Topic: My second ZEC + XMR+ ETH thread builds info links thoughts and photos. - page 24. (Read 147923 times)

Please can you post a link to it, you've gotten me curious!

Merry Christmas and Happy New Year holidays to everyone!

Thanks to Phil for creating this thread too and always learning from all of you guys -- appreciate it very much.

My Christmas presents awaits.....

1. 700THs++ = 120 x Avalon 7s going online phase by phase today ... looking forward to get pass 2PH/s for the group.
2. Just ordered the 5 x EVGA Z170 mobos, cpu, ram, m2 etc. from Newegg.
3. Negotiating 20 x Sapphire 470s from a local supplier ... hopefully can close by today.
4. And most of all .... all the kids are around this Christmas so going for nice lunch with the family today!

I picked up a rx 480 4gb from newegg for $175 wooo

hoping for an after x-mas sale as well 

Merry Christmas and Happy New Year!

My gift to myself is 14TH of S9 on Hashnest

Merry Christmas to all!

Or happy holidays to all!

My Christmas presents to me from me

1 biostar z170 mobo
2 sticks of crucial ram
3 more psus
4 Msi rx 470s
5 more fans
6 Dvi to Dvi cables
7 USB cables
8 port dvi/USB/kvm switch
9 cat 7 cables
10 pounds of steaks
11 sized sneakers
12 canolies

All seriousness I did get an 8 port  switch. Cost me good money but I have an idea for using it beyond mining.
And I am going to have six four card biostar Msi rigs.

Merry Christmas everyone. Just wanted to take a moment to thank all of you on this thread who have been very kind, patient and helpful educating a mining newbie like me over the past 2 months. I am still not where I want to be but have learned a lot and hope to continue that and leverage it into a profitable 2017.

Here's a quick update on my never-ending battle to get 6 GPU's running on my 2nd rig... yesterday, I took another shot at strap-modding the bios of my MSI 470s.  My first attempt about a week ago to mod GPU #0 didn't work for some reason and I had to flash it back to original settings.  This time, I unplugged my orphan Nitro, rebooted, and flashed dev #1 with the modded bios.  Reboot went fine but upon checking DevMgr, found the dreaded error 43 on presumably the card i flashed. Tried running the 6xGPU mod a few times but no dice, so I re-flashed it with original bios, rebooted, plugged the Nitro back in I'm back to "normal".

What i don't get is why the exact strap-mod I used on the exact same GPUs on my other rig (same W7) doesnt wanna work on this rig... 0 for 2 now. I'm sure I am doing it right but this rig doesn't wanna take it.  The only real difference is the Mobo between the 2 systems.  Anyway, I'm at the point where it probably makes sense to strip this thing down, run the driver cleaner, then re-install the GPUs one by one, maybe flashing each as I go.

But, then I got to thinking... if I'm going to basically re-build this thing, I might as well install Windows 10, since I have heard from numerous people that this is a better OS for anything over 4 GPUs.  And, it looks like I can still get an upgrade for free so probably worth the shot.  This time I am going to try plugging the 1st GPU (and monitor) into slot #2 (x16) since starting with slot #1 last time may have been causing some of my issues. Hopefully, W10 will let me get 6 GPUs running and modded. That should get me about 40% more hash-rate on XMR vs what that rig is currently doing.

Ah - nanos!

Actually Furys are way more cheaper than nanos - $250 vs $470 (new on amazon)

Great statistics data - appreciate it!

No Furies - just the R9-Nanos 4GB HMB memory. R9-Fury is the one with liquid cooling no? Too expensive that card. Nanos were equally expensive.

Personally for me in my farm, Nanos are amazing for ZEC, topping 320-330 H/s per GPU, also not bad of a performer in ETH. Easily rom modded for undervolt and OC too.

The 480s are very good in ETH mining, esp with modded roms, 29-31MH/s per GPU, -100mV or more, and - undervolt.

Meanwhile, the 390s are also fantastic mining all 3 fav coins - ZEC, ETH and XMR but its power hungry, huge, long and old card.

Best card for ZEC in my farm: 390, Nanos and 480s (in that order)

XMR: 390s and Nanos (they have many compute units so good for ZEC and XMR)... but 480s low performer, not stable for XMR - Claymore needs to work on it.

ETH: 480s. 390s and Nanos (in that order). All 3 card types full cylinder will deliver about 3.8GHs for ETH.

Future: 480s or RX series, should be card of choice - lower power consumption, good cooling and Claymore optimised to the last juice, for ETH and ZEC.

citronick:

I think you have a r9 fury cards in your rigs. How are they comparable to RX 480 in ETH and ZEC?

Maybe thermaltake?

Go to www.jonnyguru.com. He has info on over 300 psus

Thanks for the reply

I would say yes. I ran two cards on a 550w without problems

While we're talking about PSU's: does anyone have a way to pull data from their PSU's?
I know Corsair Link is one PSU that can do that .. Do any others? I'm trying to find a way to monitor lots of power going to individual rigs on a large scale.

Is this PSU enough for 2x Rx480?

http://www.zalman.com/contents/products/view.html?no=89

Yeah, I really like that Rosewill too... also have the 1000W version running my 4-card rig. I really wish I would have bought 2 when they were at $120, since now the best price is $160.  That and the apparent rise in RAM prices are what is currently holding me back from completing my 3rd build.

Rosewill Quark Series 1200 Watt Full Modular 80 Plus Platinum Certified

Here is the link:  https://www.amazon.com/gp/product/B00VS8728G/ref=ox_sc_sfl_title_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

They have been really reliable for me.

Oh I got the EVGA  to work  with the M2 slot  so I kind of like the board.  Of course sale is over.


We found the plat rosewill quark as low as 119 for 1200 watts


https://www.amazon.com/Rosewill-Quark-1200-Platinum-Certified/dp/B00VS8728G/ref=sr_1_2?


mine is running an antminer r4

that sale is gone

That can be a great deal!

The cheapest 1200W platinum I've seen was ~$185, but usually they are ~$200

Phil, That is a very good technique.  I may want to reduce back to 6 gpu systems.  The 1600W psu's are very pricey.  I can get the 1200W Platinum psu's for about $150+/-20 on Amazon.

thats why I do 4 card builds