Topic: NPlusMiner - |MultiRig remote management|AI|Autoupdate|Pool/Algo switching - page 38. (Read 37605 times)
February 20, 2018, 04:41:40 PM
I'd also vote to remove Palagin. It seems hes gone mia from the dev side and it consistently just causes issues. I've been playing with justaminers fork but have been using klaus-T for the past few weeks.
February 20, 2018, 04:22:53 PM
I'm failing to repro the two miners opened
Thinking of taking Plagin away for NeoScrypt. Seems to be a lot issues with it.
Need more testimonies for decision.
You got my vote to replace Palgin's hsrminer_neoscript with whichever ccminer variant you already have runs neoscrypt.
And the formatting issue I just described seemed to get fixed after benchmarking completed. Not that it was a big issue in the first place.
February 20, 2018, 04:16:57 PM
Hey Mr. Plus:
I am also experience the issue with two miners being opened.
I also experience not all miners benchmarking on the first go around. If you run the reset profit script then re-launch the miner it will then see all algos and attempt to benchmark everything you selected.
I can also confirm recieving benchmark statistics that are wildly inaccurate (IE 14 GH/s for neoscrypt). I haven't witnessed this issue on x17 or this current master release specifically but I have on neoscrypt and tribus many times on previous releases.
Win 10 rig with 8 1080TI. Nothing else special about it. Up to date.. Nvidia 390 drivers and purely used for mining.
I am also experience the issue with two miners being opened.
I also experience not all miners benchmarking on the first go around. If you run the reset profit script then re-launch the miner it will then see all algos and attempt to benchmark everything you selected.
I can also confirm recieving benchmark statistics that are wildly inaccurate (IE 14 GH/s for neoscrypt). I haven't witnessed this issue on x17 or this current master release specifically but I have on neoscrypt and tribus many times on previous releases.
Win 10 rig with 8 1080TI. Nothing else special about it. Up to date.. Nvidia 390 drivers and purely used for mining.
I'm failing to repro the two miners opened
Thinking of taking Plagin away for NeoScrypt. Seems to be a lot issues with it.
Need more testimonies for decision.
February 20, 2018, 04:12:22 PM
Hey Mr. Plus:
I am also experience the issue with two miners being opened.
I also experience not all miners benchmarking on the first go around. If you run the reset profit script then re-launch the miner it will then see all algos and attempt to benchmark everything you selected.
I can also confirm recieving benchmark statistics that are wildly inaccurate (IE 14 GH/s for neoscrypt). I haven't witnessed this issue on x17 or this current master release specifically but I have on neoscrypt and tribus many times on previous releases.
Win 10 rig with 8 1080TI. Nothing else special about it. Up to date.. Nvidia 390 drivers and purely used for mining.
I am also experience the issue with two miners being opened.
I also experience not all miners benchmarking on the first go around. If you run the reset profit script then re-launch the miner it will then see all algos and attempt to benchmark everything you selected.
I can also confirm recieving benchmark statistics that are wildly inaccurate (IE 14 GH/s for neoscrypt). I haven't witnessed this issue on x17 or this current master release specifically but I have on neoscrypt and tribus many times on previous releases.
Win 10 rig with 8 1080TI. Nothing else special about it. Up to date.. Nvidia 390 drivers and purely used for mining.
February 20, 2018, 04:07:00 PM
4 - On this one version upgrade (Not true for all versions) you could copy your stats folder over to avoid benchmarks if on the same rig.
I did just that and it looks like the table columns are compressed or otherwise not formatted properly:
Code:
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
CcminerAlexis78Phi Phi 24.65 MH/s 0.356 0.00036 4.188 0.01446 zpoolplus-
CcminerTpruvotcuda9 Tribus 74.54 MH/s 0.318 0.00032 3.731 0.00426 zpoolplus-
ccminerpolytimos X17 13.78 MH/s 0.316 0.00032 3.716 0.02295 zpoolplus-
CcminerAlexis78c... Xevan 4.21 MH/s 0.264 0.00026 3.099 0.06269 zpoolplus-
CcminerTpruvotx64 Lyra2z 2.22 MH/s 0.253 0.00025 2.974 0.11416 zpoolplus-
ccminerpolytimos Lyra2RE2 51.35 MH/s 0.250 0.00025 2.938 0.00487 zpoolplus-
ccminerpolytimos C11 21.05 MH/s 0.246 0.00025 2.886 0.01167 zpoolplus-
ccminerpolytimos Nist5 57.22 MH/s 0.242 0.00024 2.843 0.00423 zpoolplus-
ccminerpolytimos Skein ...42 MH/s 0.233 0.00023 2.742 0.00034 zpoolplus-
CcminerTpruvot Bitcore 17.34 MH/s 0.224 0.00022 2.628 0.01290 zpoolplus-
DSTM Equihash ...85 H/s 0.221 0.00022 2.595 429.79544 zpoolplus-
CcminerTpruvotcuda9 X11evo 15.07 MH/s 0.209 0.00021 2.453 0.01386 zpoolplus-
ccminerAlexis78 Hsr 14.95 MH/s 0.176 0.00018 2.068 0.01177 zpoolplus-
ccminerpolytimos Blake2s 5.12 GH/s 0.127 0.00013 1.490 0.00002 zpoolplus-
ccminerAlexis78 Blakecoin 6.27 GH/s 0.080 0.00008 0.939 0.00001 zpoolplus-
ccminerAlexis78 Sib 16.23 MH/s 0.057 0.00006 0.672 0.00352 zpoolplus-
PalginHSR NeoScrypt ...marking ...rking ...king ...king 0.18308 zpoolplus-
----- --------- ----- -------- ------- ------- ---------- ----
CcminerAlexis78Phi Phi 24.65 MH/s 0.356 0.00036 4.188 0.01446 zpoolplus-
CcminerTpruvotcuda9 Tribus 74.54 MH/s 0.318 0.00032 3.731 0.00426 zpoolplus-
ccminerpolytimos X17 13.78 MH/s 0.316 0.00032 3.716 0.02295 zpoolplus-
CcminerAlexis78c... Xevan 4.21 MH/s 0.264 0.00026 3.099 0.06269 zpoolplus-
CcminerTpruvotx64 Lyra2z 2.22 MH/s 0.253 0.00025 2.974 0.11416 zpoolplus-
ccminerpolytimos Lyra2RE2 51.35 MH/s 0.250 0.00025 2.938 0.00487 zpoolplus-
ccminerpolytimos C11 21.05 MH/s 0.246 0.00025 2.886 0.01167 zpoolplus-
ccminerpolytimos Nist5 57.22 MH/s 0.242 0.00024 2.843 0.00423 zpoolplus-
ccminerpolytimos Skein ...42 MH/s 0.233 0.00023 2.742 0.00034 zpoolplus-
CcminerTpruvot Bitcore 17.34 MH/s 0.224 0.00022 2.628 0.01290 zpoolplus-
DSTM Equihash ...85 H/s 0.221 0.00022 2.595 429.79544 zpoolplus-
CcminerTpruvotcuda9 X11evo 15.07 MH/s 0.209 0.00021 2.453 0.01386 zpoolplus-
ccminerAlexis78 Hsr 14.95 MH/s 0.176 0.00018 2.068 0.01177 zpoolplus-
ccminerpolytimos Blake2s 5.12 GH/s 0.127 0.00013 1.490 0.00002 zpoolplus-
ccminerAlexis78 Blakecoin 6.27 GH/s 0.080 0.00008 0.939 0.00001 zpoolplus-
ccminerAlexis78 Sib 16.23 MH/s 0.057 0.00006 0.672 0.00352 zpoolplus-
PalginHSR NeoScrypt ...marking ...rking ...king ...king 0.18308 zpoolplus-
Note Skein and Equihash hashrates, as well as the "benchmarking" stats for NeoScrypt in particular.
February 20, 2018, 03:58:52 PM
Okay, a 3rd and fatal issue - the currently running miner is not closed before the next miner is started, and, in fact, both miners attempt to run concurrently for at least 1 minute, maybe longer but I closed the NPlusMiner window to avoid crashing the display driver from two miners fighting.
Furthermore, closing the NPlusMiner window did not close the first miner; it did close the second, however.
EDIT - also, checking the miner.log file for clues I see that the hashrate for the X17 algo is absurdly high:
If a single GTX 1080 can bring in 10.9 mBTC per day I need to get more of them pronto!
Furthermore, closing the NPlusMiner window did not close the first miner; it did close the second, however.
EDIT - also, checking the miner.log file for clues I see that the hashrate for the X17 algo is absurdly high:
Code:
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos X17 476.58 MH/s 10.906 0.01091 127.977 0.02288 zp...
CcminerTpruvot Bitcore 655.27 MH/s 8.444 0.00844 99.095 0.01289 zp...
CcminerTpruvotcuda9 Tribus Benchmarking Benchmarking Benchmarking Benchmarking 0.00382 zp...
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos X17 476.58 MH/s 10.906 0.01091 127.977 0.02288 zp...
CcminerTpruvot Bitcore 655.27 MH/s 8.444 0.00844 99.095 0.01289 zp...
CcminerTpruvotcuda9 Tribus Benchmarking Benchmarking Benchmarking Benchmarking 0.00382 zp...
If a single GTX 1080 can bring in 10.9 mBTC per day I need to get more of them pronto!
Any others seeing this. If so, can you share your rig details?
February 20, 2018, 03:57:30 PM
1 - you are right, Earning tracker considers only BTC. Values might be right in XVG but the BTC symbol is hardcoded.
2 - Seems like the connection error is about version checking. No big deal.
3 - Don't get why it's not benchmarking all selected algos. Need to investigate.
4 - On this one version upgrade (Not true for all versions) you could copy your stats folder over to avoid benchmarks if on the same rig.
2 - Seems like the connection error is about version checking. No big deal.
3 - Don't get why it's not benchmarking all selected algos. Need to investigate.
4 - On this one version upgrade (Not true for all versions) you could copy your stats folder over to avoid benchmarks if on the same rig.
See the edit I did to my previous post - I'm also experiencing the same issue as others where the currently running miner isn't closed before the next one is started... or, perhaps, ever closed at all...
February 20, 2018, 03:55:09 PM
I figured it out already: use the clone/download button and select download as a zip for those who are still wondering.
Please note that 1.3 is opened for test. Not a release. Use at your own risk.
Thanks for the ones willing to take the risk. Feedback on your tests will help.
Couple of things I can tell you so far, even as it is doing the benchmarking again...
First: I am trying this out with an XVG address on ZPool, not BTC, because it makes tracking earnings easier and eliminates the additional 5% fee charged for converting to BTC. However, your earningstracker batch file seems to assume only BTC as a payout option.
Second: the first time I ran my slightly modified startzpoolplus.bat (with an XVG address and some of the algos deleted) only 8 of the 17 algos I had selected were queued up for benchmarking; here is the beginning of the miner.log if it helps:
Code:
**********************
Windows PowerShell transcript start
Start time: 20180220151144
Username: JSJ-RYZEN\jsj
RunAs User: JSJ-RYZEN\jsj
Configuration Name:
Machine: JSJ-RYZEN (Microsoft Windows NT 10.0.16299.0)
Host Application: powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle minimized -command &.\NPlusMiner-v1.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency USD -Passwordcurrency XVG -Wallet DGZ73Rx7jfbCfBcYtKPN7oiXCgQ1kqxPya -Location US -ActiveMinerGainPct 3 -PoolName zpoolplus -WorkerName ID=eleusis1 -Type nvidia -Algorithm hsr,xevan,tribus,phi,c11,skein,equihash,x11evo,sib,bitcore,x17,blakecoin,Nist5,Lyra2RE2,neoscrypt,blake2s,lyra2z
Process ID: 3964
PSVersion: 5.1.16299.248
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.16299.248
BuildVersion: 10.0.16299.248
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1
**********************
Transcript started, output file is .\Logs\miner.log
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server" <<<<<<<<<<<<<<<<<<<<<<<<<<
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Loading miners..
Downloading ccminerAlexis78..
Downloading CcminerAlexis78cuda9..
Downloading CcminerAlexis78Phi..
Downloading ccminerpolytimos..
Downloading CcminerTpruvot..
Downloading CcminerTpruvotcuda9..
Downloading CcminerTpruvotx64..
Downloading DSTM..
Downloading PalginHSR..
Launching Prerun: .\Prerun\default.bat
1BTC = 11650 USD
+++++
Type: NVIDIA
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos Skein Benchmarking Benchmarking Benchmarking Benchmarking 0.00034 zpo...
ccminerpolytimos Nist5 Benchmarking Benchmarking Benchmarking Benchmarking 0.00025 zpo...
