NEW BAIKAL MINER BK-G28 released. - page 6.

astraleureka

member

Activity: 236

Merit: 16

Quote from: elmond on November 08, 2018, 11:15:32 PM

Quote from: Andartis on November 07, 2018, 08:09:10 PM

Be careful though on the power intensive algos. You will draw more current from one connector. If you use your PSU cable without splitter, that should be fine on low power algos. But if you e.g. mine X11 and, even worse, connect one splitter from a 6pin PSU cable to two boards, this wont be a good idea.

And just remember again: Ratinds: 8pin connector 150w, 6pin connector 75w.
[edit]

the 75/100 watt concept only used for gpu because it's utilize the sense pin, i don't think miner use that.

It has nothing to do with being for GPU, the two extra pins are ground.

elmond

newbie

Activity: 49

Merit: 0

Quote from: percy_tc on November 08, 2018, 05:08:39 AM

you have to attach all 14 cables, if you want to prevent burned circuit for x11 algo. each of them is certified for 75W, do the math.

funny 2 x 75W = 150W, 7 x 150W = 1050W, how do you think even X11 algo is safe.

elmond

newbie

Activity: 49

Merit: 0

Quote from: Andartis on November 07, 2018, 08:09:10 PM

Be careful though on the power intensive algos. You will draw more current from one connector. If you use your PSU cable without splitter, that should be fine on low power algos. But if you e.g. mine X11 and, even worse, connect one splitter from a 6pin PSU cable to two boards, this wont be a good idea.

And just remember again: Ratinds: 8pin connector 150w, 6pin connector 75w.
[edit]

the 75/100 watt concept only used for gpu because it's utilize the sense pin, i don't think miner use that.

astraleureka

member

Activity: 236

Merit: 16

You wanna dump the firmware for me? =)

bittawm

legendary

Activity: 1894

Merit: 1087

Let me know if anyone wants these miners.

I am selling some to those who do not want to order direct

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: percy_tc on November 08, 2018, 05:08:39 AM

you have to attach all 14 cables, if you want to prevent burned circuit for x11 algo. each of them is certified for 75W, do the math.

Yeah, thats what i mean. I edited my sentence, since it could be misunderstood.

percy_tc

full member

Activity: 583

Merit: 106

you have to attach all 14 cables, if you want to prevent burned circuit for x11 algo. each of them is certified for 75W, do the math.

Andartis

jr. member

Activity: 306

Merit: 7

Be careful though on the power intensive algos. You will draw more current from one connector. If you use your PSU cable without splitter, that should be fine on low power algos. But if you e.g. mine X11 and, even worse, connect one splitter from a 6pin PSU cable to two boards, this wont be a good idea.

And just remember again: Ratinds: 8pin connector 150w, 6pin connector 75w.
[edit]

astraleureka

member

Activity: 236

Merit: 16

It's not a cheat.

elmond

newbie

Activity: 49

Merit: 0

Quote from: baikal on November 03, 2018, 04:03:53 AM

Hello, Thanks for the support on Baikal miner.

BK-G28 will need total 14 PCI-E plugs and it is recommended that all 14 connectors connected, but if are not able to get enough plug, make it at least 9 connectors plugged. see below:
There is no PCI-E cable included in the box, kindly note this.

"2 hash boards, with fan cable attached, plug two connectors, other 5 hash boards can plug just one connector“

https://i.imgur.com/qpZcwkwl.png

interesting, do this cheat also apply to baikal x10

astraleureka

member

Activity: 236

Merit: 16

The hashrate report is correct, it is generating that number of hashes, but there is damage or other problems preventing valid shares.

Meteorite777

jr. member

Activity: 68

Merit: 6

I got my BK-G28 delivered yesterday. I have it up and running on Skein but am only getting 12 GH/s poolside instead of 14 GH/s advertised; tried two different pools so far.

Baikal Miner Web UI is useless for checking actual hash rate and it just seems to display a dummy number per card no matter what. Case in point: one of the hash-boards on my BK-X10 is seemingly dead 2 months after ordering, and the web UI still shows 1.746 Gh/s for the board and 3 boards for 5.238 Gh/s total; just that it shows 0 accepted shares on the faulty board. Pool-side shows around 3 GH/s because of the broken board despite that Baikal Web UI shows 5.238 GH/s

It seems BK-G28 behaves similarly and shows the hardcoded advertised speed of 2.028 Gh/s per board for 14.19Gh/s total no matter what. Either that; or my broken board on my BK-X10 IS still hashing at 1.76 GH/s and it's reporting correctly and just for some reason is getting no shares.

yrk1957

member

Activity: 529

Merit: 29

Quote from: Andartis on November 03, 2018, 06:55:49 PM

Quote from: aga0685 on November 03, 2018, 01:45:29 PM

Quote from: Andartis on November 03, 2018, 10:11:41 AM

Guys, jsut for you to know: Shipping is withing 10 (!!!) days after payment received from baikal. Thats bad....

And now the profit with Groestl algo is 8.38 $/day....... i think that ROI of this G28 that will arrive now is very difficult/impossibile..... .........

Anyone with a little knowledge should have seen that this would happen within days and should not have calculated with the big initial Groestl profits.

...and its easy to infer that releasing Groestl on X10 would have been useless given so many X10's out there.

Baikal tried to make the best of the situation, just released it on G28 to make a quick buck, nothing more. But that trick is over now.

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: aga0685 on November 03, 2018, 01:45:29 PM

Quote from: Andartis on November 03, 2018, 10:11:41 AM

Guys, jsut for you to know: Shipping is withing 10 (!!!) days after payment received from baikal. Thats bad....

And now the profit with Groestl algo is 8.38 $/day....... i think that ROI of this G28 that will arrive now is very difficult/impossibile..... .........

Anyone with a little knowledge should have seen that this would happen within days and should not have calculated with the big initial Groestl profits.

aga0685

sr. member

Activity: 337

Merit: 283

Quote from: Andartis on November 03, 2018, 10:11:41 AM

Guys, jsut for you to know: Shipping is withing 10 (!!!) days after payment received from baikal. Thats bad....

And now the profit with Groestl algo is 8.38 $/day....... i think that ROI of this G28 that will arrive now is very difficult/impossibile..... .........

Andartis

jr. member

Activity: 306

Merit: 7

Guys, jsut for you to know: Shipping is withing 10 (!!!) days after payment received from baikal. Thats bad....

baikal

full member

Activity: 129

Merit: 100

www.baikalminer.com

Hello, Thanks for the support on Baikal miner.

BK-G28 will need total 14 PCI-E plugs and it is recommended that all 14 connectors connected, but if are not able to get enough plug, make it at least 9 connectors plugged. see below:
There is no PCI-E cable included in the box, kindly note this.

"2 hash boards, with fan cable attached, plug two connectors, other 5 hash boards can plug just one connector“

iggypi

newbie

Activity: 9

Merit: 1

If you guys order some, don't forget to order 6pin PCI-E splitter cable, this time, Baikal delivers not cables at all Sad

And you need to know there are 14 6pin molex connectors on the BK-G28, so order plenty of this splitter cables.

customarea001

newbie

Activity: 3

Merit: 0

Quote from: Dash2017 on November 01, 2018, 05:29:20 PM

Quote from: nadeaup on November 01, 2018, 05:12:49 PM

I'll pull the firmware and try it out in my BK-X10 in the next day or 2..

would be great if you could post the firmware here to download, my network technician can then look at it and test whether it is accordingly adaptable to the X10, this possibility I would have

Do you have any link we can download?

tbadde

brand new

Activity: 0

Merit: 1

is there someone with the new Firmware?

Topic: NEW BAIKAL MINER BK-G28 released. - page 6. (Read 30074 times)