Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 546. (Read 835786 times)
January 23, 2017, 08:01:37 AM
is there a way to change the e-mail adreess remotly?
January 23, 2017, 07:50:32 AM
you are right... but maybe optiminer on SM still will be faster than CM on 1.5... lets see..Also, can i OC each card individually on a rig?
UPDATE 1058:
- optiminer-zec v1.5
Note: you need to reload/reboot rig (and remember that optiminer requires lower memory clocks than eth, it will hang gpus at the same clocks propably
great!
btw, my wish list:
1. GPU card groups per miner app
2. "Profitability switching"
1. is my on my top list
2. This is very hard and will cause many problems so i suppose i wont do that soon.
Switching for example from claymore-eth to optiminer-zec causes many problems. You need lower memory speeds, and rig is hanging when you wont change memory.
January 23, 2017, 07:35:31 AM
you are right... but maybe optiminer on SM still will be faster than CM on 1.5... lets see..Also, can i OC each card individually on a rig?
UPDATE 1058:
- optiminer-zec v1.5
Note: you need to reload/reboot rig (and remember that optiminer requires lower memory clocks than eth, it will hang gpus at the same clocks propably
great!
btw, my wish list:
1. GPU card groups per miner app
2. "Profitability switching"
January 23, 2017, 07:24:22 AM
you are right... but maybe optiminer on SM still will be faster than CM on 1.5... lets see..Also, can i OC each card individually on a rig?
UPDATE 1058:
- optiminer-zec v1.5
Note: you need to reload/reboot rig (and remember that optiminer requires lower memory clocks than eth, it will hang gpus at the same clocks propably
January 23, 2017, 07:19:31 AM
we wait for update 1058 (optiminer 1.5)
+ 1 (optiminer 1.5)and hope SM fix the reports on web.. (i really prefer to use optminer)
You mean to see exactly speed like claymore shows ?
I cant do that becasue claymore has API but optiminer doesnt
you are right... but maybe optiminer on SM still will be faster than CM on 1.5... lets see..Also, can i OC each card individually on a rig?
January 23, 2017, 07:06:35 AM
we wait for update 1058 (optiminer 1.5)
+ 1 (optiminer 1.5)and hope SM fix the reports on web.. (i really prefer to use optminer)
You mean to see exactly speed like claymore shows ?
I cant do that becasue claymore has API but optiminer doesnt
January 23, 2017, 07:05:02 AM
we wait for update 1058 (optiminer 1.5)
+ 1 (optiminer 1.5)and hope SM fix the reports on web.. (i really prefer to use optminer)
January 23, 2017, 07:02:38 AM
we wait for update 1058 (optiminer 1.5)
(optiminer 1.5) January 23, 2017, 03:06:23 AM
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
Rebooting
/root/miner/claymore-zec/reboot.sh: line 3: /proc/sys/kernel/sysrq: Permission denied
/root/miner/claymore-zec/reboot.sh: line 4: /proc/sysrq-trigger: Permission denied
UPDATE 1057:WATCHDOG: GPU 2 hangs in OpenCL call, exit
Rebooting
/root/miner/claymore-zec/reboot.sh: line 3: /proc/sys/kernel/sysrq: Permission denied
/root/miner/claymore-zec/reboot.sh: line 4: /proc/sysrq-trigger: Permission denied
- added reboot.sh command with good permissions for claymore-zec miner
Tell me if its working.
January 23, 2017, 03:03:58 AM
Okay I am looking to get linux on my pandaminer.
My skills are weak in linux.
So has anyone done this ie
purchased pandaminer
purchased simpleminer
loaded the msata with linux
then booted the pandaminer
I have a blank msata and can leave the oem msata alone.
but guidance would be need for me.
My skills are weak in linux.
So has anyone done this ie
purchased pandaminer
purchased simpleminer
loaded the msata with linux
then booted the pandaminer
I have a blank msata and can leave the oem msata alone.
but guidance would be need for me.
Philip... my Panda's msata is loaded with SMos instead of USB.
Use HDDraw copy utility and burn the RX1046 image to the msata.
Then upgrade to RC3 kernel if possible it faster and more stable.
SM is free of charge until when Tytanick says its ready for production use then chargable at later date....
The Panda is working very well with SMos and all my Windows rigs are now on SMos.
I group my rigs into 2 groups (RX480s) and Non-RX480s (ie. Nanos, 390s, 370s, 290s) -- so needed 2 emails ID to register.
Group 1: 480s mining ETH CDM 7.4, and Group 2 mining ZEC CM 11.1
I still use Ethman but quite redundant now since the SM dashboard manages all rigs.
January 23, 2017, 02:58:02 AM
Tytanick...
How to fix this ?
Using Claymore zec miner; I use the -wd 1 -r 1 feature to reboot miner when GPU or OpenCL hangs.
That should trigger reboot.sh but I get this error (permission denied):
ZEC: 01/23/17-16:52:30 - New job from coinotron.com:3347
ZEC - Total Speed: 766.405 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 254.894 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s, GPU3 255.373 H/s, GPU4 256.138 H/s
GPU0 t=62C fan=25%, GPU1 t=47C fan=25%, GPU2 t=47C fan=25%, GPU3 t=61C fan=25%, GPU4 t=62C fan=25%
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
Rebooting
/root/miner/claymore-zec/reboot.sh: line 3: /proc/sys/kernel/sysrq: Permission denied
/root/miner/claymore-zec/reboot.sh: line 4: /proc/sysrq-trigger: Permission denied
How to fix this ?
Using Claymore zec miner; I use the -wd 1 -r 1 feature to reboot miner when GPU or OpenCL hangs.
That should trigger reboot.sh but I get this error (permission denied):
ZEC: 01/23/17-16:52:30 - New job from coinotron.com:3347
ZEC - Total Speed: 766.405 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 254.894 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s, GPU3 255.373 H/s, GPU4 256.138 H/s
GPU0 t=62C fan=25%, GPU1 t=47C fan=25%, GPU2 t=47C fan=25%, GPU3 t=61C fan=25%, GPU4 t=62C fan=25%
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
Rebooting
/root/miner/claymore-zec/reboot.sh: line 3: /proc/sys/kernel/sysrq: Permission denied
/root/miner/claymore-zec/reboot.sh: line 4: /proc/sysrq-trigger: Permission denied
January 23, 2017, 01:51:14 AM
I haven't purchased panda miner but glad that I tried simplemining yesterday. It is as as simple as it gets like the name implies! Instant 75 sols gain on R9 Fury running optiminer compared to V11.1. Wasn't familiar with Linux so was never able to try good stuff. Simplemining integrated all miners on 1 page to make it as simple as it gets, using 16 GB 3.0 USB drives.
Thats the idea 
Can't figure out why Rig1H is not showing stats for all 5 GPU like the other rigs, any advice 
They are all R9 Furys.
if you rebooted this rig and still there is a problem then something could be wrong with most propably risers ? They are all R9 Furys.Meaby try to switch risers in slots ? Or remove one of them ?
January 23, 2017, 01:20:46 AM
You have sensors in each gpu.
And sensors plus cables would make device more expensive.
I Wanted to be as much cheap as i can but i also i didnt want to make cheap chineese shit so it would broke in a year. Accually i even did gold plated pcbs to be more durable.
Anyway tell me how temperature sensors would help ?
I am really open to ideas and if more people say thet they wany ti have temperature sensors then i would do it.
And sensors plus cables would make device more expensive.
I Wanted to be as much cheap as i can but i also i didnt want to make cheap chineese shit so it would broke in a year. Accually i even did gold plated pcbs to be more durable.
Anyway tell me how temperature sensors would help ?
I am really open to ideas and if more people say thet they wany ti have temperature sensors then i would do it.
I have sensors for my PSU (server's type) and for ambient temperature in room, where hardware is placed. Helpful for autobalance aircondtioners...
January 23, 2017, 12:22:47 AM
Can't figure out why Rig1H is not showing stats for all 5 GPU like the other rigs, any advice They are all R9 Furys.
They are all R9 Furys. January 23, 2017, 12:06:23 AM
Okay I am looking to get linux on my pandaminer.
My skills are weak in linux.
So has anyone done this ie
purchased pandaminer
purchased simpleminer
loaded the msata with linux
then booted the pandaminer
I have a blank msata and can leave the oem msata alone.
but guidance would be need for me.
My skills are weak in linux.
So has anyone done this ie
purchased pandaminer
purchased simpleminer
loaded the msata with linux
then booted the pandaminer
I have a blank msata and can leave the oem msata alone.
but guidance would be need for me.
I haven't purchased panda miner but glad that I tried simplemining yesterday. It is as as simple as it gets like the name implies! Instant 75 sols gain on R9 Fury running optiminer compared to V11.1. Wasn't familiar with Linux so was never able to try good stuff. Simplemining integrated all miners on 1 page to make it as simple as it gets, using 16 GB 3.0 USB drives.
January 22, 2017, 10:33:44 PM
Okay I am looking to get linux on my pandaminer.
My skills are weak in linux.
So has anyone done this ie
purchased pandaminer
purchased simpleminer
loaded the msata with linux
then booted the pandaminer
I have a blank msata and can leave the oem msata alone.
but guidance would be need for me.
My skills are weak in linux.
So has anyone done this ie
purchased pandaminer
purchased simpleminer
loaded the msata with linux
then booted the pandaminer
I have a blank msata and can leave the oem msata alone.
but guidance would be need for me.
January 22, 2017, 05:29:06 PM
BTW, i think several temperature sensors would nice addition to you resetter
The monitoring software already have temperature monitoring via GPU sensors. I don't think it's a necessary additional expense for a tool that is supposed to be resetting rigs on demand or automatic when it's locked up. Claymore also have settings to disable when at certain temperature or keep it cool up and below certain temp. Current pricing for the reset tool is already at the sweet spot, additional cost will make it less appealing.
P.S I will be demoing Simplemining RIG Resetting tools with my Giant Panda farms as well as normal open air rigs Farm. See link below
https://bitcointalksearch.org/topic/m.17588677
January 22, 2017, 04:28:03 PM
BTW, i think several temperature sensors would nice addition to you resetter
You have sensors in each gpu.And sensors plus cables would make device more expensive.
I Wanted to be as much cheap as i can but i also i didnt want to make cheap chineese shit so it would broke in a year. Accually i even did gold plated pcbs to be more durable.
Anyway tell me how temperature sensors would help ?
I am really open to ideas and if more people say thet they wany ti have temperature sensors then i would do it.
January 22, 2017, 02:32:08 PM
BTW, i think several temperature sensors would nice addition to you resetter
January 22, 2017, 01:52:40 PM
As now saving resets all miners and that will be changed in near future.
I will do much more interesting stuff like rig grouping and batch changing options on those selected from list rigs.
Also pool lists needed, when you want change only current pool/
Anyway , history of previus options would be nice.
And also possibility to create config files like pool.txt for calymore. Yeah i have all those in my tasks list
Anyway i cant focus all my time on simple mining because i still need to earn for life in my other services like linux admin.Anyway i will be spending more and more on simplemining and simple hardware
Thx guys for your support.
Jump to: