Mine looked good until stopped, then they would not connect. Maybe they were mining to the right place, but they all stopped when I rebooted the internet connection.
I have about the same on via as you do.
Time to look at trezors....
Topic: Number 9! Ninth altcoin thread. Back to the moon Baby! - page 5. (Read 66461 times)
All my units are running according to simplemining.
and the site kind of works.
between my eth ltc/doge and btc I have over 5k in coin there.
I am on the road for thanksgiving so I cant really dig into the gear until just about 12 hours from now.
I am scheduled to withdraw 0.07 btc tonight which is most of the coin hope it works.
BTW not that I want to lose 5-6k but this year has been good I could lose it and survive.
Happy thanksgiving 🦃 everyone.
and the site kind of works.
between my eth ltc/doge and btc I have over 5k in coin there.
I am on the road for thanksgiving so I cant really dig into the gear until just about 12 hours from now.
I am scheduled to withdraw 0.07 btc tonight which is most of the coin hope it works.
BTW not that I want to lose 5-6k but this year has been good I could lose it and survive.
Happy thanksgiving 🦃 everyone.
Miners look to be running, but when I stop and restart, they all say 'can't resolve host etherium.viabtc.com'
Tried isitdown on my phone, not tied to my home pc's, isitdown says that viabtc is down, but the website does pull up
The fun of mining.
Switching back to nicehash, i left them because of their pissing match with phoenixminer.
Half the machines wont start, i need the latest nicehash to proceed
[moderator's note: consecutive posts merged]
Tried isitdown on my phone, not tied to my home pc's, isitdown says that viabtc is down, but the website does pull up
The fun of mining.
Switching back to nicehash, i left them because of their pissing match with phoenixminer.
Half the machines wont start, i need the latest nicehash to proceed
[moderator's note: consecutive posts merged]
Wierd. I am using Viabtc.com. I tried a couple of websites like isitdown.com, and they both say it is down.
after checking it multiple times it is having issues but not fully down or up.
maybe a major dds attack
Wierd. I am using Viabtc.com. I tried a couple of websites like isitdown.com, and they both say it is down.
I have a lot of money there. Let me check it out .
May be you I logged in and I am all good.
May be you I logged in and I am all good.
I'm mining with ViaBTC.com, looks like the website is down, mining continues. Twitter says nothing. Anyone else using ViaBTC?
Websites down scare me.
Websites down scare me.
I will use plywood drill a few holes in the plywood and these spacers
https://www.amazon.com/dp/B071DF6ST4?ref=nb_sb_ss_w_as-ypp-rep_ypp_rep_k0_1_15&crid=3UVVXW61BE1JA&sprefix=plastic+spacers
This will help cool off the mobo
I will mount a few of these fans
https://www.newegg.com/corsair-co-9050050-ww-case-fan/p/N82E16835181205?
the key is the have the fan set to blow air above and under the mobo.
F >>_______________ >>>>
A >>
N
This would keep mobo pcb cool and the cards
https://www.amazon.com/dp/B071DF6ST4?ref=nb_sb_ss_w_as-ypp-rep_ypp_rep_k0_1_15&crid=3UVVXW61BE1JA&sprefix=plastic+spacers
This will help cool off the mobo
I will mount a few of these fans
https://www.newegg.com/corsair-co-9050050-ww-case-fan/p/N82E16835181205?
the key is the have the fan set to blow air above and under the mobo.
F >>_______________ >>>>
A >>
N
This would keep mobo pcb cool and the cards
yes.. i have about a 1/2 inch of space under my onda d8p and have a row of 120s that blow under as well as over the mobo. it does help. mobo stays barely above room temp now (vs when there was only less than 1/4 inch space and barely any airflow under the mobo).
202 days is pretty good!.
Ill be interested to see if you get that motherboard to hash all 8 slots with no problems, I have only 1 rig running 5 cards.
(main problem is not having 5 cards of the same type to run in a rig).
Ill be interested to see if you get that motherboard to hash all 8 slots with no problems, I have only 1 rig running 5 cards.
(main problem is not having 5 cards of the same type to run in a rig).
Yeah I will test with 7 and 8
I am pretty sure it will do 8 with simplemining os.
My fear is all the power runs in the slots which is why I may restrict to 7 cards
I will use plywood drill a few holes in the plywood and these spacers
https://www.amazon.com/dp/B071DF6ST4?ref=nb_sb_ss_w_as-ypp-rep_ypp_rep_k0_1_15&crid=3UVVXW61BE1JA&sprefix=plastic+spacers
This will help cool off the mobo
I will mount a few of these fans
https://www.newegg.com/corsair-co-9050050-ww-case-fan/p/N82E16835181205?
the key is the have the fan set to blow air above and under the mobo.
F >>_______________ >>>>
A >>
N
This would keep mobo pcb cool and the cards
Last week i 'won' a newegg for a 3090, they stuck me with a motherboard...
In a moment of weakness i bought it.
I did not notice the WB on the part number until I opened the package.
No wonder I 'won', it has an attached waterblock........... crap.
Then I decided to go with it and found a Bitspower touchaqua diy kit on clearance for $174 at Titanrig.
It arrives today. Should be interesting as I have not done water before.
I'll try to take some pictures as I build it.
I think the newegg combo was like $2950, plus the $174 all for 120 hash.
I'll be 90 before it pays back!
In a moment of weakness i bought it.
I did not notice the WB on the part number until I opened the package.
No wonder I 'won', it has an attached waterblock........... crap.
Then I decided to go with it and found a Bitspower touchaqua diy kit on clearance for $174 at Titanrig.
It arrives today. Should be interesting as I have not done water before.
I'll try to take some pictures as I build it.
I think the newegg combo was like $2950, plus the $174 all for 120 hash.
I'll be 90 before it pays back!
202 days is pretty good!.
Ill be interested to see if you get that motherboard to hash all 8 slots with no problems, I have only 1 rig running 5 cards.
(main problem is not having 5 cards of the same type to run in a rig).
Ill be interested to see if you get that motherboard to hash all 8 slots with no problems, I have only 1 rig running 5 cards.
(main problem is not having 5 cards of the same type to run in a rig).
41 hash, 70 watts, no power connectors, tiny, a little more than half the price of a 3090 (3 cards for same hash rate) and no limiting?
Sounds amazing.
Sounds amazing.
Yeah We really hope it lives up to the you tube videos.
I grabbed these boards.
https://www.ebay.com/itm/384476890212?
and these psu's
https://www.newegg.com/corsair-rmx-white-series-rm850x-white-cp-9020188-na-850w/p/N82E16817139247?
So 7 x 70 = 490 watts a rig and 40 more you go to 540 watts
build cost me 7 x 560 =
3920 gpus
+ 160 board
+ 118 psu
+ 20. ram
4218 and say 22 for wood and screws.
4240
does 288 hash
burns 540 watts my power cost in house is 1.69 a day. it earns 23 a day net of 21 or so.
21 x 202 = 4242
202 day pay off.
41 hash, 70 watts, no power connectors, tiny, less than the price of a 3090 (3 cards for same hash rate) and no limiting?
Sounds amazing.
Sounds amazing.
Have an issue with one of the miner dude rigs.
I will need to check on it won't boot.
Been too busy.
We are waiting on 38 rtx a2000 cards.
Note the link below is not my source
https://www.bhphotovideo.com/c/product/1664767-REG/pny_technologies_vcnrtxa2000_pb_rtx_a2000_graphic_card.html
I paid about 100 less than B+H wants.
https://www.youtube.com/watch?v=GK-s1HhbK20
https://www.youtube.com/watch?v=AzTgrR1ug4U
https://www.youtube.com/watch?v=Lh6QE08m5QQ
hope they do 41mh at 70 watts
I will need to check on it won't boot.
Been too busy.
We are waiting on 38 rtx a2000 cards.
Note the link below is not my source
https://www.bhphotovideo.com/c/product/1664767-REG/pny_technologies_vcnrtxa2000_pb_rtx_a2000_graphic_card.html
I paid about 100 less than B+H wants.
https://www.youtube.com/watch?v=GK-s1HhbK20
https://www.youtube.com/watch?v=AzTgrR1ug4U
https://www.youtube.com/watch?v=Lh6QE08m5QQ
hope they do 41mh at 70 watts
RTX A2000 card,
These are very easy, no messing with power limits, volts, etc.
12 X these = 480MH = 840W
(I have only one but maybe with those monster cases)
Just put memory as high it goes and enjoy, 70W is the limit anyway :-)
(HIVEOS & TBM 1.21)
01:00.0
RTX A2000 5940 MB · NVIDIA
Samsung GDDR6 · 94.06.2C.00.01 · PL 10 W, 70 W, 70 W
41.62 MH 67° 65% 68 W 65 0 2400
These are very easy, no messing with power limits, volts, etc.
12 X these = 480MH = 840W
(I have only one but maybe with those monster cases)
Just put memory as high it goes and enjoy, 70W is the limit anyway :-)
(HIVEOS & TBM 1.21)
01:00.0
RTX A2000 5940 MB · NVIDIA
Samsung GDDR6 · 94.06.2C.00.01 · PL 10 W, 70 W, 70 W
41.62 MH 67° 65% 68 W 65 0 2400
Yeah they seem to be in Europe.
I would love to get 10-20 of them here in the usa.
I have a ton (4) of miner dude cases with 12x A4000
work well.
but I want some with 12 a2000.
I am now pushing 7gh for eth
this is showing 6 of the 7 miner dude rigs
this is about 58 gpus in 6 rigs.
the 7th one has 8 cards so we have 66 card and 4.6gh in those 7 rigs.
RTX A2000 card,
These are very easy, no messing with power limits, volts, etc.
12 X these = 480MH = 840W
(I have only one but maybe with those monster cases)
Just put memory as high it goes and enjoy, 70W is the limit anyway :-)
(HIVEOS & TBM 1.21)
01:00.0
RTX A2000 5940 MB · NVIDIA
Samsung GDDR6 · 94.06.2C.00.01 · PL 10 W, 70 W, 70 W
41.62 MH 67° 65% 68 W 65 0 2400
These are very easy, no messing with power limits, volts, etc.
12 X these = 480MH = 840W
(I have only one but maybe with those monster cases)
Just put memory as high it goes and enjoy, 70W is the limit anyway :-)
(HIVEOS & TBM 1.21)
01:00.0
RTX A2000 5940 MB · NVIDIA
Samsung GDDR6 · 94.06.2C.00.01 · PL 10 W, 70 W, 70 W
41.62 MH 67° 65% 68 W 65 0 2400
Yeah they seem to be in Europe.
I would love to get 10-20 of them here in the usa.
I have a ton (4) of miner dude cases with 12x A4000
work well.
but I want some with 12 a2000.
I am now pushing 7gh for eth
RTX A2000 card,
These are very easy, no messing with power limits, volts, etc.
12 X these = 480MH = 840W
(I have only one but maybe with those monster cases)
Just put memory as high it goes and enjoy, 70W is the limit anyway :-)
(HIVEOS & TBM 1.21)
01:00.0
RTX A2000 5940 MB · NVIDIA
Samsung GDDR6 · 94.06.2C.00.01 · PL 10 W, 70 W, 70 W
41.62 MH 67° 65% 68 W 65 0 2400
These are very easy, no messing with power limits, volts, etc.
12 X these = 480MH = 840W
(I have only one but maybe with those monster cases)
Just put memory as high it goes and enjoy, 70W is the limit anyway :-)
(HIVEOS & TBM 1.21)
01:00.0
RTX A2000 5940 MB · NVIDIA
Samsung GDDR6 · 94.06.2C.00.01 · PL 10 W, 70 W, 70 W
41.62 MH 67° 65% 68 W 65 0 2400
@crazydane
You have auto-exchange on to BTC? Looks like it would take forever to get payment. Maybe change it to LTC? Just a thought
You have auto-exchange on to BTC? Looks like it would take forever to get payment. Maybe change it to LTC? Just a thought
Just got my first payment:
So 15 days for a little over $90 on a 5800 and 5950X. Not bad at all!
Maybe Sunday I get my
3960
3970
3900
going
@crazydane
You have auto-exchange on to BTC? Looks like it would take forever to get payment. Maybe change it to LTC? Just a thought
You have auto-exchange on to BTC? Looks like it would take forever to get payment. Maybe change it to LTC? Just a thought
Just got my first payment:
So 15 days for a little over $90 on a 5800 and 5950X. Not bad at all!
A dozen is pretty good I got 3.
Hey I got a decent price on 2x 6700xt
and they crash on Phoenix 5.4 ,5.6 ,5.7 with smos
anyone have a way to run amd 6700 xt using smos for eth of Course
Did you get them running? did you try lolminer?
Just waiting for new 6600, should be quite efficient, got it for 400$.
Also did you get your CPU to mine raptoreum?
running around hard at the moment.
I got a w6600 and a 6700 xt to work on smos
https://www.bestbuy.com/site/xfx-speedster-qick319-amd-radeon-rx-6700-xt-12gb-gddr6-pci-express-4-0-gaming-graphics-card-black/6460664.p? I paid 700 for this
https://www.newegg.com/amd-100-506208/p/N82E16814105106? I paid 675 for this
cleaning and combing posts
Not really a sharer, but why not.
Removed the fans from a S9 and tested it with an inline duct fan, with reduced speed.
It is very very tolerable, i could say silent but not bedroom silent, definitely kitchen/TV room plausible!
Miner is underclocked at 8.6V/550mhz/1000W
http://prntscr.com/1s6mphw
Removed the fans from a S9 and tested it with an inline duct fan, with reduced speed.
It is very very tolerable, i could say silent but not bedroom silent, definitely kitchen/TV room plausible!
Miner is underclocked at 8.6V/550mhz/1000W
http://prntscr.com/1s6mphw
My reply to this was deleted.
It was " nice simple idea"
Sorry that I was not verbose enough to keep my post according to the mods.
I suspect it was a bot and a perfectly accurate 3 word response designed to get people to look at your screen shot idea was deleted.
So here is a longer answer. along with the image you linked to.
As I said "nice simple idea"
Jump to: