NEW BAIKAL MINER BK-G28 released. - page 5.

iwouldifiwereyou

newbie

Activity: 7

Merit: 0

Quote from: VoskCoin on November 16, 2018, 10:06:50 AM

anyone have their g28 crash on groestl?

how awesome Vosk! I have watched every video you've made, you're awesome! I just got an X10 and was trying to get the other algos loaded, or the script to switch between most profitable but i can't make any sense of it. I took the machine apart, and looked at the Sd card and it only has 3 files on it, can I just replace the .bin file with the updates I've seen? It's only a few kilobytes, but so are the replacements.
Like this one. GX10_V16_20171111 (From X10 v1.1 Image) - Copy.bin

can I just replace the script.bin file on the SD card? The card only has like 60 megabytes space, so it can't take the full image I've seen thats like 4 gig. I guess I'm not comprehending how this miner works at all. Any help anyone? I'll give you teamviewer access if you would

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Quote from: grendel25 on November 16, 2018, 05:15:34 PM

Just been reading through this thread and goodness does it sound dreadful. I'm still looking for a good opportunity to get in on an ASIC but so far they all seem so risky.

Guess I'll have to be patient and watch for now.

How do you have a legendary account and are not sure on asics? Not a troll, really asking.

Andartis

jr. member

Activity: 306

Merit: 7

Temps?
My experiences are, Baikals tend to hang and crash if temp is over 55°C. Depending on Algo.

Quote from: VoskCoin on November 16, 2018, 10:06:50 AM

anyone have their g28 crash on groestl?

grendel25

legendary

Activity: 2296

Merit: 1031

Just been reading through this thread and goodness does it sound dreadful. I'm still looking for a good opportunity to get in on an ASIC but so far they all seem so risky.

Guess I'll have to be patient and watch for now.

acidus77

newbie

Activity: 10

Merit: 0

I have issue with new g28 that only one board is getting shares, middle one, all other boards are hashing (asics dashboard) but pool hashrate only from that one middle board. Tried other pools and algos but problem is same.

astraleureka

member

Activity: 236

Merit: 16

Vosk, what are the symptoms of the crash - does the miner lock up entirely, or does it just stop hashing (either on one board or all) ?

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

anyone have their g28 crash on groestl?

Iomgui

newbie

Activity: 30

Merit: 0

I really think 14GH is the capacity of G28 skein.
But there s Something wrong the "dacc" is around 80 to 90% on the G28 with difficulty managed by suprnova. This is too low, in comparison the X10 on same pool is around 99% explaining X10 is at nominal hashrate.

I tried to force difficulty on suprnova skein for the G28, but with no luck so far the best i achived is an average 12,8 GH/s which is still far from 14GH.

My guess is it is pool related. Though i contacted them twice by their support form and on twitter and NO answer since 48H.

cuong_cash

newbie

Activity: 2

Merit: 0

Quote from: Iomgui on November 15, 2018, 08:51:24 AM

Yes Groestl algo i have no problem.
Skein algo tested on suprnova, miningpoolhub and now zpool have all the same problems : hashrate betwenn -30% and -10%. Average on 12h on any of these pools is 11,8GH instead of 14GH

i think problem is the network hashrate on the g28 configurations web page can view the hashrate is 14GH with skein algo and the orther with the same with specifications

Andartis

jr. member

Activity: 306

Merit: 7

Got mine now.
Assembly quality really poor. Three hasboards of three different miners were put in not straight. They were bent and a capacitor broke. I removed that hasboard so that the miner works with one hashboard less.
Otherwise like the BK-X.

Iomgui

newbie

Activity: 30

Merit: 0

Yes Groestl algo i have no problem.
Skein algo tested on suprnova, miningpoolhub and now zpool have all the same problems : hashrate betwenn -30% and -10%. Average on 12h on any of these pools is 11,8GH instead of 14GH

cuong_cash

newbie

Activity: 2

Merit: 0

Quote from: Iomgui on November 12, 2018, 10:10:51 AM

The option is baikal-fan
For Skein i set 10% and it remains below 30 degrees. It is still a little loud.
50% and 100% are almost as loud so i think thats why you hear no difference.

The main problem i have is the average hashrate reported on suprnova for G28 is 20% less than it should be (with high fluctuations it can goes from -40% to -10% averaged on 5 units). Whereas with X10 still on suprnova the average hashrate is 100% as advertised (fluctuations are small 5% with 5 units). this is for skein algo.
Anyone had the same problem ?

my G28 mine groesltcoin in miningpoolhub with hashrate 27GH

allnewbie

member

Activity: 78

Merit: 10

Quote from: Iomgui on November 12, 2018, 10:10:51 AM

The option is baikal-fan
For Skein i set 10% and it remains below 30 degrees. It is still a little loud.
50% and 100% are almost as loud so i think thats why you hear no difference.

The main problem i have is the average hashrate reported on suprnova for G28 is 20% less than it should be (with high fluctuations it can goes from -40% to -10% averaged on 5 units). Whereas with X10 still on suprnova the average hashrate is 100% as advertised (fluctuations are small 5% with 5 units). this is for skein algo.
Anyone had the same problem ?

waiting my machine. its on the road. does other algorithm act same?

Iomgui

newbie

Activity: 30

Merit: 0

The option is baikal-fan
For Skein i set 10% and it remains below 30 degrees. It is still a little loud.
50% and 100% are almost as loud so i think thats why you hear no difference.

The main problem i have is the average hashrate reported on suprnova for G28 is 20% less than it should be (with high fluctuations it can goes from -40% to -10% averaged on 5 units). Whereas with X10 still on suprnova the average hashrate is 100% as advertised (fluctuations are small 5% with 5 units). this is for skein algo.
Anyone had the same problem ?

iggypi

newbie

Activity: 9

Merit: 1

has anyone managed to setup the fan speed over the web interface ?
I set it to 50% but it stays at loud as it was before, rpm doesn't change.
100% is ok for x11, but for Myr Groest and skein its not really necessary.

Iomgui

newbie

Activity: 30

Merit: 0

Ok to answer to myself :

Invalid shares was the result of either a faulty switch or IP conflict (all my switches being Netgear prosafe). Strange thing, if i add a new cpl plug i have the same colficting problem than whith the supposedly faulty switch …

In regards to Hashrate :
suprnova skein : its more around 13GH/s on average (calculated 2 hours)
zpool skein : i have the same result betwee 12,5 to 13,5 GH (2h with 5 x G28)

So far suprnova payout > by 20% of Zpool skein (paid in DGB), calcultaed on 24h with 5 G28 (not the one i used for tests so with stable hashrate). Luck difference being 5% in advantage to suprnova

AtlasMiner

newbie

Activity: 5

Merit: 0

Quote from: nadeaup on November 01, 2018, 04:12:49 PM

I'll pull the firmware and try it out in my BK-X10 in the next day or 2..

Doesn't work. You will destroy you PI unit.

AtlasMiner

newbie

Activity: 5

Merit: 0

Do you know how to configure miner for zpool and auto algorithm switching? Could never get my BK-X10 working correctly on Zpool so I am wondering if the BK-G28 will have problems...

Iomgui

newbie

Activity: 30

Merit: 0

I have the same problem about false hashrate.

Skein, advertise 14,19 GH/s but :
- suprnova : hashrate at around 12GH and 20% invalide share, those invalid shares show in Baikal UI too
- mining pool hub : hashrate average on 1 H between 11GH and 12GH, 12% invalid share on mining pool Dashboard and 0% invalid on baikal UI

Myr Groest : exactly same problem on suprnova (Verge).

I ll do more tests.

Nota : tests done with at least 5 x G28 unit at the same time

iggypi

newbie

Activity: 9

Merit: 1

Quote from: Meteorite777 on November 06, 2018, 10:26:04 AM

I got my BK-G28 delivered yesterday. I have it up and running on Skein but am only getting 12 GH/s poolside instead of 14 GH/s advertised; tried two different pools so far.

Baikal Miner Web UI is useless for checking actual hash rate and it just seems to display a dummy number per card no matter what. Case in point: one of the hash-boards on my BK-X10 is seemingly dead 2 months after ordering, and the web UI still shows 1.746 Gh/s for the board and 3 boards for 5.238 Gh/s total; just that it shows 0 accepted shares on the faulty board. Pool-side shows around 3 GH/s because of the broken board despite that Baikal Web UI shows 5.238 GH/s

It seems BK-G28 behaves similarly and shows the hardcoded advertised speed of 2.028 Gh/s per board for 14.19Gh/s total no matter what. Either that; or my broken board on my BK-X10 IS still hashing at 1.76 GH/s and it's reporting correctly and just for some reason is getting no shares.

had the same problem mining digibyte over myriad groestl and I solved it by switch from suprnova and blocksfactory where always hash rate sometime vanishes to mining hub, pretty steady hashrate since then.

Topic: NEW BAIKAL MINER BK-G28 released. - page 5. (Read 30138 times)