[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 465.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

UPDATE
THE NEW WEBSITE and DASHBOARD is up and running.
You can guys start making deposits for future fee system

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: decayinjack on May 14, 2017, 01:17:38 PM

Thanks to Soothaa continuing after I gave up. I can now run 7 570s on my 170a boards!
Anyhow, I've been carefully watching my power usage due to having to make sure I'm balancing the load of my machines across circuits. I'm not doing anything with the bios tuning to try and lower my power but I do set all them to power stage 4. With that, a 7 gpu rig runs under 1000w at the wall or just under 9 amps.

Can you tell me which image worked on Z170 ?

decayinjack

newbie

Activity: 26

Merit: 0

Quote from: teomihsav on May 14, 2017, 09:03:34 AM

Quote from: soothaa on May 13, 2017, 09:10:58 AM

For those waiting on the info for the MSI Z170A M5 Gaming board and 7x GPU support I finally have it working on both of my boards.

1) Make sure you're running the latest BIOS!
2) Enable 4G
3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES
4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS
5) Plug your monitor into the ONBOARD graphics
6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!)

My 14x GPUs have been stable all night long!

How did you manage to reduce power from the wall? I bring up 10 video cards but the power is nearly 1700watts. I have try with moded bios but no difference. On W10 i have managed for 6 v. cards to consume less than 800watts.
SM is a great thing but without voltage control is not acceptable.

Thanks to Soothaa continuing after I gave up. I can now run 7 570s on my 170a boards!

Anyhow, I've been carefully watching my power usage due to having to make sure I'm balancing the load of my machines across circuits. I'm not doing anything with the bios tuning to try and lower my power but I do set all them to power stage 4. With that, a 7 gpu rig runs under 1000w at the wall or just under 9 amps.

vacs03

member

Activity: 63

Merit: 10

Quote from: Apolyon on May 14, 2017, 12:27:56 PM

Hi everyone.

I'm using SMOS from 14 days - great job Tytanick. Today I wanted to try Dual Mining with some Pascalcoin. Did the proper settings in Claymore 9.3 and my hashrate for Ethereum dropped to 50% of normal speed to about 13,5-14 MH/s per GPU while Pascal was around I believe ~2500 MH/s in total.

What have I messed?

My RIG is 6x RX 570 Gigabyte Elpida @ 1060 MHz core clock, 1940 MHz mem clock, power stage set to 0, 820 Watt from wall - it was stable for 14 days on Ethereum solo at 164 MH/s.

For Dual Mining I tried to even set power stage to 5 but it doesn't work either, seems like mining Pascalcoin is prioritizing over Ethereum.

I'm newbie miner, if this issue isn't software related please forgive me and ignore my post. Believe me or not, had tried to solve it by myself already.

add -drci 10 at the end of the commands, mine looks like this

Code:

-epool eth-eu1.nanopool.org:9999 -ewal wallet/Vacs/email -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal wallet.vacs/email -dpsw x -dcoin pasc -etht 1000 -dcrt 1000 -ftime 10 -dcri 10

Apolyon

newbie

Activity: 14

Merit: 0

Hi everyone.

I'm using SMOS from 14 days - great job Tytanick. Today I wanted to try Dual Mining with some Pascalcoin. Did the proper settings in Claymore 9.3 and my hashrate for Ethereum dropped to 50% of normal speed to about 13,5-14 MH/s per GPU while Pascal was around I believe ~2500 MH/s in total.

What have I messed?

My RIG is 6x RX 570 Gigabyte Elpida @ 1060 MHz core clock, 1940 MHz mem clock, power stage set to 0, 820 Watt from wall - it was stable for 14 days on Ethereum solo at 164 MH/s.

For Dual Mining I tried to even set power stage to 5 but it doesn't work either, seems like mining Pascalcoin is prioritizing over Ethereum.

I'm newbie miner, if this issue isn't software related please forgive me and ignore my post. Believe me or not, had tried to solve it by myself already.

soothaa

hero member

Activity: 1151

Merit: 528

Quote from: teomihsav on May 14, 2017, 09:03:34 AM

Quote from: soothaa on May 13, 2017, 09:10:58 AM

For those waiting on the info for the MSI Z170A M5 Gaming board and 7x GPU support I finally have it working on both of my boards.

1) Make sure you're running the latest BIOS!
2) Enable 4G
3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES
4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS
5) Plug your monitor into the ONBOARD graphics
6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!)

My 14x GPUs have been stable all night long!

How did you manage to reduce power from the wall? I bring up 10 video cards but the power is nearly 1700watts. I have try with moded bios but no difference. On W10 i have managed for 6 v. cards to consume less than 800watts.
SM is a great thing but without voltage control is not acceptable.

I haven't done anything nor have I even checked the draw. I did use the Powerstage feature and all the cards are set on 0.

Quote from: citronick on May 14, 2017, 09:24:04 AM

hmmm.... if only we can build a "flashing rom utility thumbdrive" Tongue

If I get time at work tomorrow I'll try and compile the tool in the same kind of environment and see if it'll work. I may also be taking down a couple of the rigs for migration today and I'll see if I can increase the /tmp space that way.

Quote from: quick1unc on May 14, 2017, 08:34:22 AM

so i was finally able to get the usb drive recognized but it doesn't boot, just a garbled colored screen, so i'm guessing I have some sort of hardware issue. Would boot into windows but crashes with a driver issue everytime you try to start any mining program or anything that loads the gpu. This is with 3 different gpu's run 1 at a time, both stock bios and modded.

This is normal with 4G enabled. Did you follow my instructions? Is your monitor plugged into the onboard GPU?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: soothaa on May 14, 2017, 08:47:47 AM

Quote from: citronick on May 14, 2017, 08:02:13 AM

Hi guys,

anyone got this working in smos or any linux build?

any linux experts can show how to install and make the file...

i hate going back and forth to windows and gpuz to see what memory brand is being used to flash the correct custom roms.

flashing roms using atiflash on linux is so much easier compared to windows

thanks

Quote from: citronick on May 12, 2017, 09:54:56 AM

Tytanick - any chance in putting this tool in utility folder in next version of smOS? Thanks

Quote from: ?? on ??

Quote from: soothaa on May 12, 2017, 09:43:08 AM

Quote from: ?? on ??

That's not - oops. I misread. YES, amdmeminfo will show you the VRAM type. I read VRM manufacturer >.>

Crud. Doesn't look like it supports the 500 series. Guess I can probably figure out what to do from the source though.

Use this one: https://github.com/sling00/amdmeminfo

I have not been able to get it to build due to a lack of /tmp space to build it :/

hmmm.... if only we can build a "flashing rom utility thumbdrive" Tongue

teomihsav

newbie

Activity: 72

Merit: 0

Quote from: soothaa on May 13, 2017, 09:10:58 AM

For those waiting on the info for the MSI Z170A M5 Gaming board and 7x GPU support I finally have it working on both of my boards.

1) Make sure you're running the latest BIOS!
2) Enable 4G
3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES
4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS
5) Plug your monitor into the ONBOARD graphics
6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!)

My 14x GPUs have been stable all night long!

How did you manage to reduce power from the wall? I bring up 10 video cards but the power is nearly 1700watts. I have try with moded bios but no difference. On W10 i have managed for 6 v. cards to consume less than 800watts.
SM is a great thing but without voltage control is not acceptable.

soothaa

hero member

Activity: 1151

Merit: 528

Quote from: citronick on May 14, 2017, 08:02:13 AM

Hi guys,

anyone got this working in smos or any linux build?

any linux experts can show how to install and make the file...

i hate going back and forth to windows and gpuz to see what memory brand is being used to flash the correct custom roms.

flashing roms using atiflash on linux is so much easier compared to windows

thanks

Quote from: citronick on May 12, 2017, 09:54:56 AM

Tytanick - any chance in putting this tool in utility folder in next version of smOS? Thanks

Quote from: ?? on ??

Quote from: soothaa on May 12, 2017, 09:43:08 AM

Quote from: ?? on ??

That's not - oops. I misread. YES, amdmeminfo will show you the VRAM type. I read VRM manufacturer >.>

Crud. Doesn't look like it supports the 500 series. Guess I can probably figure out what to do from the source though.

Use this one: https://github.com/sling00/amdmeminfo

I have not been able to get it to build due to a lack of /tmp space to build it :/

quick1unc

full member

Activity: 289

Merit: 107

so i was finally able to get the usb drive recognized but it doesn't boot, just a garbled colored screen, so i'm guessing I have some sort of hardware issue. Would boot into windows but crashes with a driver issue everytime you try to start any mining program or anything that loads the gpu. This is with 3 different gpu's run 1 at a time, both stock bios and modded.

vacs03

member

Activity: 63

Merit: 10

Quote from: tytanick on May 13, 2017, 03:32:04 PM

Quote from: vacs03 on May 13, 2017, 11:40:26 AM

Hi, I have two questions:

1. Did anyone get 8 gpus working on this OS?
2. What does this mean?

Yes, I gues Pandaminers with 8 gpus ? If not then other configurations, yes.

MSI Z270-A PRO
it must have latest firmware !!!
4g encoding.
make integrated gpu as default
disable audio
set pci-gen to auto or 1 or 2 (dont renember right now Tongue

)
If you will still have problem i will look into my bios tell me if this worked for you.
Also see what soothaa wrote below, after you check those please tell me which image did worked

I'm just asking in advance as I didn't yet buy two more cards so I'm running on 6 gpus right now

many tnx for your OS as I have been trying to get my rig to work on windows for the last 7 days with no luck, on your OS everything works so far so good

just to sum up:

6x sapphire rx570 pulse (elpida)
6x pci-e x1 to pci-e x16 usb risers v003
asus prime h270 plus
celeron g3900
4gb ddr4 ram
16gb usb drive
2x fortron hyper 700w

modded bios on all gpus (strap from 1500 copied to 1625, 1750, 2000)
bios settings: 4g encoding enabled, DMI/OPI Config & Peg port on auto, disabled audio, integrated gpu as default
oc settings in smOS: core 1132MHz, mem 1975MHz, power level 1

solo eth: 170MH/s @ 900w
dual eth + pasc: 169.4MH/s + 1694MH/s @ 1104W

keep up the good work Grin

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Hi guys,

anyone got this working in smos or any linux build?

any linux experts can show how to install and make the file...

i hate going back and forth to windows and gpuz to see what memory brand is being used to flash the correct custom roms.

flashing roms using atiflash on linux is so much easier compared to windows

thanks

Quote from: citronick on May 12, 2017, 09:54:56 AM

Tytanick - any chance in putting this tool in utility folder in next version of smOS? Thanks

Quote from: ?? on ??

Quote from: soothaa on May 12, 2017, 09:43:08 AM

Quote from: ?? on ??

That's not - oops. I misread. YES, amdmeminfo will show you the VRAM type. I read VRM manufacturer >.>

Crud. Doesn't look like it supports the 500 series. Guess I can probably figure out what to do from the source though.

Use this one: https://github.com/sling00/amdmeminfo

quick1unc

full member

Activity: 289

Merit: 107

Quote from: bittawm on May 14, 2017, 03:57:24 AM

can someone give me an example of how the config file text should look to start mining on miningpoolhub ?

My point was making sure that's what was supposed to happen....
When i put it in the mining rig it doesn't show up on the device list under boot list. How do I boot from it?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: crypticj on May 14, 2017, 01:18:18 AM

tytanick thank you for uploading the files so quickly however they might be corrupted i tried 3 different pc and 3 different USB drives I get error "Operation Terminated at offset " on HDD RAW copy around 49% or so.

Can some one please confirm that also.

1) Use HDD Raw copy 1.10 tool
2) Burn Image simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc OR simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc
from https://simplemining.net/download/

Please confirm that you are either able to burn the whole image or not.

Thank you.

They are ok.
This is image of 16GB pendrive so when o 8GB you have error in 40% then its ok.
Go and boot it

thefixxxer

newbie

Activity: 15

Merit: 0

Quote from: bittawm on May 14, 2017, 03:57:24 AM

can someone give me an example of how the config file text should look to start mining on miningpoolhub ?

for the config file you just put your email address in, you'll then need to log into the dashboard on the website to enter in wallet info and command parameters for your wallets

bittawm

legendary

Activity: 1894

Merit: 1087

can someone give me an example of how the config file text should look to start mining on miningpoolhub ?

Zimmsquad

member

Activity: 108

Merit: 10

Quote from: quick1unc on May 14, 2017, 01:38:17 AM

When i make the bootable usb drive and the program completes the burn, it shows up as 2 drives on my main pc. One with the config file and another one I can't acess, just says I need to format that drive.

Same thing happens to me, what's your point? Put your email in the config file, save it, eject and put into the mining rig

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: quick1unc on May 14, 2017, 01:38:17 AM

When i make the bootable usb drive and the program completes the burn, it shows up as 2 drives on my main pc. One with the config file and another one I can't acess, just says I need to format that drive.

Are you using HDD RAw copy ?

quick1unc

full member

Activity: 289

Merit: 107

When i make the bootable usb drive and the program completes the burn, it shows up as 2 drives on my main pc. One with the config file and another one I can't acess, just says I need to format that drive.

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: tytanick on May 13, 2017, 05:22:13 PM

Quote from: crypticj on May 13, 2017, 04:30:18 PM

Tytanik thank you for the instructions however the older images are no longer available.

simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc

Links don't work.

https://bitcointalksearch.org/topic/m.18803001

Unless they were moved.

Thank you

Hi, please try again in 5 min from this post.
I am reuploading them right now

https://simplemining.net/download/

tytanick thank you for uploading the files so quickly however they might be corrupted i tried 3 different pc and 3 different USB drives I get error "Operation Terminated at offset " on HDD RAW copy around 49% or so.

Can some one please confirm that also.

1) Use HDD Raw copy 1.10 tool
2) Burn Image simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc OR simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc
from https://simplemining.net/download/

Please confirm that you are either able to burn the whole image or not.

Thank you.

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 465. (Read 835786 times)