Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 9. (Read 827344 times)
March 11, 2015, 09:30:24 AM
When switching scrypt or sha coins in MM or mobileminer my gpus switch to is there a way I can stop it from happening thanks
March 07, 2015, 11:40:55 PM
@nwoolls - Looks like the api is definitely being dropped by the Antminer S5. I have S3+ that do not drop the API. How can I help getting it fixed. I have another monitoring app that does not have the problem but I prefer yours. Thanks in advance
- Look for a firmware update from BitMain that fixes the issue you are seeing
- OR try installing the official CGMiner binary on your AntMiner: https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
- OR try setting the MultiMiner option to restart / reboot your Network Devices every X hours: https://github.com/nwoolls/MultiMiner/wiki/Settings#advanced-miner-settings
If the miner isn't responding to RPC API commands it's not going to show / work in MultiMiner.
March 07, 2015, 11:37:10 PM
Ok so I have imported the miner into the software and set up in advanced section however. I do not think going to work because their is no option to scan for hard drives as only detects usb asic and port dependent hardware. If their was option to scan or so might work.
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
This only works with forks of CGMiner and BFGMiner that adopt their standard RPC API. It will not work with "any old miner" executable. From what you are describing I doubt this would work.
What is the backend miner specifically?
Edit: thanks btw, I updated the wiki to mention the RPC API requirement.
I know it is not based sgminer from looking at the creator http://burstcoin.eu/download/14-blago%27s-burst-miner so unsure if will work as you said doubtful will work.
What I would need is documentation for their API if there is one. I don't see anything on their website or Github page:
https://github.com/Blagodarenko/miner-burst/
If there is an API for their miner it's possible to add support to MultiMiner.
March 07, 2015, 11:29:50 PM
@nwoolls - Looks like the api is definitely being dropped by the Antminer S5. I have S3+ that do not drop the API. How can I help getting it fixed. I have another monitoring app that does not have the problem but I prefer yours. Thanks in advance
March 07, 2015, 10:04:07 PM
Ok so I have imported the miner into the software and set up in advanced section however. I do not think going to work because their is no option to scan for hard drives as only detects usb asic and port dependent hardware. If their was option to scan or so might work.
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
This only works with forks of CGMiner and BFGMiner that adopt their standard RPC API. It will not work with "any old miner" executable. From what you are describing I doubt this would work.
What is the backend miner specifically?
Edit: thanks btw, I updated the wiki to mention the RPC API requirement.
I know it is not based sgminer from looking at the creator http://burstcoin.eu/download/14-blago%27s-burst-miner so unsure if will work as you said doubtful will work.
March 07, 2015, 02:17:43 PM
Ok so I have imported the miner into the software and set up in advanced section however. I do not think going to work because their is no option to scan for hard drives as only detects usb asic and port dependent hardware. If their was option to scan or so might work.
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
This only works with forks of CGMiner and BFGMiner that adopt their standard RPC API. It will not work with "any old miner" executable. From what you are describing I doubt this would work.
What is the backend miner specifically?
Edit: thanks btw, I updated the wiki to mention the RPC API requirement.
March 07, 2015, 01:56:48 PM
Ok so I have imported the miner into the software and set up in advanced section however. I do not think going to work because their is no option to scan for hard drives as only detects usb asic and port dependent hardware. If their was option to scan or so might work.
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
Also what commands are used to set up to use the miner as it is miner.exe for the program to start in its own window etc. So what command would I put for it to start miner.exe ?
March 07, 2015, 01:43:44 PM
Is their a way to request mining software to be added into this for different types of miners other than the ones you have already added for different algos altogether for example Burstcoin is hdd mining with its own mining software. Is their a way to add this into your client?
You can add any Backend Miners and any GPU Algorithms you like to MultiMiner. Both are described in the help docs. Please let me know if you have any questions on this and I will update the docs to include more info accordingly.
https://github.com/nwoolls/MultiMiner/wiki/Backend-Miners#backend-miners
https://github.com/nwoolls/MultiMiner/wiki/GPU-Algorithms#gpu-algorithms
Ah ok didn't know this. I will try to get this to work as it is going to be difficult I think as it is not a GPU coin CPU or Asic coin it is Hard drive coin that the client generates shares based on proof of capacity. Ill give it a go anyway and see about following the instructions on adding in on guide you posted.
March 07, 2015, 09:12:11 AM
Is their a way to request mining software to be added into this for different types of miners other than the ones you have already added for different algos altogether for example Burstcoin is hdd mining with its own mining software. Is their a way to add this into your client?
