mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA... - page 12.

Elder III

sr. member

Activity: 1246

Merit: 274

Quote from: xpulse on February 17, 2018, 04:16:49 PM

Hi,

Can someone put me in right direction, why this might happen with miner.

Vega's 64 - 3 in Opteron 2218 (2.6Ghz) 8 RAM

Miner show following stat:

> Off 60.9MH/s 61.6MH/s 64.2MH/s | Temp(C): 56 40 43 47 | Fan: 39% 68% 0% 0% | HW: 0 0 0 0 | Rej: 0.0%

1 card - Off, this is how it should be this is old 7950, doesn't work good in this config.
3 Vega's show different speed, why this might happen?

Also, anyone experienced issue with Blockchain AMD drivers/Radeon Setting... Not even open to make any changes in WattMan.

Thanks.

I'm not sure if a 7950 is supported by this miner or not. I know that the 280X is supported, which is just a refreshed 7970, so it should be possible to have it work, but it might require some changes from the developer.... in any case, please share your .bat file so we can see how you have it setup.

Are all 3 of your Vega GPUs running at the exact same clocks? If they're different models they may get different hashrates, and the good old silicone lottery will make even the exact same models hash a little differently in many cases.

xpulse

newbie

Activity: 141

Merit: 0

Hi,

Can someone put me in right direction, why this might happen with miner.

Vega's 64 - 3 in Opteron 2218 (2.6Ghz) 8 RAM

Miner show following stat:

> Off 60.9MH/s 61.6MH/s 64.2MH/s | Temp(C): 56 40 43 47 | Fan: 39% 68% 0% 0% | HW: 0 0 0 0 | Rej: 0.0%

1 card - Off, this is how it should be this is old 7950, doesn't work good in this config.
3 Vega's show different speed, why this might happen?

Also, anyone experienced issue with Blockchain AMD drivers/Radeon Setting... Not even open to make any changes in WattMan.

Thanks.

Er0l

newbie

Activity: 36

Merit: 0

Quote from: Hardstyles on February 15, 2018, 10:25:35 AM

Both version same Fail 3,0,1 and 3,1.0

Code:

./example.sh 
[16:22:36 - 0 days 00:00:00] Starting mkxminer 3.0.1...                        
[16:22:38 - 0 days 00:00:01] Connecting to stratum+tls://vtc.suprnova.cc:5676 as WinMKX.test...
[16:22:38 - 0 days 00:00:01] Difficulty set to 32                              
[16:22:41 - 0 days 00:00:04] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:04] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:04] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:41 - 0 days 00:00:04] Connected!                                        
[16:22:41 - 0 days 00:00:04] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:04] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:04] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:41 - 0 days 00:00:04] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:04] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:04] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:41 - 0 days 00:00:05] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:05] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:05] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:42 - 0 days 00:00:05] clBuildProgram: -11                               
[16:22:42 - 0 days 00:00:05] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:42 - 0 days 00:00:05] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:42 - 0 days 00:00:05] --- Detected Platforms ---                        
[16:22:42 - 0 days 00:00:05] *0 AMD Accelerated Parallel Processing OpenCL 2.0 AMD-APP (2482.3)
[16:22:42 - 0 days 00:00:05] --- Detected GPUs ---                             
[16:22:42 - 0 days 00:00:05] GPU#0: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#1: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#2: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#3: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#4: ?                                          
[16:22:42 - 0 days 00:00:05]                                                   
[16:22:42 - 0 days 00:00:05] Press 'q' to exit application      [code]

[/code]

Same Here, shows Ellesmere not Supported only GNC, Dev can you please Recompile for 64Bit

thekev

newbie

Activity: 4

Merit: 0

Quote from: dallase on February 15, 2018, 10:45:01 AM

32bit compile doesnt work for me on Ubuntu 16.04.03 x86_64.

# ./mkxminer
./mkxminer: error while loading shared libraries: libOpenCL.so.1: wrong ELF class: ELFCLASS64

Code:

$ LD_LIBRARY_PATH=/opt/AMDAPPSDK-3.0/lib/x86 ./mkxminer

...but then...

Code:

[15:20:06 - 0 days 00:00:00] clGetPlatformsIDs error -1001, verify that drivers are installed properly
[15:20:06 - 0 days 00:00:00] Error: GPU devices not found
[15:20:06 - 0 days 00:00:00] Could not find any GPUs, exitting...

I have sgminer working with amdgpu-pro on the 4.4 kernel. I am pretty sure this just needs to be recompiled for 64-bit.

cwatson1982

newbie

Activity: 11

Merit: 1

For anyone having issues with lockups on newest drivers (18.2.1) and --asm, turning off compute mode makes it appear to work so far. No 0 hash rate followed by sick cards followed by requiring a system reboot!

cirlama

jr. member

Activity: 156

Merit: 1

I tried several time, but I cannot get the miner to adjust the core voltage (1 rx 480 & 1 rx 580)
(while it's working on others miners, ex: claymore's)

any ideas?

dallase

member

Activity: 129

Merit: 10

Quote from: mark9064 on February 12, 2018, 04:07:39 PM

Quote from: nixofme on February 11, 2018, 06:22:10 PM

Quote from: mark9064 on February 11, 2018, 06:15:54 PM

Quote from: nixofme on February 11, 2018, 05:45:53 PM

Quote from: mark9064 on February 11, 2018, 04:44:33 PM

Hi
Using mkxminer on linux, and it fails to start with the error "failed to load shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"
Using 6 rx570s and all other miners work fine (claymore eth, claymore zec, sgminer (all algos), xmr-stak) and more
Any ideas why it is not working? I have located the file manually (was in amd app sdk) and can copy it to any location if needed.
Thanks

I tired to get this working today on simplemining OS and was also not successful. I think mkxminer documentation says its 32bit only.

Mkxminer documentation? Do you have a link for that?

Readme file

Hmm says tested on 32bit. Hopefully will work with 64bit. Did you get the same error as me?

32bit compile doesnt work for me on Ubuntu 16.04.03 x86_64.

# ./mkxminer
./mkxminer: error while loading shared libraries: libOpenCL.so.1: wrong ELF class: ELFCLASS64

Hardstyles

member

Activity: 143

Merit: 33

Both version same Fail 3,0,1 and 3,1.0

Code:

./example.sh 
[16:22:36 - 0 days 00:00:00] Starting mkxminer 3.0.1...                        
[16:22:38 - 0 days 00:00:01] Connecting to stratum+tls://vtc.suprnova.cc:5676 as WinMKX.test...
[16:22:38 - 0 days 00:00:01] Difficulty set to 32                              
[16:22:41 - 0 days 00:00:04] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:04] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:04] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:41 - 0 days 00:00:04] Connected!                                        
[16:22:41 - 0 days 00:00:04] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:04] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:04] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:41 - 0 days 00:00:04] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:04] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:04] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:41 - 0 days 00:00:05] clBuildProgram: -11                               
[16:22:41 - 0 days 00:00:05] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:41 - 0 days 00:00:05] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:42 - 0 days 00:00:05] clBuildProgram: -11                               
[16:22:42 - 0 days 00:00:05] Frontend phase failed compilation.                
Error: Compilation from LLVMIR binary to IL text failed!
[16:22:42 - 0 days 00:00:05] Device not supported: "Ellesmere". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[16:22:42 - 0 days 00:00:05] --- Detected Platforms ---                        
[16:22:42 - 0 days 00:00:05] *0 AMD Accelerated Parallel Processing OpenCL 2.0 AMD-APP (2482.3)
[16:22:42 - 0 days 00:00:05] --- Detected GPUs ---                             
[16:22:42 - 0 days 00:00:05] GPU#0: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#1: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#2: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#3: ?                                          
[16:22:42 - 0 days 00:00:05] GPU#4: ?                                          
[16:22:42 - 0 days 00:00:05]                                                   
[16:22:42 - 0 days 00:00:05] Press 'q' to exit application      [code]

[/code]

xpulse

newbie

Activity: 141

Merit: 0

Quote from: oup59 on January 26, 2018, 08:17:05 AM

Anybody with a Vega 64 mining VTC? What are your hash values and settings?
Appreciate some feedback to use Vega 64 for VTC with this miner.

3 Vega's 64, with blockchain beta drivers ~49-52 but not stable... I have some issues with blockdriver in the system as regular drivers always stable, can't figured out what is the problem with bc driver.

testing with cc0117ac.dat file... will update with results.

wtfonly16

full member

Activity: 285

Merit: 105

miner doesnt work i said this plenty of times, its 0 hashrate with nothing happening.

loferbart

newbie

Activity: 11

Merit: 0

Anyone else get the miner going but with 0 Hashrate? I'm using the most recent blockchain driver with RX580.

oomurashin

member

Activity: 195

Merit: 15

Quote from: wudafuxup on February 11, 2018, 05:46:42 AM

Quote from: winmkx on February 11, 2018, 03:02:56 AM

Hello!

If you have a VEGA 56 or VEGA 64 videocard, please download this file and put it into mkxminer folder. Restart the miner (make sure you add --asm to command line).

This will add the ASM support for VEGA cards (about 12% extra speed), getting around 53MHs now on VEGA 56.

Thanks!

That's awesome, just tried it on a Vega Frontier and got 65Mh/s Grin

my FE got 63MH/s @1400/1099 910mV great work dev! Wink

kuzotronic

newbie

Activity: 24

Merit: 0

Quote from: nixofme on February 12, 2018, 08:19:49 AM

Windows 10 - Im getting consistently 70c temperatures(too high) with RX580s - any ideas?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://race.suprnova.cc:5650 -u -p -I 23 --auto-gpu
pause

With asm and i23 this almost max load for this miner, you can try i24 as well. This algo pushes cards higher than Eth. Just check hwinfo max power usage. Try downvolting cards by -70Mv or -100Mv.

mark9064

newbie

Activity: 3

Merit: 0

Quote from: nixofme on February 11, 2018, 06:22:10 PM

Quote from: mark9064 on February 11, 2018, 06:15:54 PM

Quote from: nixofme on February 11, 2018, 05:45:53 PM

Quote from: mark9064 on February 11, 2018, 04:44:33 PM

Hi
Using mkxminer on linux, and it fails to start with the error "failed to load shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"
Using 6 rx570s and all other miners work fine (claymore eth, claymore zec, sgminer (all algos), xmr-stak) and more
Any ideas why it is not working? I have located the file manually (was in amd app sdk) and can copy it to any location if needed.
Thanks

I tired to get this working today on simplemining OS and was also not successful. I think mkxminer documentation says its 32bit only.

Mkxminer documentation? Do you have a link for that?

Readme file

Hmm says tested on 32bit. Hopefully will work with 64bit. Did you get the same error as me?

wudafuxup

full member

Activity: 391

Merit: 105

Quote from: nixofme on February 12, 2018, 08:19:49 AM

Windows 10 - Im getting consistently 70c temperatures(too high) with RX580s - any ideas?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://race.suprnova.cc:5650 -u -p -I 23 --auto-gpu
pause

Lol wtf, why did you give us the batch file. Like that's gonna tell us anything lmao..

nixofme

newbie

Activity: 18

Merit: 0

Windows 10 - Im getting consistently 70c temperatures(too high) with RX580s - any ideas?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://race.suprnova.cc:5650 -u -p -I 23 --auto-gpu
pause

wtfonly16

full member

Activity: 285

Merit: 105

2018 and no api support Huh

nixofme

newbie

Activity: 18

Merit: 0

Quote from: mark9064 on February 11, 2018, 06:15:54 PM

Quote from: nixofme on February 11, 2018, 05:45:53 PM

Quote from: mark9064 on February 11, 2018, 04:44:33 PM

Hi
Using mkxminer on linux, and it fails to start with the error "failed to load shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"
Using 6 rx570s and all other miners work fine (claymore eth, claymore zec, sgminer (all algos), xmr-stak) and more
Any ideas why it is not working? I have located the file manually (was in amd app sdk) and can copy it to any location if needed.
Thanks

I tired to get this working today on simplemining OS and was also not successful. I think mkxminer documentation says its 32bit only.

Mkxminer documentation? Do you have a link for that?

Readme file

mark9064

newbie

Activity: 3

Merit: 0

Quote from: nixofme on February 11, 2018, 05:45:53 PM

Quote from: mark9064 on February 11, 2018, 04:44:33 PM

Hi
Using mkxminer on linux, and it fails to start with the error "failed to load shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"
Using 6 rx570s and all other miners work fine (claymore eth, claymore zec, sgminer (all algos), xmr-stak) and more
Any ideas why it is not working? I have located the file manually (was in amd app sdk) and can copy it to any location if needed.
Thanks

I tired to get this working today on simplemining OS and was also not successful. I think mkxminer documentation says its 32bit only.

Mkxminer documentation? Do you have a link for that?

nixofme

newbie

Activity: 18

Merit: 0

Quote from: mark9064 on February 11, 2018, 04:44:33 PM

Hi
Using mkxminer on linux, and it fails to start with the error "failed to load shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"
Using 6 rx570s and all other miners work fine (claymore eth, claymore zec, sgminer (all algos), xmr-stak) and more
Any ideas why it is not working? I have located the file manually (was in amd app sdk) and can copy it to any location if needed.
Thanks

I tired to get this working today on simplemining OS and was also not successful. I think mkxminer documentation says its 32bit only.

Topic: mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA... - page 12. (Read 52770 times)