MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 16.

ShosMeister

newbie

Activity: 28

Merit: 0

Quote from: nwoolls on December 03, 2014, 01:17:19 AM

Make sure you have the correct OS drivers installed:
https://github.com/nwoolls/MultiMiner/wiki/Drivers#silicon-labs-usb-to-uart-driver

Then use the Scan Hardware menu item.

Can't attach screen shots but Device Mgr shows:
Silicon Labs CP210x USB to UART Bridge (COM14)
Driver Date: 03/19/2014
Driver Version: 6.7.0.0

Quote from: nwoolls on December 03, 2014, 01:17:19 AM

If the ZeusMiner still doesn't show, I've heard reports that their newer hardware requires a lower frequency. You can specify that in MultiMiner in the settings here using the following SHA256 arguments:

Code:

--set zus:clock=248

But the ZeusMiner Thunder X6 is scrypt ASIC not SHA256 right? Still need to put that in?

Quote from: nwoolls on December 03, 2014, 01:17:19 AM

The arguments may also be needed in the Hardware scan field on the same screen.

Thought that may be so I had already added -S zus:all which I found referenced on another thread somewhere.

Quote from: nwoolls on December 03, 2014, 01:17:19 AM

Quote from: ShosMeister on December 02, 2014, 08:31:40 PM

Also, for some reason, my rockminor r-box has dissappeared Sad

Make sure you have the correct drivers installed and / or try reinstalling them (same driver as above).

Tried that and the scan hardware doesn't show it up. Was mostly asking in case anyone knew how to verify it was actually connected to the machine or did it die/have a bad cable - already tried a new cable and multiple ports Sad

Thanks!

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ShosMeister on December 02, 2014, 08:31:40 PM

Having a problem getting my zeusminer to show up. Not sure if it's the miner or configs and thought I'd ask here.

Make sure you have the correct OS drivers installed:
https://github.com/nwoolls/MultiMiner/wiki/Drivers#silicon-labs-usb-to-uart-driver

Then use the Scan Hardware menu item.

If the ZeusMiner still doesn't show, I've heard reports that their newer hardware requires a lower frequency. You can specify that in MultiMiner in the settings here using the following SHA256 arguments:

Code:

--set zus:clock=248

The arguments may also be needed in the Hardware scan field on the same screen.

Quote from: ShosMeister on December 02, 2014, 08:31:40 PM

Also, for some reason, my rockminor r-box has dissappeared Sad

Make sure you have the correct drivers installed and / or try reinstalling them (same driver as above).

ShosMeister

newbie

Activity: 28

Merit: 0

Having a problem getting my zeusminer to show up. Not sure if it's the miner or configs and thought I'd ask here. Also, for some reason, my rockminor r-box has dissappeared Sad

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: bensam123 on November 30, 2014, 12:17:57 AM

Didn't mean it as offensive. You can see the process/api/history at the bottom without having to switch through pages. Basically everything you need to see is on one page.

Thank you for the details - that paints a much clearer picture for me.

It's understandable and a foreseen objection. Version 3.7 saw a consolidation of the various tabbed, single-window and multi-window areas into a single toolbar along the left-hand-side (Side Bar).

While the old style may be resurrected, as is I am the sole maintainer of the app it is very difficult to maintain multiple code paths — especially ones I do not personally use.

As always I welcome anyone who wants to contribute to the application. It becomes easier with every passing day as Microsoft Open Sources more of the .NET framework. There are instructions that get you debugging MultiMiner on the OS of your choice here.

bensam123

sr. member

Activity: 423

Merit: 250

Didn't mean it as offensive. You can see the process/api/history at the bottom without having to switch through pages. Basically everything you need to see is on one page.

Axiste

full member

Activity: 152

Merit: 100

No worries, done as requested

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Axiste on November 29, 2014, 04:39:51 PM

came up against the display issue again

the stats in the middle are frozen, the Ant and the proxy arent showing at all, but they are running and have shares.
as can be seen the 2 share counts for the prospero dont match

http://ocau.com/pix/mpv8i

Thanks for the cap. Can you give me a bit more info?

For instance, does any of the information in the main list update when this happens?
Is some of it "stuck", or all of it?
Does it ever snap out of it?
Have you found a work-around, e.g. does restarting mining fix things or do you have to restart the app.

Edit: In fact, if you don't mind answering this & posting the screen cap here: http://issues.multiminerapp.com it will very much help me keep things in order and keep the details of your issue straight

Axiste

full member

Activity: 152

Merit: 100

came up against the display issue again

the stats in the middle are frozen, the Ant and the proxy arent showing at all, but they are running and have shares.
as can be seen the 2 share counts for the prospero dont match

http://ocau.com/pix/mpv8i

Edit: some reason i posted this in the new BFGMiner thread instead of here lol Huh

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: bensam123 on November 29, 2014, 03:35:48 AM

Yeah, this is the worst time to implement a product for mining. For GPU miners there is null or negative income right now. I can't afford it and I thought this was just a UI redesign so I was going to ask for a classic option, but it looks like it's a way to push the subs. I'll be reverting to 3.6.11 as the current version is very messy without the subscription and probably not updating from there.

Can you tell me how 3.6.11 is less "messy" than 3.7?

bensam123

sr. member

Activity: 423

Merit: 250

Yeah, this is the worst time to implement a product for mining. For GPU miners there is null or negative income right now. I can't afford it and I thought this was just a UI redesign so I was going to ask for a classic option, but it looks like it's a way to push the subs. I'll be reverting to 3.6.11 as the current version is very messy without the subscription and probably not updating from there.

rollingMyCar

member

Activity: 112

Merit: 10

Quote from: nwoolls on November 23, 2014, 03:45:02 AM

MultiMiner version 3.7 is now available for download with the following changes:

Added support for WhatMine.com as a source of coin profitability
Added integration of the Dashboard and History from the MobileMiner HTML5 app
Standardized various tabbed, windowed, and embedded panes in a new toolbar

If you have any feature requests or issues please log them here:

http://issues.multiminerapp.com

And for help on using the app, see:

http://help.multiminerapp.com

Finally, to learn how to contribute, visit:

http://contribute.multiminerapp.com

Happy mining!

hi nwoolls!!!

realy good work!!!
I like the fantastic features!!!

specially, i like the graphic template too!!!

can you tell me the name plz???

thanks!!!

Axiste

full member

Activity: 152

Merit: 100

Ah ok, will give it a go tonight after i repair my cat6 cables... Rat chewed through both main trunks running from one end of the house to the other last night.. Will get a screenshot next time the other issue happens

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Axiste on November 26, 2014, 05:38:59 AM

Trying to get the proxy working, no matter what I do, it wont appear in my list of devices. Bottom right corner tells me I have 4 devices when I only have 3, and it doesnt change with proxy turned on or off.
Running Windows Server 2012 R2 Essentials.

Also find that after a random time, the main stats stop updating, but if i click the miner and bring up the advanced details on the right, the accepted shares etc will be correct there.

The proxy only shows after you scan for hardware. It is understandably a source of confusion, and I've thought of other ways to do it but haven't come up with anything elegant yet.

In other words, you need to enable the proxy, click OK out of settings, then right-click and Scan Hardware. Then the proxy device(s) will show.

The next time the 2nd issue happens can you create a few screenshots and post them?

Axiste

full member

Activity: 152

Merit: 100

Trying to get the proxy working, no matter what I do, it wont appear in my list of devices. Bottom right corner tells me I have 4 devices when I only have 3, and it doesnt change with proxy turned on or off.
Running Windows Server 2012 R2 Essentials.

Also find that after a random time, the main stats stop updating, but if i click the miner and bring up the advanced details on the right, the accepted shares etc will be correct there.

AJinNYC

member

Activity: 84

Merit: 10

Bored with you morons.

Quote from: nwoolls on November 25, 2014, 11:29:31 AM

Based on some light Googling it looks like it may be a problem with Mono 2.10.3. Maybe try a different version of Mono?

System.EntryPointNotFoundException: GdipCreateFromContext_macosx

No dice... I'll just keep the Windows 8 system I have for mining. Was hoping to convert the Windows laptop to my media laptop because it has an HDMI output, but I guess I'll just have to spend the $10 to buy a Thunderbolt to HDMI cable to use the MacBook as the media laptop.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: AJinNYC on November 25, 2014, 09:54:22 AM

Looking for some help with installation on Mac OS X.

I follow the directions on github, but when I try to launch via terminal I get this:

Quote

WARNING: CFSTR("\37777777742\37777777634\37777777626") has non-7 bit chars, interpreting using MacOS Roman encoding for now, but this will change. Please eliminate usages of non-7 bit chars (including escaped characters above \177 octal) in CFSTR().
System.EntryPointNotFoundException: GdipCreateFromContext_macosx
  at (wrapper managed-to-native) System.Drawing.GDIPlus:GdipCreateFromContext_macosx (intptr,int,int,intptr&)
  at System.Drawing.Graphics.FromHwnd (IntPtr hwnd) [0x00000] in :0
  at System.Windows.Forms.XplatUICarbon.PaintEventStart (System.Windows.Forms.Message& msg, IntPtr handle, Boolean client) [0x00000] in :0
  at System.Windows.Forms.XplatUI.PaintEventStart (System.Windows.Forms.Message& msg, IntPtr handle, Boolean client) [0x00000] in :0
  at System.Windows.Forms.Control.WmPaint (System.Windows.Forms.Message& m) [0x00000] in :0
  at System.Windows.Forms.Control.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
  at System.Windows.Forms.DataGridView.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
  at System.Windows.Forms.Control+ControlWindowTarget.OnMessage (System.Windows.Forms.Message& m) [0x00000] in :0
  at System.Windows.Forms.Control+ControlNativeWindow.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
  at System.Windows.Forms.NativeWindow.WndProc (IntPtr hWnd, Msg msg, IntPtr wParam, IntPtr lParam) [0x00000] in :0
System.EntryPointNotFoundException: GdipCreateFromContext_macosx
  at (wrapper managed-to-native) System.Drawing.GDIPlus:GdipCreateFromContext_macosx (intptr,int,int,intptr&)
  at System.Drawing.Graphics.FromHwnd (IntPtr hwnd) [0x00000] in :0

And I get a pop-up box that has a title of "Progress" with the actual box being blank. From there it just hangs and does nothing.

Based on some light Googling it looks like it may be a problem with Mono 2.10.3. Maybe try a different version of Mono?

System.EntryPointNotFoundException: GdipCreateFromContext_macosx

AJinNYC

member

Activity: 84

Merit: 10

Bored with you morons.

Looking for some help with installation on Mac OS X.

I follow the directions on github, but when I try to launch via terminal I get this:

Quote

WARNING: CFSTR("\37777777742\37777777634\37777777626") has non-7 bit chars, interpreting using MacOS Roman encoding for now, but this will change. Please eliminate usages of non-7 bit chars (including escaped characters above \177 octal) in CFSTR().
System.EntryPointNotFoundException: GdipCreateFromContext_macosx
at (wrapper managed-to-native) System.Drawing.GDIPlus:GdipCreateFromContext_macosx (intptr,int,int,intptr&)
at System.Drawing.Graphics.FromHwnd (IntPtr hwnd) [0x00000] in :0
at System.Windows.Forms.XplatUICarbon.PaintEventStart (System.Windows.Forms.Message& msg, IntPtr handle, Boolean client) [0x00000] in :0
at System.Windows.Forms.XplatUI.PaintEventStart (System.Windows.Forms.Message& msg, IntPtr handle, Boolean client) [0x00000] in :0
at System.Windows.Forms.Control.WmPaint (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Control.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.DataGridView.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Control+ControlWindowTarget.OnMessage (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Control+ControlNativeWindow.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.NativeWindow.WndProc (IntPtr hWnd, Msg msg, IntPtr wParam, IntPtr lParam) [0x00000] in :0
System.EntryPointNotFoundException: GdipCreateFromContext_macosx
at (wrapper managed-to-native) System.Drawing.GDIPlus:GdipCreateFromContext_macosx (intptr,int,int,intptr&)
at System.Drawing.Graphics.FromHwnd (IntPtr hwnd) [0x00000] in :0
at System.Windows.Forms.XplatUICarbon.PaintEventStart (System.Windows.Forms.Message& msg, IntPtr handle, Boolean client) [0x00000] in :0
at System.Windows.Forms.XplatUI.PaintEventStart (System.Windows.Forms.Message& msg, IntPtr handle, Boolean client) [0x00000] in :0
at System.Windows.Forms.Control.WmPaint (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Control.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Label.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Control+ControlWindowTarget.OnMessage (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.Control+ControlNativeWindow.WndProc (System.Windows.Forms.Message& m) [0x00000] in :0
at System.Windows.Forms.NativeWindow.WndProc (IntPtr hWnd, Msg msg, IntPtr wParam, IntPtr lParam) [0x00000] in :0

And I get a pop-up box that has a title of "Progress" with the actual box being blank. From there it just hangs and does nothing.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Great job Nate!
You always keep cranking out updates.
That is the reason I recommend MM to everyone. It just gets better and better.

Quote from: nwoolls on November 23, 2014, 03:03:38 PM

Quote from: Axiste on November 23, 2014, 02:55:50 PM

looks excellent, unfortunately got my hopes up as I dont have a subscription to the stats on your website, and wont for as much as I wish to support you, my BTC income is almost less than the sub fee. Pictures make it look pretty good though for those who have got a sub to the stats on the webapp.

Correct - the Dashboard in 3.7 is an integration of the MobileMiner HTML5 app which, while free, requires a $4.99/mo subscription in order to cover the retention of the stats if you want a Dashboard and History Charts. For that you get a Dashboard, History, and support for additional hosts hitting the Open API. You also get an Open Source solution for embedding that information wherever you want (as MultiMiner 3.7 does).

But hey - not everyone can afford $4.99/mo! So no biggy. That's why there's a free account. Grin

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Axiste on November 23, 2014, 02:55:50 PM

looks excellent, unfortunately got my hopes up as I dont have a subscription to the stats on your website, and wont for as much as I wish to support you, my BTC income is almost less than the sub fee. Pictures make it look pretty good though for those who have got a sub to the stats on the webapp.

Correct - the Dashboard in 3.7 is an integration of the MobileMiner HTML5 app which, while free, requires a $4.99/mo subscription in order to cover the retention of the stats if you want a Dashboard and History Charts. For that you get a Dashboard, History, and support for additional hosts hitting the Open API. You also get an Open Source solution for embedding that information wherever you want (as MultiMiner 3.7 does).

But hey - not everyone can afford $4.99/mo! So no biggy. That's why there's a free account. Grin

Axiste

full member

Activity: 152

Merit: 100

looks excellent, unfortunately got my hopes up as I dont have a subscription to the stats on your website, and wont for as much as I wish to support you, my BTC income is almost less than the sub fee. Pictures make it look pretty good though for those who have got a sub to the stats on the webapp.

Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 16. (Read 827340 times)