CcminerTpruvotcuda9 X11evo Benchmarking Benchmarking Benchmarking Benchmarking 0.01722 zpo...
ccminerpolytimos X17 Benchmarking Benchmarking Benchmarking Benchmarking 0.04775 zpo...
ccminerAlexis78 Sib Benchmarking Benchmarking Benchmarking Benchmarking 0.01620 zpo...
ccminerAlexis78 Hsr Benchmarking Benchmarking Benchmarking Benchmarking 0.01875 zpo...
ccminerpolytimos Lyra2RE2 Benchmarking Benchmarking Benchmarking Benchmarking 0.00761 zpo...
ccminerpolytimos C11 Benchmarking Benchmarking Benchmarking Benchmarking 0.00683 zpo...
Running:
Speed Started Active Cnt Command
----- ------- ------ --- -------
0.00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a skein -o
stratum+tcp://skein.mine.zpool.ca:4933 -u
DGZ73Rx7jfbCfBcYtKPN7oiXCgQ1kqxPya -p ID=eleusis1,c=XVG -d 0
--------------------------------------------------------------------------------
Last Refresh: 02/20/2018 15:14:42
Sleep 300 sec
Windows PowerShell transcript start
Start time: 20180220151144
Username: JSJ-RYZEN\jsj
RunAs User: JSJ-RYZEN\jsj
Configuration Name:
Machine: JSJ-RYZEN (Microsoft Windows NT 10.0.16299.0)
Host Application: powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle minimized -command &.\NPlusMiner-v1.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency USD -Passwordcurrency XVG -Wallet DGZ73Rx7jfbCfBcYtKPN7oiXCgQ1kqxPya -Location US -ActiveMinerGainPct 3 -PoolName zpoolplus -WorkerName ID=eleusis1 -Type nvidia -Algorithm hsr,xevan,tribus,phi,c11,skein,equihash,x11evo,sib,bitcore,x17,blakecoin,Nist5,Lyra2RE2,neoscrypt,blake2s,lyra2z
Process ID: 3964
PSVersion: 5.1.16299.248
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.16299.248
BuildVersion: 10.0.16299.248
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1
**********************
Transcript started, output file is .\Logs\miner.log
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server" <<<<<<<<<<<<<<<<<<<<<<<<<<
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Loading miners..
Downloading ccminerAlexis78..
Downloading CcminerAlexis78cuda9..
Downloading CcminerAlexis78Phi..
Downloading ccminerpolytimos..
Downloading CcminerTpruvot..
Downloading CcminerTpruvotcuda9..
Downloading CcminerTpruvotx64..
Downloading DSTM..
Downloading PalginHSR..
Launching Prerun: .\Prerun\default.bat
1BTC = 11650 USD
+++++
Type: NVIDIA
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos Skein Benchmarking Benchmarking Benchmarking Benchmarking 0.00034 zpo...
ccminerpolytimos Nist5 Benchmarking Benchmarking Benchmarking Benchmarking 0.00025 zpo...
CcminerTpruvotcuda9 X11evo Benchmarking Benchmarking Benchmarking Benchmarking 0.01722 zpo...
ccminerpolytimos X17 Benchmarking Benchmarking Benchmarking Benchmarking 0.04775 zpo...
ccminerAlexis78 Sib Benchmarking Benchmarking Benchmarking Benchmarking 0.01620 zpo...
ccminerAlexis78 Hsr Benchmarking Benchmarking Benchmarking Benchmarking 0.01875 zpo...
ccminerpolytimos Lyra2RE2 Benchmarking Benchmarking Benchmarking Benchmarking 0.00761 zpo...
ccminerpolytimos C11 Benchmarking Benchmarking Benchmarking Benchmarking 0.00683 zpo...
Running:
Speed Started Active Cnt Command
----- ------- ------ --- -------
0.00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a skein -o
stratum+tcp://skein.mine.zpool.ca:4933 -u
DGZ73Rx7jfbCfBcYtKPN7oiXCgQ1kqxPya -p ID=eleusis1,c=XVG -d 0
--------------------------------------------------------------------------------
Last Refresh: 02/20/2018 15:14:42
Sleep 300 sec
I added
1 - you are right, Earning tracker considers only BTC. Values might be right in XVG but the BTC symbol is hardcoded.
2 - Seems like the connection error is about version checking. No big deal.
3 - Don't get why it's not benchmarking all selected algos. Need to investigate.
4 - On this one version upgrade (Not true for all versions) you could copy your stats folder over to avoid benchmarks if on the same rig.
February 20, 2018, 03:52:39 PM
Okay, a 3rd and fatal issue - the currently running miner is not closed before the next miner is started, and, in fact, both miners attempt to run concurrently for at least 1 minute, maybe longer but I closed the NPlusMiner window to avoid crashing the display driver from two miners fighting.
Furthermore, closing the NPlusMiner window did not close the first miner; it did close the second, however.
EDIT - also, checking the miner.log file for clues I see that the hashrate for the X17 algo is absurdly high:
If a single GTX 1080 can bring in 10.9 mBTC per day I need to get more of them pronto!
Furthermore, closing the NPlusMiner window did not close the first miner; it did close the second, however.
EDIT - also, checking the miner.log file for clues I see that the hashrate for the X17 algo is absurdly high:
Code:
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos X17 476.58 MH/s 10.906 0.01091 127.977 0.02288 zp...
CcminerTpruvot Bitcore 655.27 MH/s 8.444 0.00844 99.095 0.01289 zp...
CcminerTpruvotcuda9 Tribus Benchmarking Benchmarking Benchmarking Benchmarking 0.00382 zp...
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos X17 476.58 MH/s 10.906 0.01091 127.977 0.02288 zp...
CcminerTpruvot Bitcore 655.27 MH/s 8.444 0.00844 99.095 0.01289 zp...
CcminerTpruvotcuda9 Tribus Benchmarking Benchmarking Benchmarking Benchmarking 0.00382 zp...
If a single GTX 1080 can bring in 10.9 mBTC per day I need to get more of them pronto!
February 20, 2018, 03:42:23 PM
I figured it out already: use the clone/download button and select download as a zip for those who are still wondering.
Please note that 1.3 is opened for test. Not a release. Use at your own risk.
Thanks for the ones willing to take the risk. Feedback on your tests will help.
Couple of things I can tell you so far, even as it is doing the benchmarking again...
First: I am trying this out with an XVG address on ZPool, not BTC, because it makes tracking earnings easier and eliminates the additional 5% fee charged for converting to BTC. However, your earningstracker batch file seems to assume only BTC as a payout option.
Second: the first time I ran my slightly modified startzpoolplus.bat (with an XVG address and some of the algos deleted) only 8 of the 17 algos I had selected were queued up for benchmarking; here is the beginning of the miner.log if it helps:
Code:
**********************
Windows PowerShell transcript start
Start time: 20180220151144
Username: JSJ-RYZEN\jsj
RunAs User: JSJ-RYZEN\jsj
Configuration Name:
Machine: JSJ-RYZEN (Microsoft Windows NT 10.0.16299.0)
Host Application: powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle minimized -command &.\NPlusMiner-v1.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency USD -Passwordcurrency XVG -Wallet DGZ73Rx7jfbCfBcYtKPN7oiXCgQ1kqxPya -Location US -ActiveMinerGainPct 3 -PoolName zpoolplus -WorkerName ID=eleusis1 -Type nvidia -Algorithm hsr,xevan,tribus,phi,c11,skein,equihash,x11evo,sib,bitcore,x17,blakecoin,Nist5,Lyra2RE2,neoscrypt,blake2s,lyra2z
Process ID: 3964
PSVersion: 5.1.16299.248
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.16299.248
BuildVersion: 10.0.16299.248
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1
**********************
Transcript started, output file is .\Logs\miner.log
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server" <<<<<<<<<<<<<<<<<<<<<<<<<<
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Loading miners..
Downloading ccminerAlexis78..
Downloading CcminerAlexis78cuda9..
Downloading CcminerAlexis78Phi..
Downloading ccminerpolytimos..
Downloading CcminerTpruvot..
Downloading CcminerTpruvotcuda9..
Downloading CcminerTpruvotx64..
Downloading DSTM..
Downloading PalginHSR..
Launching Prerun: .\Prerun\default.bat
1BTC = 11650 USD
+++++
Type: NVIDIA
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos Skein Benchmarking Benchmarking Benchmarking Benchmarking 0.00034 zpo...
ccminerpolytimos Nist5 Benchmarking Benchmarking Benchmarking Benchmarking 0.00025 zpo...
CcminerTpruvotcuda9 X11evo Benchmarking Benchmarking Benchmarking Benchmarking 0.01722 zpo...
ccminerpolytimos X17 Benchmarking Benchmarking Benchmarking Benchmarking 0.04775 zpo...
ccminerAlexis78 Sib Benchmarking Benchmarking Benchmarking Benchmarking 0.01620 zpo...
ccminerAlexis78 Hsr Benchmarking Benchmarking Benchmarking Benchmarking 0.01875 zpo...
ccminerpolytimos Lyra2RE2 Benchmarking Benchmarking Benchmarking Benchmarking 0.00761 zpo...
ccminerpolytimos C11 Benchmarking Benchmarking Benchmarking Benchmarking 0.00683 zpo...
Running:
Speed Started Active Cnt Command
----- ------- ------ --- -------
0.00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a skein -o
stratum+tcp://skein.mine.zpool.ca:4933 -u
DGZ73Rx7jfbCfBcYtKPN7oiXCgQ1kqxPya -p ID=eleusis1,c=XVG -d 0
--------------------------------------------------------------------------------
Last Refresh: 02/20/2018 15:14:42
Sleep 300 sec
I added
February 20, 2018, 03:27:04 PM
Could you try 1.3 from master?
Where is 1.3 master? 1.2.1 is still showing as the latest version on your github releases page.
https://github.com/MrPlusGH/NPlusMiner
I figured it out already: use the clone/download button and select download as a zip for those who are still wondering.
Please note that 1.3 is opened for test. Not a release. Use at your own risk.
Thanks for the ones willing to take the risk. Feedback on your tests will help.
February 20, 2018, 03:17:53 PM
Could you try 1.3 from master?
Where is 1.3 master? 1.2.1 is still showing as the latest version on your github releases page.
https://github.com/MrPlusGH/NPlusMiner
I figured it out already: use the clone/download button and select download as a zip for those who are still wondering.
February 20, 2018, 03:15:04 PM
Could you try 1.3 from master?
Where is 1.3 master? 1.2.1 is still showing as the latest version on your github releases page.
https://github.com/MrPlusGH/NPlusMiner
https://github.com/MrPlusGH/NPlusMiner/archive/master.zip
Do not consider this as a release
February 20, 2018, 03:10:39 PM
@MrPlus
It does not appear to write the stats down correctly. Furthermore it seems to open a second miner before closing the first one and they seem to run concurrently for about 10 minutes. Then the original miner is closed but it doesn't appear to log the stats anywhere. I know I can set them manually but that's less than ideal.
Thanks!
It does not appear to write the stats down correctly. Furthermore it seems to open a second miner before closing the first one and they seem to run concurrently for about 10 minutes. Then the original miner is closed but it doesn't appear to log the stats anywhere. I know I can set them manually but that's less than ideal.
Thanks!
I confirm !! The data is not updated !! 2 miners open at the same time !!
I did re-run a 10 hours test or the four supported pools on the Plus logic with no issue.
However, there are cases where windows does cache web requests and return the cache rather than the live value. Which might be what happened on your rig.
I just implemented cache bypass to fix this scenario on Master. Will be in next release.
If you can update from master, this fix should fix your issue.
https://github.com/MrPlusGH/NPlusMiner/issues/17
Would appreciate if you can confirm.
Thank you
master. The result is the same.
It seems that the problem is only for my rig on win7.
Rig N2 on Win10 works correctly.
Thank you
Tried to PM you but bloked as newbie. Would need your help to understand this one...
February 20, 2018, 02:56:15 PM
@Mr.Plus
I have replaced the brain folder. On launch it did not appear to update profits. To remedy this I ran the reset profits.bat and it has successfully updated.
I am currently monitoring the program to see if updates are posted on the 10 minute interval set. I have an unfortunate feeling it is not but I'll update you with a definite once I know.
Edit: Thank you for the quick update. Seems to be working as intended!
Side Question:
What would be the best way for me to adjust the profits down for a specific algo? IE: I have a miner that takes a dev fee (3 minutes) but yields better results. It's worth using if I were to mine the algo for any amount of time greater than 15 minutes.
Option One) Chance sleep interval to 15 minutes and manually move the hashrate of the miner down by 20%. Any other options?
Thanks!
I have replaced the brain folder. On launch it did not appear to update profits. To remedy this I ran the reset profits.bat and it has successfully updated.
Edit: Thank you for the quick update. Seems to be working as intended!
Side Question:
What would be the best way for me to adjust the profits down for a specific algo? IE: I have a miner that takes a dev fee (3 minutes) but yields better results. It's worth using if I were to mine the algo for any amount of time greater than 15 minutes.
Option One) Chance sleep interval to 15 minutes and manually move the hashrate of the miner down by 20%. Any other options?
Thanks!
February 20, 2018, 02:49:53 PM
Could you try 1.3 from master?
Where is 1.3 master? 1.2.1 is still showing as the latest version on your github releases page.
https://github.com/MrPlusGH/NPlusMiner
February 20, 2018, 02:42:11 PM
Could you try 1.3 from master?
Where is 1.3 master? 1.2.1 is still showing as the latest version on your github releases page.
February 20, 2018, 02:33:50 PM
@MrPlus
It does not appear to write the stats down correctly. Furthermore it seems to open a second miner before closing the first one and they seem to run concurrently for about 10 minutes. Then the original miner is closed but it doesn't appear to log the stats anywhere. I know I can set them manually but that's less than ideal.
Thanks!
It does not appear to write the stats down correctly. Furthermore it seems to open a second miner before closing the first one and they seem to run concurrently for about 10 minutes. Then the original miner is closed but it doesn't appear to log the stats anywhere. I know I can set them manually but that's less than ideal.
Thanks!
I confirm !! The data is not updated !! 2 miners open at the same time !!
https://reho.st/self/2950beb084e3ee9778664cd8774d96d3aec6aa36.jpg
I did re-run a 10 hours test or the four supported pools on the Plus logic with no issue.
However, there are cases where windows does cache web requests and return the cache rather than the live value. Which might be what happened on your rig.
I just implemented cache bypass to fix this scenario on Master. Will be in next release.
If you can update from master, this fix should fix your issue.
https://github.com/MrPlusGH/NPlusMiner/issues/17
Would appreciate if you can confirm.
Thank you
master. The result is the same.
https://reho.st/self/f2ad4f55ab9202fd4742f04a8aa41737f348496d.jpg
It seems that the problem is only for my rig on win7.
Rig N2 on Win10 works correctly.
Thank you
February 20, 2018, 02:15:12 PM
Well, the PS script crashed just after attempting to load miners. Here are the last few lines from the miner.log:
I did not press Ctrl-C, even though that is what it looks like. I did type in 'exit' when I noticed it was sitting at the PS command prompt.
EDIT - I should also note that ccminer-polytimos was still plugging away on X17, so this wasn't a fatal error.
Code:
--------------------------------------------------------------------------------
Last Refresh: 02/18/2018 05:55:16
Sleep 240 sec
--------------------------------------------------------------------------------
Stats ' X17 ' -> 41.68 MH after 27243 sec
--------------------------------------------------------------------------------
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Loading miners..
PS>TerminatingError(): "The pipeline has been stopped."
>> TerminatingError(): "The pipeline has been stopped."
PS C:\Users\ONDA-1\Desktop\Mining\NPlusMiner-1.2.1> exit
**********************
Windows PowerShell transcript end
End time: 20180218060008
**********************
I did not press Ctrl-C, even though that is what it looks like. I did type in 'exit' when I noticed it was sitting at the PS command prompt.
EDIT - I should also note that ccminer-polytimos was still plugging away on X17, so this wasn't a fatal error.
Did you sort this one out?
Nope. I was rather hoping you could help me here, rather than the other way around...
Could you try 1.3 from master?
February 20, 2018, 02:10:00 PM
Well, the PS script crashed just after attempting to load miners. Here are the last few lines from the miner.log:
I did not press Ctrl-C, even though that is what it looks like. I did type in 'exit' when I noticed it was sitting at the PS command prompt.
EDIT - I should also note that ccminer-polytimos was still plugging away on X17, so this wasn't a fatal error.
Code:
--------------------------------------------------------------------------------
Last Refresh: 02/18/2018 05:55:16
Sleep 240 sec
--------------------------------------------------------------------------------
Stats ' X17 ' -> 41.68 MH after 27243 sec
--------------------------------------------------------------------------------
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Loading miners..
PS>TerminatingError(): "The pipeline has been stopped."
>> TerminatingError(): "The pipeline has been stopped."
PS C:\Users\ONDA-1\Desktop\Mining\NPlusMiner-1.2.1> exit
**********************
Windows PowerShell transcript end
End time: 20180218060008
**********************
I did not press Ctrl-C, even though that is what it looks like. I did type in 'exit' when I noticed it was sitting at the PS command prompt.
EDIT - I should also note that ccminer-polytimos was still plugging away on X17, so this wasn't a fatal error.
Did you sort this one out?
Nope. I was rather hoping you could help me here, rather than the other way around...
Jump to: