Pages:
Author

Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 11. (Read 59781 times)

member
Activity: 690
Merit: 17
Code:
[FATAL  ] GPU[0]: CUDA error 74 'misaligned address' in line 355
Line 355 keeps finding reasons to crash miniZ.

Code:
[FATAL  ] GPU[1]: CUDA error 77 'an illegal memory access was encountered' in line 355
Hi Aurum420,
Are you still experiencing these issues?

The CUDA errors you're having are related to OC settings.
Our OC values work as a reference. But, there are always some differences across systems. Try to adjust your OCs a little and test again.

Regarding the error with network connection, we find no issue with connection to 2miners servers. Either they had a problem with the servers (at the time you were connecting), or possibly there was some issue on your end (possibly with your network connection).

Thank you for the feedback. Let us know if the issues persist.
Cheers
jr. member
Activity: 98
Merit: 6
Miner:   miniz
Version: 1.8z3


************ miniZ v1.8z3 ************
Number of miniZ CUDA>=[8.0] using driver CUDA[0.00] devices found: 4
Number of OpenCL[] devices found: 0
Driver:               510.73
Algo:              EQ[125,4] [smart-pers]
Telemetry:    [http://localhost:20000]
Logging::     file[/var/log/miner/miniz/miniz.log] period[10] delay[0]
Temp. limit:  [90°C]
[INFO   ] Mining fee set to 2.00%
miniZ<125,4>[01:0:00.0: 8005]: Selecting GPU#3[3] Nvidia GeForce GTX 1070 Ti
miniZ<125,4>[01:0:00.0: 8005]: Selecting GPU#2[2] Nvidia GeForce GTX 1070 Ti
miniZ<125,4>[02:0:00.0: 7999]: Selecting GPU#0[0] EVGA GeForce GTX 1080
miniZ<125,4>[02:0:00.0: 8001]: Selecting GPU#1[1] ASUS ROG Strix GTX1080 A8G Gaming
[ 0d 0h 0m03s] 79(79.0)Sol/s 171(170.8)W
 0>GTX 1080      ` 100% [52°C/ 0%] 20.08 I/s 40.05(40.05)Sol/s  43( 43.3)W clk=1885MHz mclk=5005MHz Sol/W=0.925
 1>GTX 1080      ` 100% [47°C/ 0%]  0.00 I/s  0.00( 0.00)Sol/s  46( 45.9)W clk=1898MHz mclk=5005MHz Sol/W=0.000
 2>GTX 1070 Ti   ` 100% [48°C/ 0%]  0.00 I/s  0.00( 0.00)Sol/s  41( 40.7)W clk=1885MHz mclk=4006MHz Sol/W=0.000
 3>GTX 1070 Ti   ` 100% [52°C/11%] 19.55 I/s 39.00(39.00)Sol/s  41( 41.0)W clk=1898MHz mclk=4006MHz Sol/W=0.952
[FATAL  ] GPU[1]: Driver error 999 'unknown error' in line 159

Why do I get this error with miniZ? I have tried different Nvidia drivers. Always GPU1. Have tried no OC at all. Other miners works.
newbie
Activity: 23
Merit: 0
Code:
[FATAL  ] GPU[0]: CUDA error 74 'misaligned address' in line 355
Line 355 keeps finding reasons to crash miniZ.
newbie
Activity: 23
Merit: 0
Code:
[FATAL  ] GPU[1]: CUDA error 77 'an illegal memory access was encountered' in line 355
This error seems to occur randomly. In this case it was the 2nd GPU on a computer with a pair of matching 1080 Ti's. Once it occurs that GPU stops mining and does not restart.
This computer was mining BTG using your Eco (min PL) settings. Usually closing miniZ and restarting it and it runs.
What caused it? Is there anything I can do to prevent it?
Adding a watchdog to miniZ might resolve these kinds of stoppages.
newbie
Activity: 23
Merit: 0
Code:
************ miniZ v1.8z3 ************
Number of miniZ CUDA>=[8.0] using driver CUDA[0.00] devices found: 1
Driver: 515.65
Algo: EQ[144,5] [smart-pers]
Pool#0: user[AW9u5xqLZRNnX2iF3px2knEuHi6m2zALSE.Rig26] server[us-btg.2miners.com] port[4040] ssl[no] pers[BgoldPoW]
Pool#1: user[AW9u5xqLZRNnX2iF3px2knEuHi6m2zALSE.Rig26] server[btg.2miners.com] port[4040] ssl[no] pers[BgoldPoW]
Pool#2: user[AW9u5xqLZRNnX2iF3px2knEuHi6m2zALSE.Rig26] server[asia-btg.2miners.com] port[4040] ssl[no] pers[BgoldPoW]
Telemetry: [http://localhost:20000]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [90.C]
[INFO   ] Mining fee set to 2.00%
miniZ<144,5>[06:0:00.0:10753]: Selecting GPU#0[0] EVGA GeForce RTX 2080 Ti
[ERROR  ] Cannot resolve us-btg.2miners.com

One of my computers fails every time for this error on boot up using Linux Mint 20.3 Startup Applications autostart. If I remote into this headless computer it starts fine if I click on the Run Now icon. I've tried to increasing the Delay Time but that does not help. Did it fail without even trying the two failover pools?

BTW, your BLOG is broken. I've posted messages several times and nothing ever appears so I'll post here.
member
Activity: 690
Merit: 17
Any chance to include EXCC coin on 144,5 algo? Looks it's mining but doesn't send any shares. Actually i couldn't find any --pers for this coin. Looks very profitable and promissing coin. Here is the pool....https://pool.excc.co/
Hi DragonFlight,
Thanks for your suggestion.
This will not be happening in the next version, but we'll have a look.
Cheers
member
Activity: 690
Merit: 17
Hey, just wanted to request to add --fan=xx to the overclock settings if possible, without it i still have to use msi afterburner to set the fan speed
Also cant wait for it to be better optimized for amd cards, got some i would love to mine flux with

While i am at it, here is my 2070super, 1420core, -512 memory

https://i.imgur.com/8U6tK6t.png

Cheers, Ruben

Hi Ruben,
We'll add --fanspeed in the next version!
Older drivers might not support this feature, which driver version are you using?
Your 2070 Super is great! Thanks for sharing!
Cheers
newbie
Activity: 12
Merit: 0
Any chance to include EXCC coin on 144,5 algo? Looks it's mining but doesn't send any shares. Actually i couldn't find any --pers for this coin. Looks very profitable and promissing coin. Here is the pool....https://pool.excc.co/
newbie
Activity: 4
Merit: 1
Hey, just wanted to request to add --fan=xx to the overclock settings if possible, without it i still have to use msi afterburner to set the fan speed
Also cant wait for it to be better optimized for amd cards, got some i would love to mine flux with

While i am at it, here is my 2070super, 1420core, -512 memory

https://i.imgur.com/8U6tK6t.png

Cheers, Ruben
member
Activity: 690
Merit: 17
Hi everyone,

Thank you for the feedback and for staying with us.

A new miniZ  version v1.8z3 is out with improved and increased support for AMD GPUs.

Please find miniZ version v1.8z3 @ Download page.

Changelog:

  * Added support for AMD GPUs RX 6600/6800/6900 (XT).
  * Added support for AMD RX 590.
  * Reduced stale shares on Aion.
  * Improved stability.
  * Minor bug fixes.

Check our website here.

For additional information check our Usage or FAQ pages.

Follow us on Twitter

Let us know how it goes!
Happy mining!
member
Activity: 690
Merit: 17
Hi everyone,

A new miniZ version v1.8z2 is out with improved and increased support for AMD mining –  125,4; 144,5; and ethash/etchash!

Please find miniZ version v1.8z2 @ Download page.

Changelog:
* Added AMD support for 144,5, for Ellesmere GPUs and gfx1031 (RX 6700 XT) GPUs.
* Added AMD support for ETH, for Ellesmere GPUs and gfx1031 (RX 6700 XT) GPUs.
* Fixed support for AMD GPUs, on Windows.
* Fixed issues with AMD support for 125,4 (Flux), for Ellesmere GPUs and gfx1031 (RX 6700 XT) GPUs.

Check our website here.

For additional information check our Usage or FAQ pages.

Follow us on Twitter

Let us know how it goes!
Happy mining!
member
Activity: 690
Merit: 17
Hi everyone,

A new  miniZ v1.8z is out!

Thank you for your patience and for all the feedback!

Please find miniZ v1.8z version @ Download page.

Changelog:
  * Improved performance and stability for ETH for LHR GPUs.
  * Improved performance for RTX 30XX, for 125,4 algorithm (Flux).
  * Added AMD support for 125,4 (Flux), for RX 470/480/570/580 GPUs.
  * Added FIRO support. Check How to mine Firo (Firo)? On our FAQ page.
  * GPU brand shows on log.
  * Fixed issues with SERO.
  * Fixed issues with 192,7.
  * Added option to dump pool stratum communication, --protocol-dump.
  * Added options to fix core and mem clocks. (require sudo)
    --gpuclock=[gpuclock(MHz)] to apply list of GPU clocks, works for sm>=7. Use gpuclock=1 for auto.
    --memclock=[memclock(MHz)] to apply list of memory clocks, works for sm>=7. Use memclock=1 for auto.
  * Added option to change power limit within the miniZ.
    --power=[power(W)] to apply list of power limits (requires sudo).
    or -pl [power(W)]                                           
  * Added option for SOCKS proxy specification, --socks=[proxy].
    Format [username:password@]server:port.
    The prefix username:password@ is optional.
  * Added option to let SOCKS proxy resolve DNS requests, --socksdns.
  * Added options --amd/--nvidia to select amd/nvidia GPUs, respectively.
  * Added the short average avg0 to getstat.
  * Minor bug fixes.

OCs for LHR GPUs (sudo recommended, in Linux)
We also leave here information regarding the OCs we used for testing (driver 510.54). Note that you may need to adjust a bit for your system.
We recommend using sudo in Linux when mining ETH with LHR GPUs.
    * 3060: core: -100, mem:+2990 (Linux)1, PL=115 W; ~39 MH/s
    * 3070 Ti: core: -200, mem: +4500 (Linux)1, PL=215 W; ~65 MH/s
    * 3080 Ti: core: +0, mem: +2600 (Linux)1, PL=266 W. ~79 MH/s (~84 MH/s with proper cooling)
1On Windows, memory clock with MSI Afterburner should be half of the indicated value. For example, for the 3080 Ti you need to set +1300 for memory clock in MSI Afterburner.
Note that you may need to adjust a bit for your system.

Download miniZ v1.8z version @ here page..

For additional information check the Usage or the FAQ pages.

Because some of your messages have been posted long ago (sorry about this), we suggest that you try the new version and check if this resolves the issue.
Let us know how if the problem persists.
In some particular cases we may still answer to ask for some information or clarification.

Happy mining!
newbie
Activity: 23
Merit: 0
You are quite behind with the new version.  For what you take as a percentage ... it is simply not good not to make a new version for so many months.  We have been waiting for you for almost half a year ...You have problems with some cards and do not solve them in time...
When can we expect the new version you have been promising for so long?

Version 1.8z was released yesterday but the thread wasn't updated yet
RX570 Hashrate - 15-17 Grin Grin FLUX
Absolutely not stable miner!
member
Activity: 155
Merit: 14
You are quite behind with the new version.  For what you take as a percentage ... it is simply not good not to make a new version for so many months.  We have been waiting for you for almost half a year ...You have problems with some cards and do not solve them in time...
When can we expect the new version you have been promising for so long?

Version 1.8z was released yesterday but the thread wasn't updated yet
newbie
Activity: 2
Merit: 0
You are quite behind with the new version.  For what you take as a percentage ... it is simply not good not to make a new version for so many months.  We have been waiting for you for almost half a year ...You have problems with some cards and do not solve them in time...
When can we expect the new version you have been promising for so long?
member
Activity: 325
Merit: 42
Is there a link that is WGET friendly for Linux?

I wouldn't call it wget friendly but I had success with the following cli

wget -nH -nc -O $HOME/miniZ_v1.8y3_linux-x64.tar.gz "https://miniz.ch/?smd_process_download=1&download_id=4368"

You have to get the tarball name and check the download_id which you can find when you hover over the download link (it show left-bottom with firefox)

Hope this helps.
hero member
Activity: 1274
Merit: 556
Could me issues be due to the fact I was trying to run this using old-ass Cuda?...

EDIT: nope. The 3080 juices up to almost 2000 mhz on miner startup. Thinking the default clocks have been borked.
newbie
Activity: 315
Merit: 0
Hi, miniZ dev! Please add FiroPow algo and EPIC Cash (ProgPow) dual mining.
hero member
Activity: 1274
Merit: 556
Not sure what I'm doing wrong but the rig will just crash once mini-z initialises on 125,4 on the latest beta.
Gigashyte 3080 non-LHR, stock clocks.
Updated to latest drivers, no change.
Any ideas?

EDIT: it looks like the GPU clocks quickly spike before the driver crashes.
Pages:
Jump to: