17, 2017, 11:49:33 AM

hi all just want to inform you that smos runs fine for me

my rig

13x rx470/570 2x 1200 watt power supply corsair asrock 13gpu MB intel pentium not celeron! 8 GB ram sandisk usb3.0 usb with smos

powerconsumtion in dual mining mode with -dcri 20

screenshot of mining

so dont blame the dev he deserves no flaming just help him to get it even better...!!

4 me its fine

tflux99, what is your smOS setup?

Yes, I confirm too, that smOS run fine.
BUT with lot of power drawing, same extrem wattage as tflux99 show.
Over 144w per card?
What is with undervolting?

in dual mining mode you wont get much lower power consumption... in windows a 6 card ethereum only mining rig has around 800 watt in dual mining around 900 watts so i think you wont get it very much lower in dual mining mode without power mods i have 2250 watts now 1850 to 1900 watts with mods undervolting settings in smos and bios mods to the cards if you want to get lower wattage at same speeds try to get some rx470 with just 6 pin pcie connector

Hi dude, whats you command line in SMOS ? are you using claymore-eth-v10 ?

logicassets

newbie

Activity: 49

Merit: 0

Curious. Before blaming SmOS, can you get the same build to mine stable on ANY other OS? The reason I ask is Michael Carter, over at BBT, has been trying to get 19-GPU's to run stable on ANY OS for a couple weeks now. I think he offered a good prize to anyone who could video (not photo) their setup, with hash output on a screen, and power draw from the wall. What we know is that ASUS has only verified 19-GPU's can run (not mine stably) if:

1) All GPU's are MINING EDITION (no video out).
2) 32GB of DDR4 memory.
3) All 3 24-pin motherboard connections powered. (Though plenty of people have successfully daisy chained multiple PSU's off of 1 24-pin motherboard connection)

This is probably his 4th video on the B250. Does it work? I don't know because his videos are too long... https://youtu.be/h-ZEPjoFh2I

Quote from: jamesbing on October 17, 2017, 07:40:45 PM

Quote from: Threader2017 on October 17, 2017, 01:55:46 AM

Asus B250 Mining Expert mobo seems to work faulty on Simplemining! needs an update ASAP! I have 22 rigs on simpleminig, 2 of them run on B250 Mining Expert mobos, they get completely locked up once a day. It's very frustrating. Please contact me or do something about my favorite mining OS. I need to run those rigs 24/7 Embarrassed

I had the same issue. I think it is because Asus uses a CPU based onboard graphics card. SMOS and Claymore try to use that as a gpu for mining and it slows everything down. I couldn't get it to work with SMOS and 12 cards.

jamesbing

newbie

Activity: 2

Merit: 0

Quote from: Threader2017 on October 17, 2017, 01:55:46 AM

Asus B250 Mining Expert mobo seems to work faulty on Simplemining! needs an update ASAP! I have 22 rigs on simpleminig, 2 of them run on B250 Mining Expert mobos, they get completely locked up once a day. It's very frustrating. Please contact me or do something about my favorite mining OS. I need to run those rigs 24/7 Embarrassed

I had the same issue. I think it is because Asus uses a CPU based onboard graphics card. SMOS and Claymore try to use that as a gpu for mining and it slows everything down. I couldn't get it to work with SMOS and 12 cards.

RfBTC

member

Activity: 68

Merit: 10

Quote from: tytanick on October 09, 2017, 05:34:27 AM

Quote from: ?? on ??

Hi Guys,
I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused
However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.
A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

I probably know whats causing it and i just need to make some fix in my script.
Anyway if i am thinking right then this issue is only on slow pendrives.

The dummy and temporary fix could be:
/root/utils/rclocal.sh
change 31 line from
sleep 6
to
sleep 20

The Xorg is starting too slow on slow pendrives and thats probably the issue.
I have pretty fast ones so i dont have this issue and this explains why reloading fixes this problem.

I will make some checkups first before miner starts.

Hello Tytanick after applying DAG Fix, my rig do not appear in the rig list..... i have reseted the rig and it changed my email to [email protected] , how can i fix / modify it ? thanks

tflux99

member

Activity: 89

Merit: 10

Quote from: FirstRigger on October 17, 2017, 12:18:04 PM

Quote from: tflux99 on October 17, 2017, 11:49:33 AM

hi all just want to inform you that smos runs fine for me

my rig

13x rx470/570 2x 1200 watt power supply corsair asrock 13gpu MB intel pentium not celeron! 8 GB ram sandisk usb3.0 usb with smos

powerconsumtion in dual mining mode with -dcri 20

screenshot of mining

so dont blame the dev he deserves no flaming just help him to get it even better...!!

4 me its fine

tflux99, what is your smOS setup?

Yes, I confirm too, that smOS run fine.
BUT with lot of power drawing, same extrem wattage as tflux99 show.
Over 144w per card?
What is with undervolting?

in dual mining mode you wont get much lower power consumption... in windows a 6 card ethereum only mining rig has around 800 watt in dual mining around 900 watts so i think you wont get it very much lower in dual mining mode without power mods i have 2250 watts now 1850 to 1900 watts with mods undervolting settings in smos and bios mods to the cards if you want to get lower wattage at same speeds try to get some rx470 with just 6 pin pcie connector

davemanet

full member

Activity: 336

Merit: 100

Hi All, with Dwarfpool they allow send email alert if worker stops working for 15 minute. Does anyone know how to enter our email address into SMOS so that we get this alert?

Morpheus Poland

newbie

Activity: 11

Merit: 0

Its posibble mining all algo like nicehash 2.0 or legacy.?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Morpheus Poland on October 17, 2017, 01:43:29 PM

.Hey crypto guys how configure ccminer to mine nicehash please write to me config
I have 13xgpu gtx1060
Thanx a lot cyber brother :-)

Depends on what you want to mine.

For NVIDIA rigs selling hash at Nicehash

ETH - use Claymore 10
ZEC - use EWBF
XMR - use ccminer

You can use ccminer for all other algos that runs great on NVIDIA GPUs.

Morpheus Poland

newbie

Activity: 11

Merit: 0

.Hey crypto guys how configure ccminer to mine nicehash please write to me config
I have 13xgpu gtx1060
Thanx a lot cyber brother :-)

frode88

newbie

Activity: 41

Merit: 0

Hi.
Can you update Ethminer from 0.11 to 0.12? Thank you.

FirstRigger

newbie

Activity: 25

Merit: 0

Quote from: tflux99 on October 17, 2017, 11:49:33 AM

hi all just want to inform you that smos runs fine for me

my rig
http://image4web.net/image.php?di=NA5M

13x rx470/570 2x 1200 watt power supply corsair asrock 13gpu MB intel pentium not celeron! 8 GB ram sandisk usb3.0 usb with smos

powerconsumtion in dual mining mode with -dcri 20
http://image4web.net/image.php?di=F961

screenshot of mining
http://image4web.net/image.php?di=JXGP

so dont blame the dev he deserves no flaming just help him to get it even better...!!

4 me its fine

tflux99, what is your smOS setup?

Yes, I confirm too, that smOS run fine.
BUT with lot of power drawing, same extrem wattage as tflux99 show.
Over 144w per card?
What is with undervolting?

tflux99

member

Activity: 89

Merit: 10

hi all just want to inform you that smos runs fine for me

my rig

13x rx470/570 2x 1200 watt power supply corsair asrock 13gpu MB intel pentium not celeron! 8 GB ram sandisk usb3.0 usb with smos

powerconsumtion in dual mining mode with -dcri 20

screenshot of mining

so dont blame the dev he deserves no flaming just help him to get it even better...!!

4 me its fine

andreas911

sr. member

Activity: 896

Merit: 323

ok I try all day long to setup one rig for neoscrypt in smOS, but it's not working, sgminer crash from begining.

Has anywhere run smOS and use RX580 to mine neoscrypt coins?

Yes??

Please send me your command line from smOS and tell me wich miner you use.

gminer-gm-nh-5.5.5-8

or

sgminer-pascal-5.5

or

sgminer-gm-5.5.5

shabbat

newbie

Activity: 36

Merit: 0

Quote from: andreas911 on October 17, 2017, 05:30:34 AM

Hi Devs!
Hi Tytanik!

I want to mine with my rigs a neoscrypt coin in SMOS. But rigth now there is no neoscrypt miner programm in SMOS availebile.

I know that gatelessgate work for neoscrypt in Linus OS.

Please include gatelessgate in SMOS!

If there is a option that I can self include gatelessgate in SMOS, please let me know.

I know a lot of provitabele coins, but for this I absolutely need a neoscrypt miner in SMOS.

YES!!!! YES!! gatelessgate-0.1.3 !!!
Please include gatelessgate in SMOS!

FirstRigger

newbie

Activity: 25

Merit: 0

Quote from: jeanvin on October 17, 2017, 08:50:43 AM

I have 6x Sapphire RX 470 4gb elpida memory, mining edition (11256-21-21G), with bios modded. My Mother Board is an asus H110 pro BTC+

SMOS with RX OS DAGFix
Core: 1150
Mem: 2100
core undervolting: 800
powerstage: 5
command line: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1

I'am getting 176MH/s for 6 cards (about 29mh/s per card)

My power consumption is 1000 watt at the wall. What is your power consumption? Is 1000watt too much? Any ideas how I can improve?

Yes, it is too much. Very-very much.

I have 11xSapphire RX580, only ETH, 327MH/s and 1750w from wall. (dual with DEC 2040w from wall)

Extrem high, but you must like this wattage with smOS.

andreas911

sr. member

Activity: 896

Merit: 323

Quote from: citronick on October 17, 2017, 07:29:38 AM

Quote from: andreas911 on October 17, 2017, 05:30:34 AM

Hi Devs!
Hi Tytanik!

I want to mine with my rigs a neoscrypt coin in SMOS. But rigth now there is no neoscrypt miner programm in SMOS availebile.

I know that gatelessgate work for neoscrypt in Linus OS.

Please include gatelessgate in SMOS!

If there is a option that I can self include gatelessgate in SMOS, please let me know.

I know a lot of provitabele coins, but for this I absolutely need a neoscrypt miner in SMOS.

I have got neoscrypt running on smOS previously using sgminer.

You can also use the tpruvot ccminer v2.1 for neoscrypt too.

Ahh I see I have forgot to write, that I have AMD RX 580 Cards. ccminer is only for nvidia Cards. I hope I can use a other miner in SMOS.

Or I have a option to install a other miner for RX580 and scrypt algo.

Edit: Wich sgminer version is for scrypt an do you have a commandline for me?

jeanvin

newbie

Activity: 7

Merit: 0

I have 6x Sapphire RX 470 4gb elpida memory, mining edition (11256-21-21G), with bios modded. My Mother Board is an asus H110 pro BTC+

SMOS with RX OS DAGFix
Core: 1150
Mem: 2100
core undervolting: 800
powerstage: 5
command line: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1

I'am getting 176MH/s for 6 cards (about 29mh/s per card)

My power consumption is 1000 watt at the wall. What is your power consumption? Is 1000watt too much? Any ideas how I can improve?

tpd09

full member

Activity: 287

Merit: 100

is there a way to include our own miners to SMOS? Since the devs do not update the miners as frequently as needed.
thanks

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 313. (Read 835838 times)