NEW BAIKAL MINER BK-G28 released. - page 3.

flexmeister

newbie

Activity: 21

Merit: 0

Hey mate, I've noticed it only works if you only have a single pool configured

here's a new process that will allow the miner to auto start

cd /opt/scripta/bin/
sudo wget http://pool.totallyawesome.party/sgminermbc.tar.gz
sudo killall sgminer
sudo cp -n sgminer sgminer_BAK
sudo mv sgminer sgminer_ORG
sudo tar -xzvf sgminermbc.tar.gz
echo

Mining will automatically start in a few seconds. Just remember to check that you only have one pool configured

To revert back
sudo killall sgminer
sudo cp sgminer_BAK sgminer

Quote from: sukitars on January 17, 2019, 03:30:44 PM

Quote from: tblock3 on January 06, 2019, 10:44:04 AM

Quote from: flexmeister on December 27, 2018, 12:02:03 AM

Log into B28.
sudo wget http://pool.totallyawesome.party/mbc.tar.gz
sudo tar -xzvf mbc.tar.gz
sudo ./mbc /dev/null &

Thank you for the update.

It is not working for me. ( sgminer 5.6.6-l) I can set "stratum+tcp://pool.totallyawesome.party:5333" as pool, algo groestl, user = wallet, pw = "c=MBC". Of course this leads to 100% rejected shares on a stock miner.

but running "sudo ./mbc /dev/null &" makes no difference for me. task is restarting ( you are kicked out of screen ) and you can reconnect after 5 seconds. but still only rejected shares.

Same here. I get all rejects. I changed the difficult to 40*28Gh, but no accepted blocks. Any feedback I appreciate.
Thanks!

sukitars

newbie

Activity: 8

Merit: 0

Quote from: tblock3 on January 06, 2019, 10:44:04 AM

Quote from: flexmeister on December 27, 2018, 12:02:03 AM

Log into B28.
sudo wget http://pool.totallyawesome.party/mbc.tar.gz
sudo tar -xzvf mbc.tar.gz
sudo ./mbc /dev/null &

Thank you for the update.

It is not working for me. ( sgminer 5.6.6-l) I can set "stratum+tcp://pool.totallyawesome.party:5333" as pool, algo groestl, user = wallet, pw = "c=MBC". Of course this leads to 100% rejected shares on a stock miner.

but running "sudo ./mbc /dev/null &" makes no difference for me. task is restarting ( you are kicked out of screen ) and you can reconnect after 5 seconds. but still only rejected shares.

Same here. I get all rejects. I changed the difficult to 40*28Gh, but no accepted blocks. Any feedback I appreciate.
Thanks!

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: crypto_han on December 30, 2018, 11:19:29 PM

I lost all network connection to the miner by trying to set static IP's through SSH Cool

Anyone know how I can directly plug into the unit and boot up Linux?

Also, anyone have an updated firmware for the BK-28? Would be very much appreciated

maybe you did a little bit of pain when configuring your connection, as well as you pay more attention and try again and slightly change so that all connection problems can be connected properly

MinerClaudiu

newbie

Activity: 12

Merit: 5

Quote from: crypto_han on December 30, 2018, 11:19:29 PM

I lost all network connection to the miner by trying to set static IP's through SSH Cool

Anyone know how I can directly plug into the unit and boot up Linux?

Also, anyone have an updated firmware for the BK-28? Would be very much appreciated

Hi,
I've also get this issue, but after a power_off-1min wait-power_on, it started with new IP.
I've used this tutorial, hope it helps: http://www.bilder.lallax.de/staticIP.pdf

bittawm

legendary

Activity: 1894

Merit: 1087

selling these for 1000usd each including shipping

tblock3

newbie

Activity: 3

Merit: 0

Quote from: flexmeister on December 27, 2018, 12:02:03 AM

Log into B28.
sudo wget http://pool.totallyawesome.party/mbc.tar.gz
sudo tar -xzvf mbc.tar.gz
sudo ./mbc /dev/null &

Thank you for the update.

It is not working for me. ( sgminer 5.6.6-l) I can set "stratum+tcp://pool.totallyawesome.party:5333" as pool, algo groestl, user = wallet, pw = "c=MBC". Of course this leads to 100% rejected shares on a stock miner.

but running "sudo ./mbc /dev/null &" makes no difference for me. task is restarting ( you are kicked out of screen ) and you can reconnect after 5 seconds. but still only rejected shares.

Iomgui

newbie

Activity: 30

Merit: 0

Quote from: Meteorite777 on January 02, 2019, 06:52:52 PM

Quote from: Tarlatata on November 22, 2018, 07:48:26 AM

Quote from: astraleureka on November 16, 2018, 02:56:21 PM

Vosk, what are the symptoms of the crash - does the miner lock up entirely, or does it just stop hashing (either on one board or all) ?

Quote from: VoskCoin on November 16, 2018, 11:06:50 AM

anyone have their g28 crash on groestl?

I have 15 G-28 and they randomly crash all the time. I cannot spend a day without having to manually unpower and power back at LEAST 6 unit as they do not cycle themselve upon a crash.

http://prntscr.com/llk8fi
http://prntscr.com/llk8ru
http://prntscr.com/llk90p

Baikal skype support has no idea what's up.

Oh, as some other said, got multiple board that were not in the right slot and bent. 1 unit wouldn't power up at all because one of the board was missing a capacitance and now only run with 6 instead of 7 board.

Seriously, never again will I purchase from Baikal unless they do something about this.

Has anyone found a fix for this? Two of my three G-28's crash atleast everyday while one of them seem to be able to go for a week or so. I am forced to power cycle them to get them to hash again, but about 50% of the time of when power cycling them they fail to boot up correctly and will not hash. This forces me to power cycle each machine sometimes multiple times in a row.

My solution to this was to put them on a switched PDU and/or smart outlets on a schedule to cycle every few hours; however half of the scheduled resets result in a non-hashing machine until the next scheduled reset (which is every 2-4 hours currently, I will have to adjust for more frequent resets however it seems they will still only correctly cycle about half the time.)

At this rate; since about 50% of my power cycles result in a non-functioning machine, the BK-G28's are effectively only hashing 50% of the time. This is catastrophic.

Anyone else with similar experiences?

First, you want to make sur that each board are well pluged to the uniting board, and then that the uniting board is well plugged with the orange Pi. It is the main cause of instability. Make sur to do this with G28 unplugged (not powered).

From my experience, when the previous was guaranteed ok, i had similar problems but with only with giant+ and baikal X, and it appears the first cause was the ethernert cable (replaced with better quality), or sd card neeeding reinstall (reformat or use a new sd card), or the orange pi needed to be swapped for a brand new one.

Meteorite777

jr. member

Activity: 68

Merit: 6

Quote from: Tarlatata on November 22, 2018, 07:48:26 AM

Quote from: astraleureka on November 16, 2018, 02:56:21 PM

Vosk, what are the symptoms of the crash - does the miner lock up entirely, or does it just stop hashing (either on one board or all) ?

Quote from: VoskCoin on November 16, 2018, 11:06:50 AM

anyone have their g28 crash on groestl?

I have 15 G-28 and they randomly crash all the time. I cannot spend a day without having to manually unpower and power back at LEAST 6 unit as they do not cycle themselve upon a crash.

http://prntscr.com/llk8fi
http://prntscr.com/llk8ru
http://prntscr.com/llk90p

Baikal skype support has no idea what's up.

Oh, as some other said, got multiple board that were not in the right slot and bent. 1 unit wouldn't power up at all because one of the board was missing a capacitance and now only run with 6 instead of 7 board.

Seriously, never again will I purchase from Baikal unless they do something about this.

Has anyone found a fix for this? Two of my three G-28's crash atleast everyday while one of them seem to be able to go for a week or so. I am forced to power cycle them to get them to hash again, but about 50% of the time of when power cycling them they fail to boot up correctly and will not hash. This forces me to power cycle each machine sometimes multiple times in a row.

My solution to this was to put them on a switched PDU and/or smart outlets on a schedule to cycle every few hours; however half of the scheduled resets result in a non-hashing machine until the next scheduled reset (which is every 2-4 hours currently, I will have to adjust for more frequent resets however it seems they will still only correctly cycle about half the time.)

At this rate; since about 50% of my power cycles result in a non-functioning machine, the BK-G28's are effectively only hashing 50% of the time. This is catastrophic.

Anyone else with similar experiences?

flexmeister

newbie

Activity: 21

Merit: 0

Think you'll need to reflash the SD card with the original G28 image

Quote from: crypto_han on December 30, 2018, 11:19:29 PM

I lost all network connection to the miner by trying to set static IP's through SSH Cool

Anyone know how I can directly plug into the unit and boot up Linux?

Also, anyone have an updated firmware for the BK-28? Would be very much appreciated

crypto_han

newbie

Activity: 5

Merit: 0

I lost all network connection to the miner by trying to set static IP's through SSH Cool

Anyone know how I can directly plug into the unit and boot up Linux?

Also, anyone have an updated firmware for the BK-28? Would be very much appreciated

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: whitefire990 on December 27, 2018, 10:36:18 PM

Microbitcoin uses diamond-groestl, not groestl. The merkle root calculation is different than groestl. Therefore, the sgminer firmware needs to be changed to mine it, even if the hash function is the same as groestl.

Hi whitefire.
can you approve the provided modification?

astraleureka

member

Activity: 236

Merit: 16

That's just normal for these units, many people report the same. A fix is not yet known.

Iomgui

newbie

Activity: 30

Merit: 0

Hi,

I still have the same issue. Some are on one switch shared with Baikal-X (those ones, the Baikal X, runs at 99,9% Dacc).
Some others are on another switch and are the only one sharing that switch.

In both case they still are at around 90% Dacc.

What would you suggest that i test ? (and thanks a lot for your help !)

Quote from: flexmeister on December 24, 2018, 05:36:37 AM

Did you get your issue sorted out? I find having them on one switch was causing issues

Quote from: Iomgui on November 22, 2018, 09:18:31 AM

Those 10% are confirmed by miner stats : Dacc is around 89 90% but difficulty rejecty is only 0.1 or 0.2% ... where goes those 10 % ... neither the pool support nor baikal had an anwser ...

whitefire990

copper member

Activity: 166

Merit: 84

Microbitcoin uses diamond-groestl, not groestl. The merkle root calculation is different than groestl. Therefore, the sgminer firmware needs to be changed to mine it, even if the hash function is the same as groestl.

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: flexmeister on December 27, 2018, 12:02:03 AM

Greetings,

After about a month of trial and error every day have finally managed to get the BK28 to mine MBC....

Handle with caution. I can not recognize any need to flash a mod to mine groestl (MBC). I also do not see some kind of legit mod inside the archive.

flexmeister

newbie

Activity: 21

Merit: 0

Greetings,

After about a month of trial and error every day have finally managed to get the BK28 to mine MBC.

To get it working set up your config for a MBC wallet and password c=MBC and algorithm groestl on pool url "stratum+tcp://pool.totallyawesome.party:5333"

Currently profitability is around $15. The only catch is you have to use the included mining pool which has a 20% fee for all the hard work that went into this. So profits will be $12 compared to the $3 currently for Groestl.

Instructions:

Log into B28.
sudo wget http://pool.totallyawesome.party/mbc.tar.gz
sudo tar -xzvf mbc.tar.gz
sudo ./mbc /dev/null &

This will close any currently running sgminer instances and re-launch a new instance that will be able to mine MBC.

Open up the normal miner dashboard and it will show that it is hashing Groestl on the mentioned pool. Verify stats at pool.totallyawesome.party

Have fun!

bittawm

legendary

Activity: 1894

Merit: 1087

Quote from: Baikalek on December 25, 2018, 02:59:13 AM

Quote from: bittawm on December 25, 2018, 02:43:50 AM

I have 5 in stock cheaper than manufacturer

1100usd each including shipping and shipped RIGHT AWAY!

Please and shipping from?

shipping from NZ

I can ship right away

Baikalek

newbie

Activity: 39

Merit: 0

Quote from: bittawm on December 25, 2018, 02:43:50 AM

I have 5 in stock cheaper than manufacturer

1100usd each including shipping and shipped RIGHT AWAY!

Please and shipping from?

bittawm

legendary

Activity: 1894

Merit: 1087

I have 5 in stock cheaper than manufacturer

1100usd each including shipping and shipped RIGHT AWAY!

flexmeister

newbie

Activity: 21

Merit: 0

Anyone that has quite a few G28s, PM me for an opportunity to make much more profit per miner

Topic: NEW BAIKAL MINER BK-G28 released. - page 3. (Read 30074 times)