You can add any Backend Miners and any GPU Algorithms you like to MultiMiner. Both are described in the help docs. Please let me know if you have any questions on this and I will update the docs to include more info accordingly.
https://github.com/nwoolls/MultiMiner/wiki/Backend-Miners#backend-miners
https://github.com/nwoolls/MultiMiner/wiki/GPU-Algorithms#gpu-algorithms
March 05, 2015, 08:32:15 PM
Hello, newbie here 
I have an ASIC gridseed orb 5 chips dualminer, I'm using cpu miner for Scrypt it's okay but when it comes to BTC I can't mine, I installed Zadig driver, I tried cgminer with this code " cgminer.exe -o stratum+tcp://eu-stratum.btcguild.com:3333 -u yassassin_1 -p 123 --gridseed-options=baud=115200,freq=750,chips=5,modules=1,usefifo=0,btc=64 --hotplug=2 "
But all I see is this, and it doesn't change at all
http://i38.servimg.com/u/f38/19/16/10/10/azqs11.png
I have an ASIC gridseed orb 5 chips dualminer, I'm using cpu miner for Scrypt it's okay but when it comes to BTC I can't mine, I installed Zadig driver, I tried cgminer with this code " cgminer.exe -o stratum+tcp://eu-stratum.btcguild.com:3333 -u yassassin_1 -p 123 --gridseed-options=baud=115200,freq=750,chips=5,modules=1,usefifo=0,btc=64 --hotplug=2 "
But all I see is this, and it doesn't change at all
http://i38.servimg.com/u/f38/19/16/10/10/azqs11.png
March 03, 2015, 07:44:01 PM
Is their a way to request mining software to be added into this for different types of miners other than the ones you have already added for different algos altogether for example Burstcoin is hdd mining with its own mining software. Is their a way to add this into your client?
February 28, 2015, 10:52:13 PM
@Nwoolls
I think theres a problem with the connection to the S5 (latest firmware) miners. Just the S5 - I have S3's with no problems. The hash rate will disappear from the interface. The miner will continue hashing. Just on the interface the miner will not be there. Might take a day to disappear. I restart the miner and the miner shows back up in the Multiminer interface. Thanks in advance
Any ideas on this one. Thanks
I think theres a problem with the connection to the S5 (latest firmware) miners. Just the S5 - I have S3's with no problems. The hash rate will disappear from the interface. The miner will continue hashing. Just on the interface the miner will not be there. Might take a day to disappear. I restart the miner and the miner shows back up in the Multiminer interface. Thanks in advance
Any ideas on this one. Thanks
It sounds like your miner stops responding to RPC API commands. To verify, wait until it happens again and then:
- Check the API Monitor for any errors
- Use the API Console to issue a "devs" and "devdetails" command to your S5
If you can confirm this is happening I can try some things like upping the connect & read-timeouts to see if we can work around the odd behavior.
@Nwoolls - Ill start running multi miner again and check the logs. Thanks
February 28, 2015, 10:23:17 PM
Could someone help with this issue every time I try to update multiminer past 3.8.7 I get
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.InvalidOperationException: Sequence contains no matching element
at System.Linq.Enumerable.Single[TSource](IEnumerable`1 source, Func`2 predicate)
at MultiMiner.UX.ViewModels.ApplicationViewModel.DownloadRequiredMiners() in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.UX\ViewModels\ApplicationViewModel.cs:line 2229
at MultiMiner.UX.ViewModels.ApplicationViewModel.StartMiningLocally() in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.UX\ViewModels\ApplicationViewModel.cs:line 2051
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18063 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
MultiMiner.Win
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file[Suspicious link removed]
----------------------------------------
MultiMiner.UX
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.UX.DLL
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18021 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MultiMiner.Engine
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Engine.DLL
----------------------------------------
MultiMiner.Utility
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Utility.DLL
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18036 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
MultiMiner.CoinApi
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.CoinApi.DLL
----------------------------------------
MultiMiner.Xgminer.Api
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Xgminer.Api.DLL
----------------------------------------
MultiMiner.Xgminer
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Xgminer.DLL
----------------------------------------
MultiMiner.MobileMiner
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.MobileMiner.DLL
----------------------------------------
MultiMiner.Discovery
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Discovery.DLL
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18060 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MultiMiner.CoinWarz
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.CoinWarz.DLL
----------------------------------------
MultiMiner.CoinChoose
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.CoinChoose.DLL
----------------------------------------
MultiMiner.WhatMine
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.WhatMine.DLL
----------------------------------------
MultiMiner.WhatToMine
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.WhatToMine.DLL
----------------------------------------
MultiMiner.Remoting
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Remoting.DLL
----------------------------------------
Newtonsoft.Json
Assembly Version: 6.0.0.0
Win32 Version: 6.0.8.18111
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/Newtonsoft.Json.DLL
----------------------------------------
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.Runtime.Serialization
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
System.Xml.Linq
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MultiMiner.MultipoolApi
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.MultipoolApi.DLL
----------------------------------------
MultiMiner.NiceHash
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.NiceHash.DLL
----------------------------------------
MultiMiner.Services
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Services.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MultiMiner.Blockchain
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Blockchain.DLL
----------------------------------------
MultiMiner.ExchangeApi
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.ExchangeApi.DLL
----------------------------------------
Microsoft.CSharp
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.CSharp/v4.0_4.0.0.0__b03f5f7f11d50a3a/Microsoft.CSharp.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Management
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
System.ServiceModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
----------------------------------------
SMDiagnostics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
----------------------------------------
System.ServiceModel.Internals
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll
----------------------------------------
System.IdentityModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.IdentityModel/v4.0_4.0.0.0__b77a5c561934e089/System.IdentityModel.dll
----------------------------------------
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.Dynamic
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Dynamic/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Dynamic.dll
----------------------------------------
Anonymously Hosted DynamicMethods Assembly
Assembly Version: 0.0.0.0
Win32 Version: 4.0.30319.18063 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/mscorlib/v4.0_4.0.0.0__b77a5c561934e089/mscorlib.dll
----------------------------------------
MultiMiner.Stats
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Stats.DLL
----------------------------------------
MultiMiner.Xgminer.Discovery
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Xgminer.Discovery.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Thank You
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.InvalidOperationException: Sequence contains no matching element
at System.Linq.Enumerable.Single[TSource](IEnumerable`1 source, Func`2 predicate)
at MultiMiner.UX.ViewModels.ApplicationViewModel.DownloadRequiredMiners() in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.UX\ViewModels\ApplicationViewModel.cs:line 2229
at MultiMiner.UX.ViewModels.ApplicationViewModel.StartMiningLocally() in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.UX\ViewModels\ApplicationViewModel.cs:line 2051
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18063 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
MultiMiner.Win
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file[Suspicious link removed]
----------------------------------------
MultiMiner.UX
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.UX.DLL
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18021 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MultiMiner.Engine
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Engine.DLL
----------------------------------------
MultiMiner.Utility
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Utility.DLL
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18036 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
MultiMiner.CoinApi
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.CoinApi.DLL
----------------------------------------
MultiMiner.Xgminer.Api
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Xgminer.Api.DLL
----------------------------------------
MultiMiner.Xgminer
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Xgminer.DLL
----------------------------------------
MultiMiner.MobileMiner
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.MobileMiner.DLL
----------------------------------------
MultiMiner.Discovery
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Discovery.DLL
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18060 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MultiMiner.CoinWarz
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.CoinWarz.DLL
----------------------------------------
MultiMiner.CoinChoose
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.CoinChoose.DLL
----------------------------------------
MultiMiner.WhatMine
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.WhatMine.DLL
----------------------------------------
MultiMiner.WhatToMine
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.WhatToMine.DLL
----------------------------------------
MultiMiner.Remoting
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Remoting.DLL
----------------------------------------
Newtonsoft.Json
Assembly Version: 6.0.0.0
Win32 Version: 6.0.8.18111
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/Newtonsoft.Json.DLL
----------------------------------------
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.Runtime.Serialization
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
System.Xml.Linq
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MultiMiner.MultipoolApi
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.MultipoolApi.DLL
----------------------------------------
MultiMiner.NiceHash
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.NiceHash.DLL
----------------------------------------
MultiMiner.Services
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Services.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MultiMiner.Blockchain
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Blockchain.DLL
----------------------------------------
MultiMiner.ExchangeApi
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.ExchangeApi.DLL
----------------------------------------
Microsoft.CSharp
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.CSharp/v4.0_4.0.0.0__b03f5f7f11d50a3a/Microsoft.CSharp.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Management
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
System.ServiceModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
----------------------------------------
SMDiagnostics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
----------------------------------------
System.ServiceModel.Internals
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll
----------------------------------------
System.IdentityModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.IdentityModel/v4.0_4.0.0.0__b77a5c561934e089/System.IdentityModel.dll
----------------------------------------
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.Dynamic
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Dynamic/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Dynamic.dll
----------------------------------------
Anonymously Hosted DynamicMethods Assembly
Assembly Version: 0.0.0.0
Win32 Version: 4.0.30319.18063 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/mscorlib/v4.0_4.0.0.0__b77a5c561934e089/mscorlib.dll
----------------------------------------
MultiMiner.Stats
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Stats.DLL
----------------------------------------
MultiMiner.Xgminer.Discovery
Assembly Version: 4.0.1.357
Win32 Version: 4.0.1.357
CodeBase: file:///C:/Users/Crypto/AppData/Local/MultiMiner/MultiMiner.Xgminer.Discovery.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Thank You
February 28, 2015, 03:08:22 PM
@Nwoolls
I think theres a problem with the connection to the S5 (latest firmware) miners. Just the S5 - I have S3's with no problems. The hash rate will disappear from the interface. The miner will continue hashing. Just on the interface the miner will not be there. Might take a day to disappear. I restart the miner and the miner shows back up in the Multiminer interface. Thanks in advance
Any ideas on this one. Thanks
I think theres a problem with the connection to the S5 (latest firmware) miners. Just the S5 - I have S3's with no problems. The hash rate will disappear from the interface. The miner will continue hashing. Just on the interface the miner will not be there. Might take a day to disappear. I restart the miner and the miner shows back up in the Multiminer interface. Thanks in advance
Any ideas on this one. Thanks
It sounds like your miner stops responding to RPC API commands. To verify, wait until it happens again and then:
- Check the API Monitor for any errors
- Use the API Console to issue a "devs" and "devdetails" command to your S5
If you can confirm this is happening I can try some things like upping the connect & read-timeouts to see if we can work around the odd behavior.
February 28, 2015, 03:05:33 PM
Nwoolls Please add whirlpoolx algorithm Thank's
No problem - let me know if you have any trouble adding the custom GPU algo.
February 27, 2015, 02:54:23 PM
Nwoolls Please add whirlpoolx algorithm Thank's
February 24, 2015, 10:41:22 PM
@Nwoolls
I think theres a problem with the connection to the S5 (latest firmware) miners. Just the S5 - I have S3's with no problems. The hash rate will disappear from the interface. The miner will continue hashing. Just on the interface the miner will not be there. Might take a day to disappear. I restart the miner and the miner shows back up in the Multiminer interface. Thanks in advance
Any ideas on this one. Thanks
I think theres a problem with the connection to the S5 (latest firmware) miners. Just the S5 - I have S3's with no problems. The hash rate will disappear from the interface. The miner will continue hashing. Just on the interface the miner will not be there. Might take a day to disappear. I restart the miner and the miner shows back up in the Multiminer interface. Thanks in advance
Any ideas on this one. Thanks
February 24, 2015, 01:07:52 PM
A note as well it does not find them at all in MM no matter what I try.
Runs fine with the bat file string I posted though in BFGMiner on its own.
Runs fine with the bat file string I posted though in BFGMiner on its own.
For some reason it will find one when you use that string but not more than one unless you specify each COM.
It is strange and might be why I cannot get them to work in MM.
Does BFGMiner report them when you run:
Refer to the following link for how to find log files generated when scanning for local hardware:
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
It is strange and might be why I cannot get them to work in MM.
Hi Everyone,
A quick question.
I have a bat file that runs great for BFGMiner and I want to use it for MM so I can use Avalon Nano's with MM.
Driver for those that want one that works with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Here is the bat file.
Any help is welcome.
A quick question.
I have a bat file that runs great for BFGMiner and I want to use it for MM so I can use Avalon Nano's with MM.
Driver for those that want one that works with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Here is the bat file.
Code:
bfgminer.exe ^
-S ICA:\\.\COM66 -S ICA:\\.\COM67 -S ICA:\\.\COM68 -S ICA:\\.\COM69 -S ICA:\\.\COM70 ^
-o stratum.btcguild.com:3333 -O WorkerName:123 ^
--set-device ICA:baud=115200 ^
--set-device ICA:reopen=timeout ^
--set-device ICA:work_division=1 ^
--set-device ICA:fpga_count=1 ^
--set-device ICA:probe_timeout=100 ^
--set-device ICA:timing=0.22 ^
--api-listen ^
2>log
So far I have not been able to get it to work in MM.-S ICA:\\.\COM66 -S ICA:\\.\COM67 -S ICA:\\.\COM68 -S ICA:\\.\COM69 -S ICA:\\.\COM70 ^
-o stratum.btcguild.com:3333 -O WorkerName:123 ^
--set-device ICA:baud=115200 ^
--set-device ICA:reopen=timeout ^
--set-device ICA:work_division=1 ^
--set-device ICA:fpga_count=1 ^
--set-device ICA:probe_timeout=100 ^
--set-device ICA:timing=0.22 ^
--api-listen ^
2>log
Any help is welcome.
Does BFGMiner report them when you run:
Code:
bfgminer -d? -S all
Refer to the following link for how to find log files generated when scanning for local hardware:
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
Please see the link I posted above for instructions on finding the log files created by MultiMiner when it scans hardware. The devices are not going to work properly in MultiMiner unless BFGMiner lists the devices when run with the commands found in the log files.
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
You can also run your batch file with --api-listen, --api-port and --api-allow and MultiMiner will automatically display that miner's information under the Network group.
Finally you could try editing the KnownDevicesCache.xml file (found in ~./config/MultiMiner on Linux and OS X and %appdata%\MultiMiner on Windows) and adding the devices manually (with MultiMiner closed).
February 23, 2015, 06:50:43 PM
A note as well it does not find them at all in MM no matter what I try.
Runs fine with the bat file string I posted though in BFGMiner on its own.
Runs fine with the bat file string I posted though in BFGMiner on its own.
For some reason it will find one when you use that string but not more than one unless you specify each COM.
It is strange and might be why I cannot get them to work in MM.
Does BFGMiner report them when you run:
Refer to the following link for how to find log files generated when scanning for local hardware:
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
It is strange and might be why I cannot get them to work in MM.
Hi Everyone,
A quick question.
I have a bat file that runs great for BFGMiner and I want to use it for MM so I can use Avalon Nano's with MM.
Driver for those that want one that works with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Here is the bat file.
Any help is welcome.
A quick question.
I have a bat file that runs great for BFGMiner and I want to use it for MM so I can use Avalon Nano's with MM.
Driver for those that want one that works with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Here is the bat file.
Code:
bfgminer.exe ^
-S ICA:\\.\COM66 -S ICA:\\.\COM67 -S ICA:\\.\COM68 -S ICA:\\.\COM69 -S ICA:\\.\COM70 ^
-o stratum.btcguild.com:3333 -O WorkerName:123 ^
--set-device ICA:baud=115200 ^
--set-device ICA:reopen=timeout ^
--set-device ICA:work_division=1 ^
--set-device ICA:fpga_count=1 ^
--set-device ICA:probe_timeout=100 ^
--set-device ICA:timing=0.22 ^
--api-listen ^
2>log
So far I have not been able to get it to work in MM.-S ICA:\\.\COM66 -S ICA:\\.\COM67 -S ICA:\\.\COM68 -S ICA:\\.\COM69 -S ICA:\\.\COM70 ^
-o stratum.btcguild.com:3333 -O WorkerName:123 ^
--set-device ICA:baud=115200 ^
--set-device ICA:reopen=timeout ^
--set-device ICA:work_division=1 ^
--set-device ICA:fpga_count=1 ^
--set-device ICA:probe_timeout=100 ^
--set-device ICA:timing=0.22 ^
--api-listen ^
2>log
Any help is welcome.
Does BFGMiner report them when you run:
Code:
bfgminer -d? -S all
Refer to the following link for how to find log files generated when scanning for local hardware:
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
February 23, 2015, 06:40:39 PM
For some reason it will find one when you use that string but not more than one unless you specify each COM.
It is strange and might be why I cannot get them to work in MM.
Does BFGMiner report them when you run:
Refer to the following link for how to find log files generated when scanning for local hardware:
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
It is strange and might be why I cannot get them to work in MM.
Hi Everyone,
A quick question.
I have a bat file that runs great for BFGMiner and I want to use it for MM so I can use Avalon Nano's with MM.
Driver for those that want one that works with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Here is the bat file.
So far I have not been able to get it to work in MM.
Any help is welcome.
A quick question.
I have a bat file that runs great for BFGMiner and I want to use it for MM so I can use Avalon Nano's with MM.
Driver for those that want one that works with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Here is the bat file.
Code:
bfgminer.exe ^
-S ICA:\\.\COM66 -S ICA:\\.\COM67 -S ICA:\\.\COM68 -S ICA:\\.\COM69 -S ICA:\\.\COM70 ^
-o stratum.btcguild.com:3333 -O WorkerName:123 ^
--set-device ICA:baud=115200 ^
--set-device ICA:reopen=timeout ^
--set-device ICA:work_division=1 ^
--set-device ICA:fpga_count=1 ^
--set-device ICA:probe_timeout=100 ^
--set-device ICA:timing=0.22 ^
--api-listen ^
2>log
Any help is welcome.
Does BFGMiner report them when you run:
Code:
bfgminer -d? -S all
Refer to the following link for how to find log files generated when scanning for local hardware:
https://github.com/nwoolls/MultiMiner/wiki/Local-Devices#windows
Jump to: