Those 10% are confirmed by miner stats : Dacc is around 89 90% but difficulty rejecty is only 0.1 or 0.2% ... where goes those 10 % ... neither the pool support nor baikal had an anwser ...
Topic: NEW BAIKAL MINER BK-G28 released. - page 4. (Read 30074 times)
Did you get your issue sorted out? I find having them on one switch was causing issues
selling these for cheaper than the manufacturer with immediate shipping
and how much is that?
Hi. Anyone know where to find the firmware image for these?
selling these for cheaper than the manufacturer with immediate shipping
hi guys can you help me to find newst frimware for baikal g28?
i cant find it in baikal's site
i cant find it in baikal's site
Probably just like any other box chassis miner, the board is receiving reduced airflow compared to the others. This can happen on the outside boards or possibly on the inside boards, depending on whether it's airflow (outside) or if proximity to other boards (inside)
I flipped them upright (standing on the side, controlboard on top), moved the PSUs one level higher instead of besides them and... 7-12 ° C lower temps
Probably just like any other box chassis miner, the board is receiving reduced airflow compared to the others. This can happen on the outside boards or possibly on the inside boards, depending on whether it's airflow (outside) or if proximity to other boards (inside)
Did anyone also notice, that 1-2 hashboards in each G28 tend to get several (5-6) degrees C hotter than the others? Any known reason for that?
Guys, about DGB next algorithm to be Asic resistant (deployment wasannounced in january if i m right, after they said they tested it in november), do we know if they are targeting all Baikal DGB Algos ?
Also do we know if other coins like XVG have said anything about going the same way as DGB ?
Sorry to ask here but cant find any reliable information
Also do we know if other coins like XVG have said anything about going the same way as DGB ?
Sorry to ask here but cant find any reliable information
The Odocrypt algo will be swapped out for one other algo only.
This is currently being tested and bear market or not, will be rolled out when its ready.
Guys, about DGB next algorithm to be Asic resistant (deployment wasannounced in january if i m right, after they said they tested it in november), do we know if they are targeting all Baikal DGB Algos ?
Also do we know if other coins like XVG have said anything about going the same way as DGB ?
Sorry to ask here but cant find any reliable information
Also do we know if other coins like XVG have said anything about going the same way as DGB ?
Sorry to ask here but cant find any reliable information
i don't think DGB will doing that for now since it's a bearish market.
Guys, about DGB next algorithm to be Asic resistant (deployment wasannounced in january if i m right, after they said they tested it in november), do we know if they are targeting all Baikal DGB Algos ?
Also do we know if other coins like XVG have said anything about going the same way as DGB ?
Sorry to ask here but cant find any reliable information
Also do we know if other coins like XVG have said anything about going the same way as DGB ?
Sorry to ask here but cant find any reliable information
If you can not access your Baikals, which happened once for me in several months with several units, you should reflash the SD card. That was the only thing that fixed that problem for me on a BKX once.
Any managed PDU will work, check APC, Tripplite, Cyberpower, Raritan for options. There are interfaces to toggle power via HTTP API or SNMP.
I also have the same issue of multiple crash per day on my Giant X (where you cant even access ip and have to physically restart). Ended up buying a PDU that daily power cycles them.
Hi Kayden - can you send me details/brand/model of this PDU. Thanks
One of my miner can not access to web page somehow, but I see from pool is hashing actually... they told me to change orange pi, but I don't dare to do since its still mining...
I confirm the issue about assembly on 16 total G28 :
- multiple boards are bent, happily with no consequence for me
- needed to unmount and correctly mount fans because of their power cable being hit
- due to transport, needed to replug the card linking the 7 boards, but on very few units, no damaged pins, using DHL. On the baikal X with FEDEX it was just horrible, bent pin on unmounted board ...
On skein or myr gr i dont have the crashing issue.
But on both on suprnova, zpool, miningpoolhub, for either DGB or XVG : i m missing 10% of rewards because i m missing 10% of hasrate compared to nominal 14 / 28. Whereas with BAIKAL X10 i m at 100% reward compared to nominal hashrate.
Those 10% are confirmed by miner stats : Dacc is around 89 90% but difficulty rejecty is only 0.1 or 0.2% ... where goes those 10 % ... neither the pool support nor baikal had an anwser ...
- multiple boards are bent, happily with no consequence for me
- needed to unmount and correctly mount fans because of their power cable being hit
- due to transport, needed to replug the card linking the 7 boards, but on very few units, no damaged pins, using DHL. On the baikal X with FEDEX it was just horrible, bent pin on unmounted board ...
On skein or myr gr i dont have the crashing issue.
But on both on suprnova, zpool, miningpoolhub, for either DGB or XVG : i m missing 10% of rewards because i m missing 10% of hasrate compared to nominal 14 / 28. Whereas with BAIKAL X10 i m at 100% reward compared to nominal hashrate.
Those 10% are confirmed by miner stats : Dacc is around 89 90% but difficulty rejecty is only 0.1 or 0.2% ... where goes those 10 % ... neither the pool support nor baikal had an anwser ...
I also have the same issue of multiple crash per day on my Giant X (where you cant even access ip and have to physically restart). Ended up buying a PDU that daily power cycles them.
Vosk, what are the symptoms of the crash - does the miner lock up entirely, or does it just stop hashing (either on one board or all) ?
anyone have their g28 crash on groestl?
I have 15 G-28 and they randomly crash all the time. I cannot spend a day without having to manually unpower and power back at LEAST 6 unit as they do not cycle themselve upon a crash.
http://prntscr.com/llk8fi
http://prntscr.com/llk8ru
http://prntscr.com/llk90p
Baikal skype support has no idea what's up.
Oh, as some other said, got multiple board that were not in the right slot and bent. 1 unit wouldn't power up at all because one of the board was missing a capacitance and now only run with 6 instead of 7 board.
Seriously, never again will I purchase from Baikal unless they do something about this.
I really think 14GH is the capacity of G28 skein.
But there s Something wrong the "dacc" is around 80 to 90% on the G28 with difficulty managed by suprnova. This is too low, in comparison the X10 on same pool is around 99% explaining X10 is at nominal hashrate.
I tried to force difficulty on suprnova skein for the G28, but with no luck so far the best i achived is an average 12,8 GH/s which is still far from 14GH.
My guess is it is pool related. Though i contacted them twice by their support form and on twitter and NO answer since 48H.
But there s Something wrong the "dacc" is around 80 to 90% on the G28 with difficulty managed by suprnova. This is too low, in comparison the X10 on same pool is around 99% explaining X10 is at nominal hashrate.
I tried to force difficulty on suprnova skein for the G28, but with no luck so far the best i achived is an average 12,8 GH/s which is still far from 14GH.
My guess is it is pool related. Though i contacted them twice by their support form and on twitter and NO answer since 48H.
I have a similar experience, pools are reporting 10-20% less hashrate than advertised. Skein bounced between 11-14 Gh with an average around 12.5-13 I'd say. Myr-Gr was similar and averaged around 25-26 Gh.
You would need to load the firmware onto the card in full, it is larger than 60 MB but Windows won't show the partitions on the card. Baikal has instructions for upgrading the firmware on their site which you can reference.
Jump to: