Anyone else using Coinotron see a discrepancy with hash rate? With the latest miner from djm34, I get ~630khz on my gtx 980. However, Coinotron consistently shows 270-300khz. Usually you only see this big of a difference with very low hash rates. I was just curiousif this is a known issue, and/or what the solution is. Thanks!
may-be you can try to use --diff 0.5 not sure it will really help, it can be that you are requesting share at a certain level of difficulty and miss all the share at lower difficulty. 
Topic: neoscrypt algo for ccminer and nvidia card: call for donation - page 3. (Read 33785 times)
Anyone else using Coinotron see a discrepancy with hash rate? With the latest miner from djm34, I get ~630khz on my gtx 980. However, Coinotron consistently shows 270-300khz. Usually you only see this big of a difference with very low hash rates. I was just curiousif this is a known issue, and/or what the solution is. Thanks!
February 28, 2015, 12:17:33 PM
February 26, 2015, 12:06:22 AM
Just wanted to say I have the miner up and running on my gtx 980. Very good work, djm34! Keep it up, it's exciting to see developers making strides like this!
February 25, 2015, 01:31:14 PM
Hey all, is the crowdfunding for this still in progress? I'd be more than happy to contribute to promising development like this if I can get my hands on such a smart miner 
it has been a little slow but yes. You'll get the miner if you give a small donation (0.02btc minimum)
Great! I just sent my donation. Couldn't find where to see transaction ID on Bittrex though, so I took a screenshot :/
EDIT: Found the TxId!
9ae52cffc2fb476a9be03bdfa76049d6f7443cfc69a69557bb1b21c771b52fec February 25, 2015, 07:59:48 AM
Hey all, is the crowdfunding for this still in progress? I'd be more than happy to contribute to promising development like this if I can get my hands on such a smart miner
it has been a little slow but yes. You'll get the miner if you give a small donation (0.02btc minimum)
February 24, 2015, 10:50:44 PM
Hey all, is the crowdfunding for this still in progress? I'd be more than happy to contribute to promising development like this if I can get my hands on such a smart miner
February 16, 2015, 04:10:50 PM
[/quote]
Hi, you need to mine directly at "The Block Factory", they have neoscrypt coins IPC, FTC, GUN, PXI. Currently, FTC is paying the most compared to Nicehash (2.89BTC per GHs at current average difficulty of 8.5).
You get 100% acceptance rate, unfortunately, there are few problems with Nicehash; it has a poor acceptance rate.
Bat file:
ccminer.exe -a neoscrypt -o stratum+tcp://fr.ftc.theblocksfactory.com:3333 -u djm34.1_diff128 -p password -d 0,1 --throughput 3.5
[/quote]
@thevictimofuktyranny thanks
February 16, 2015, 03:29:17 PM
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.
[/quote]
you need to use "--diff 0.5" (was already mentioned on the thread) (or alternatively blockfactory without difficulty adjustment)
[/quote]
That gave me 0% but hash showed good on the command window. Reading back in the thread to see the --diff 0.5.
ccminer.exe -a neoscrypt --throughput 3 -o stratum+tcp://stratum.nicehash.com:3341
EDIT: Ok for my 750ti no oc working 100% ccminer.exe -a neoscrypt --throughput 3 --diff 0.5 -o stratum+tcp://stratum.nicehash.com:3341
That did it djm ...thanks
[/quote]
you need to use "--diff 0.5" (was already mentioned on the thread) (or alternatively blockfactory without difficulty adjustment)
[/quote]
That gave me 0% but hash showed good on the command window. Reading back in the thread to see the --diff 0.5.
ccminer.exe -a neoscrypt --throughput 3 -o stratum+tcp://stratum.nicehash.com:3341
EDIT: Ok for my 750ti no oc working 100% ccminer.exe -a neoscrypt --throughput 3 --diff 0.5 -o stratum+tcp://stratum.nicehash.com:3341
That did it djm ...thanks
February 16, 2015, 02:48:31 PM
Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti no over clocking.
I'll try on my rig later.
If it isn't enough try also to add --throughput 3
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.
EDIT: --throughput 3 seems to work ... got 147kh/s ...now reinstalling the drivers.
(sorry...) you beat us all regarding computer problems Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.
my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... 
Have to call HP support and microsoft .. Maybe my cards are ok.. 
EDIT: Yes thx the hdmi cable seems fine. And doing sfc /scannow command ... may help.
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.
February 16, 2015, 02:44:59 PM
Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti no over clocking.
I'll try on my rig later.
If it isn't enough try also to add --throughput 3
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.
EDIT: --throughput 3 seems to work ... got 147kh/s ...now reinstalling the drivers.
(sorry...) you beat us all regarding computer problems Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.
my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok.. EDIT: Yes thx the hdmi cable seems fine. And doing sfc /scannow command ... may help.
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.
Hi, you need to mine directly at "The Block Factory", they have neoscrypt coins IPC, FTC, GUN, PXI. Currently, FTC is paying the most compared to Nicehash (2.89BTC per GHs at current average difficulty of 8.5).
You get 100% acceptance rate, unfortunately, there are few problems with Nicehash; it has a poor acceptance rate.
Bat file:
ccminer.exe -a neoscrypt -o stratum+tcp://fr.ftc.theblocksfactory.com:3333 -u djm34.1_diff128 -p password -d 0,1 --throughput 3.5
February 16, 2015, 02:23:00 PM
Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti no over clocking.
I'll try on my rig later.
If it isn't enough try also to add --throughput 3
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.
EDIT: --throughput 3 seems to work ... got 147kh/s ...now reinstalling the drivers.
(sorry...) you beat us all regarding computer problems Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.
my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok.. EDIT: Yes thx the hdmi cable seems fine. And doing sfc /scannow command ... may help.
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.
February 16, 2015, 12:22:40 PM
Trying to add support for legacy cards is going to be a waste of time,
It is, without any 'if' ...also 600/700 serie cards can't really be considered as legacy either...
February 16, 2015, 11:06:09 AM
Trying to add support for legacy cards is going to be a waste of time,
It is, without any 'if' ... February 16, 2015, 10:27:48 AM
djm34
Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?
Thanks
not for the moment, the next stage to get some significant increases will require a complete rewrite of some of the algo...Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?
Thanks
The problem at the moment is more to get it to work with compute 3.0... (even though, the speed won't be great...)
I would imagine, though I cannot be say with any confidence
Trying to add support for legacy cards is going to be a waste of time, if you are going to need to re-write the algo to improve performance
February 16, 2015, 06:03:15 AM
djm34
Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?
Thanks
not for the moment, the next stage to get some significant increases will require a complete rewrite of some of the algo...Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?
Thanks
The problem at the moment is more to get it to work with compute 3.0... (even though, the speed won't be great...)
February 15, 2015, 09:30:45 PM
djm34
Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?
Thanks
Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?
Thanks
February 15, 2015, 06:26:04 AM
this algorithm not favorable especially so also the paid was made by a mayner, here what sense to pay if it is easier to take not new 290kh and to rejoice?
it was favorable when the bitok cost 700-1000 dollars and now sense from mayner to exhaust the last money?
your message doesn't make any sense at all....and I am not a mayner (whatever it is is) and if you can't exhaust 0.02 bitok in my direction, well you won't the algo... and seriously like if 0.02bitok was like exhausting the last money... it was favorable when the bitok cost 700-1000 dollars and now sense from mayner to exhaust the last money?
to take not new 290kh and to rejoice
February 15, 2015, 05:05:02 AM
this algorithm not favorable especially so also the paid was made by a mayner, here what sense to pay if it is easier to take not new 290kh and to rejoice?
it was favorable when the bitok cost 700-1000 dollars and now sense from mayner to exhaust the last money?
it was favorable when the bitok cost 700-1000 dollars and now sense from mayner to exhaust the last money?
February 10, 2015, 10:42:52 PM
Date: 2/10/2015 22:41
To: 18UZRrybgjmR4M53Aca4Q8YBguqErZ5qaP
Debit: -0.02 BTC
Transaction fee: -0.0002 BTC
Net amount: -0.0202 BTC
Transaction ID: e35e9d3fe347cdf9130905a4cdb206d70c1f62dfbf84018e230e296671c6cf61
sent in donation
To: 18UZRrybgjmR4M53Aca4Q8YBguqErZ5qaP
Debit: -0.02 BTC
Transaction fee: -0.0002 BTC
Net amount: -0.0202 BTC
Transaction ID: e35e9d3fe347cdf9130905a4cdb206d70c1f62dfbf84018e230e296671c6cf61
sent in donation
Jump to: