I get an error when I launch the program
http://prntscr.com/iig0jg
I will transalte because it's in Italian. When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel
and then all the rest...
I tried the program on 2 different computers. On both I have the same error.
how can I fix it?
Topic: NPlusMiner - |MultiRig remote management|AI|Autoupdate|Pool/Algo switching - page 36. (Read 37329 times)
February 22, 2018, 03:51:58 PM
February 22, 2018, 03:30:38 PM
Can you please add HSR Justaminer fork "HP" version? It gives me the best hashrate over every other miner for neoscrypt. I tested with 12 x 1070ti
February 22, 2018, 03:08:12 PM
Please remove PalginHSR
too much error on hashrates values
even if the benchmark is ok, he updates values later with ridiculous hashrates
too much error on hashrates values
even if the benchmark is ok, he updates values later with ridiculous hashrates
February 22, 2018, 02:27:46 PM
Is it safe to copy stats folder from older release ?
Yes it isI have another question. How to setup multi pool on NPM? I would like to use both ahashpool and miningpoolhub if it is supported by NPM
Yes just use -PoolName ahashpool,miningpoolhub (or any combination)
If miningpoolhub in the list make sure that -Username is set
Thats what i did but it didnt work, i made mistake in adding new algo to list and put space behind , so it didnt work.
Fixed it and now its benchmarking, thanks.
Since your last update everything is working without problems.
February 22, 2018, 01:51:49 PM
Is it safe to copy stats folder from older release ?
It is on 1.3 if you upgrade from 1.2.1 or 1.2
It is not always the case depending on releases
February 22, 2018, 01:49:44 PM
Is it safe to copy stats folder from older release ?
Yes it isI have another question. How to setup multi pool on NPM? I would like to use both ahashpool and miningpoolhub if it is supported by NPM
Yes just use -PoolName ahashpool,miningpoolhub (or any combination)
If miningpoolhub in the list make sure that -Username is set
February 22, 2018, 01:36:52 PM
Is it safe to copy stats folder from older release ?
Yes it isI have another question. How to setup multi pool on NPM? I would like to use both ahashpool and miningpoolhub if it is supported by NPM
February 22, 2018, 09:06:11 AM
Is it safe to copy stats folder from older release ?
February 22, 2018, 08:48:21 AM
I tested all the Neoscrypt miners with my 1080ti and Excavator was the fastests. 1.4.3a for what its worth.
February 22, 2018, 08:15:18 AM
Is there any stats about pool profitable?
February 22, 2018, 07:26:57 AM
Thanks guys! Editing really helps!
February 22, 2018, 06:27:00 AM
https://i.imgur.com/pdWwskC.png
How to change hsrminer to KlausT? Hsrminer_neoskrypt works perfectly, but benchmarks... I have this problem only on my 70ti rigs, 80 rigs are OK
PS Screenshot is from 2.4.2, but I have same problem with bplus 1.3
How to change hsrminer to KlausT? Hsrminer_neoskrypt works perfectly, but benchmarks... I have this problem only on my 70ti rigs, 80 rigs are OK
PS Screenshot is from 2.4.2, but I have same problem with bplus 1.3
And try to youse Notepad ++ software for this change.
February 22, 2018, 02:00:57 AM
https://i.imgur.com/pdWwskC.png
How to change hsrminer to KlausT? Hsrminer_neoskrypt works perfectly, but benchmarks... I have this problem only on my 70ti rigs, 80 rigs are OK
PS Screenshot is from 2.4.2, but I have same problem with bplus 1.3
How to change hsrminer to KlausT? Hsrminer_neoskrypt works perfectly, but benchmarks... I have this problem only on my 70ti rigs, 80 rigs are OK
PS Screenshot is from 2.4.2, but I have same problem with bplus 1.3
Change # in miners folder. Put # in PalginHSR before neoscrypt and than open CcminerKlaust and remove # from neoscrypt
February 21, 2018, 10:51:37 PM
https://i.imgur.com/pdWwskC.png
How to change hsrminer to KlausT? Hsrminer_neoskrypt works perfectly, but benchmarks... I have this problem only on my 70ti rigs, 80 rigs are OK
PS Screenshot is from 2.4.2, but I have same problem with bplus 1.3
How to change hsrminer to KlausT? Hsrminer_neoskrypt works perfectly, but benchmarks... I have this problem only on my 70ti rigs, 80 rigs are OK
PS Screenshot is from 2.4.2, but I have same problem with bplus 1.3
February 21, 2018, 09:44:13 PM
MrPlus,
So I am having an issue getting the Earnings Tracking to show up. I have 2 rigs running nplus now but both are not showing. 1 on Zerg and another on Blaze.
On my screens I see BTC price
++++++
Running:
then all the miner info
I have seen from screenshots that is where the info is supposed to be.
I must have gone over the Readme a half dozen times double checking. You state it is started by default. This is what I have tried to so far.
1. I have included -UIStyle Full in my plus.bat .
2. I have tried pressing the e button and waiting for next refresh and getting nothing. 1 rig is on direct keyword and the other is via Teamviewer.
Any help would be appreciated.
l1one1
So I am having an issue getting the Earnings Tracking to show up. I have 2 rigs running nplus now but both are not showing. 1 on Zerg and another on Blaze.
On my screens I see BTC price
++++++
Running:
then all the miner info
I have seen from screenshots that is where the info is supposed to be.
I must have gone over the Readme a half dozen times double checking. You state it is started by default. This is what I have tried to so far.
1. I have included -UIStyle Full in my plus.bat .
2. I have tried pressing the e button and waiting for next refresh and getting nothing. 1 rig is on direct keyword and the other is via Teamviewer.
Any help would be appreciated.
l1one1
Using 1.3 I am now able to see Earnings estimate however I am getting this error above it. I am using Zpool.
1BTC = 10529.04 USD
+++++ 1MZ5hm1Lb9kEqdJAKbxLuHJsCYpwWaFfnNAttempted to divide by zero.
At C:\Miners\NPlusMiner-master\NPlusMiner-v1.3.ps1:405 char:69
+ ... -NoNewline; Write-Host " " $_.pool "Balance="$_.balance ("{0:P0}" -f ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (
[], RuntimeException+ FullyQualifiedErrorId : RuntimeException
Trust Level 0% [ 00 days 00:01 ]
Average BTC/H BTC = 0.00000000 | mBTC = 0.000
Average BTC/D BTC = 0.00000000 | mBTC = 0.000
Estimated Pay Date 2/21/2018 6:36:44 PM > BTC
+++++
Any help would be appreciated!
February 21, 2018, 07:53:41 PM
Can someone tell me how to set the bat file to mine in 2 pools at the same time? I can't get it to work..
February 21, 2018, 04:56:52 PM
No time for this on my side.
If anyone knows how/where to start an online poll and wants to take the time it would be great and helpful.
Question: Should the next version keep Palgin for Neoscrypt?
Thanks you!
If anyone knows how/where to start an online poll and wants to take the time it would be great and helpful.
Question: Should the next version keep Palgin for Neoscrypt?
Thanks you!
As requested (kinda).
http://www.strawpoll.me/15122211
Thanks you!
People speak out
February 21, 2018, 04:55:11 PM
No time for this on my side.
If anyone knows how/where to start an online poll and wants to take the time it would be great and helpful.
Question: Should the next version keep Palgin for Neoscrypt?
Thanks you!
If anyone knows how/where to start an online poll and wants to take the time it would be great and helpful.
Question: Should the next version keep Palgin for Neoscrypt?
Thanks you!
As requested (kinda).
http://www.strawpoll.me/15122211
February 21, 2018, 04:51:46 PM
Hey Every,
I replaced KlausT's miner with just a miners fork. Just renamed klaus' to ccminer.old and named jsutaminer's to ccminer.exe. I also set the flags -i 7 -c 4 inside of the klausT powershell script. Works fine.
edit: I also saw that the interval flag was removed from the .bat files. Was this intentional?
I replaced KlausT's miner with just a miners fork. Just renamed klaus' to ccminer.old and named jsutaminer's to ccminer.exe. I also set the flags -i 7 -c 4 inside of the klausT powershell script. Works fine
.edit: I also saw that the interval flag was removed from the .bat files. Was this intentional?
You can still use -Interval in your start file.
Removed from default bat for easy config but still available.
February 21, 2018, 04:24:01 PM
For people using 1.3 from master. Please update to the 1.3 release.
A couple changes have been made.
Thanks you
A couple changes have been made.
Thanks you
Jump to: