Pages:
Author

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 48. (Read 836157 times)

sr. member
Activity: 2142
Merit: 353
Xtreme Monster
Thanks, I will send you an email. As far as I know, what happens in Windows 10 is that as soon as Windows recognizes there is a known wifi signal, it will connect to it. The first setup is important. In Windows when there is a total power failure and then it returns, the wifi is always accessible. Yeah, is not straight recognizable like LAN, will usually take few seconds every time the computer is restarted.
Linux is TOTALLY different + we have many scripts that do all kind of stuff. So we just need to test if nothing fails Smiley
OK waiting for email.

Yea, totally, email sent.
member
Activity: 714
Merit: 12
Update v1284:
- Improved sending rig data to server during startup phase.
- Improved time and date synchronization.
- Making sure during startup that all AMD GPU cards are initialized during startup before first running miner.
legendary
Activity: 2660
Merit: 1096
Simplemining.net Admin
Thanks, I will send you an email. As far as I know, what happens in Windows 10 is that as soon as Windows recognizes there is a known wifi signal, it will connect to it. The first setup is important. In Windows when there is a total power failure and then it returns, the wifi is always accessible. Yeah, is not straight recognizable like LAN, will usually take few seconds every time the computer is restarted.
Linux is TOTALLY different + we have many scripts that do all kind of stuff. So we just need to test if nothing fails Smiley
OK waiting for email.
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
Recently i am using Tp-Link Deco as mesh wifi and i must say that those wifi are pretty stable and they actually work pretty well with seamless roaming around whole house.
I previously tested also Velop and Netgear Orbi which are just massacre ....
TP-link Deco AC2200 is super stable and very fast but it has one problem (ping spikes) which are not good for gaming, Beside that i recommend them Smiley
https://community.tp-link.com/en/home/forum/topic/201302 (spikes problem - ONLY one problem while other Mesh wifi had like TON of them Cheesy)
Maybe those new deco AX standard will be even better.

These spikes rarely happen if the wifi network is well set with a good router, I mean, one should always check how the connection between the computer host is with the router, the better Signal Strength (dBm), less likely these spikes will happen.

If you want to test our WiFi support, please email me at [email protected] - i will send you soon image for tests.
We need to do few more tests like what happen if rig boots when wifi is not yet acessible (after power failure), or when wifi will lose signal and then comes back.
Also we need to add feature so that those settings of wifi SSID and password will be preserved after doing reflash image Action from dashboard.

Thanks, I will send you an email. As far as I know, what happens in Windows 10 is that as soon as Windows recognizes there is a known wifi signal, it will connect to it. The first setup is important. In Windows when there is a total power failure and then it returns, the wifi is always accessible. Yeah, is not straight recognizable like LAN, will usually take few seconds every time the computer is restarted.
legendary
Activity: 2660
Merit: 1096
Simplemining.net Admin
Thanks, I'm just waiting for that, wifi is good and bad for various reasons, I know a friend that fried his PC because his lte router was struck by lightning, his lte router was connected directly to his computer via ethernet, yeah is rare but it happens in some parts of the world where lightning is constant, if you know how to do it properly, wifi is good, just make sure there are no more than 8 computers in your wifi network and where you live there are not many 2.4ghz radio connections, and you should be fine.
Recently i am using Tp-Link Deco as mesh wifi and i must say that those wifi are pretty stable and they actually work pretty well with seamless roaming around whole house.
I previously tested also Velop and Netgear Orbi which are just massacre ....
TP-link Deco AC2200 is super stable and very fast but it has one problem (ping spikes) which are not good for gaming, Beside that i recommend them Smiley
https://community.tp-link.com/en/home/forum/topic/201302 (spikes problem - ONLY one problem while other Mesh wifi had like TON of them Cheesy)
Maybe those new deco AX standard will be even better.
If you want to test our WiFi support, please email me at [email protected] - i will send you soon image for tests.
We need to do few more tests like what happen if rig boots when wifi is not yet acessible (after power failure), or when wifi will lose signal and then comes back.
Also we need to add feature so that those settings of wifi SSID and password will be preserved after doing reflash image Action from dashboard.
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
Any ETA on adding wifi?
Few more tests and it should be released.
Might be added in new image that will be released very soon.
I would still say 2-4 weeks. It is not our priority subject and we highly do not recommend it as wifi = more troubles.

Thanks, I'm just waiting for that, wifi is good and bad for various reasons, I know a friend that fried his PC because his lte router was struck by lightning, his lte router was connected directly to his computer via ethernet, yeah is rare but it happens in some parts of the world where lightning is constant, if you know how to do it properly, wifi is good, just make sure there are no more than 8 computers in your wifi network and where you live there are not many 2.4ghz radio connections, and you should be fine.
legendary
Activity: 2660
Merit: 1096
Simplemining.net Admin
Any ETA on adding wifi?
Few more tests and it should be released.
Might be added in new image that will be released very soon.
I would still say 2-4 weeks. It is not our priority subject and we highly do not recommend it as wifi = more troubles.
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
member
Activity: 714
Merit: 12
Miners update:
- bminer-v16.3.0 (Support 6G cards for Cuckatoo32. Initial support for ETH mining on AMD RX 5500/5600/5700. Fix compatibility issues when mining ETH on 4G cards)
member
Activity: 714
Merit: 12
Update v1283:
- Updated amdvbflashtool  to version 4.71 (Added support for Navi22. Added -cu_count option - calculates the number of CUs)
- Fixed units per GPU in stats for TT-Miner
member
Activity: 714
Merit: 12
Miners update:
- ethminer-v0.19.0 (beta release)
member
Activity: 714
Merit: 12
Miners update:
- gminer-v2.21 (Major performance improvement for BeamHashIII)
member
Activity: 714
Merit: 12
Miners update:
- lolminer-v1.06 (Added support for Cuckaroo-29B (Bittube) for 6G+ GPUs and Cuckaroo-29S (Swap) for 6G+ GPUs. New option--devicesbypcie to make --devices option recognize PCIE-Bus:PCIE-Address pairs instead of the normal numberation. Added currently connected pool and total uptime of the miner to the longer statistics. Improved Beam stratum: For Beam the miner now can distinguish between stale and normal rejected shares. Requires pool to send block height (Nicehash). Assignment of shares towards GPUs should now work better. Fixed bug: Beam Hash III 3G miner not starting up in 1.05. Fixed bug: Beam Hash III not starting up on older revisions of the Blockchain driver. Fixed bug: Miner crashed when a CPU only OpenCL platform (e.g. pocl) was found)
legendary
Activity: 2660
Merit: 1096
Simplemining.net Admin
trying to set up zil pool on phonix miner having issues any ideas ?

https://docs.google.com/document/d/11ZMfxKtdyy__8xPDFJFgj0m4P3ZBQGQkgXCX9mH8k3Y/edit

Faster answer you would get on Discord but here:

-pool sg-zil.rustpool.xyz:8008 -wal 0xxxxx -pass [email protected]:4444@8G -worker $rigName -proto 2

that was my zil config
-pool sg-zil.rustpool.xyz:8008 -wal 0xxxxx -pass [email protected]:4444@4G -worker $rigName -proto 2
member
Activity: 714
Merit: 12
Miners update:
- nanominer-v1.10.0 (Added KawPoW (Ravencoin) algorithm support for Nvidia. Includes several know-how memory optimizations for longer mining on a 3 GB Nvidia cards)
full member
Activity: 1148
Merit: 132
legendary
Activity: 2660
Merit: 1096
Simplemining.net Admin
Update v1282
- If you want to flash nvidia via SSH, you can now unload all modules using special command: nvidiaunload, then you can flash your GPUs
- Improved output information for detecting problems with network. Checks if rig got DHCP address and if can ping google, cloudflare and simplemining
- Improved "Unknown Memory" type reading for VEGA/NAVI GPUs
member
Activity: 714
Merit: 12
Miners update:
- cryptodredge-v0.24.0 (Improved Argon2d (NIM).  Add --recompute option to set memory reduction factor (argon2d-nim). Fix high CPU usage on MTP/Argon2/CryptoNight. Slightly improved Chukwa (Argon2-512) and Ninja (Argon2-256). Fix memory leaks in MTP. New CryptoNightTLO and Sha256csm  algorithms. Fix CryptoNightHaven issue related to Unsupported blob size. Add --sni option to enable SNI for the pool connection. Other minor fixes)
member
Activity: 714
Merit: 12
Miners update:
- lolminer-v1.05 (Improved performance Beam Hash III for all supported GPUs 4G+ 4-8%. Added highly experimental support (untested) for Beam Hash III on blockchain drivers for Polaris 10, Fiji and Hawaii GPUs. Added highly experimental support (untested) for Beam Hash III on Kepler (SM 3.2 and higher) GPUs, Requires CUDA 9+ compatible SimpleMiningOS image. Fixed bug with mining Cuckarood-29 not starting up. Fixed bug with mining on Nvidia GPUs crashed after few seconds when NVML library was not found. Fixed bug with mining Beam Hash III on some 8G cards did not start up (because of failed to allocate more memory on some systems)
legendary
Activity: 2660
Merit: 1096
Simplemining.net Admin
Teamredminer when try to connect to ethmine its got an error

Please copy this error here or directly into Discord general channel.
Pages:
Jump to: