Topic: Number 9! Ninth altcoin thread. Back to the moon Baby! - page 7. (Read 66461 times)

Phil,

I updated my post with a link to a spreadsheet tracking different cpu performance https://docs.google.com/spreadsheets/d/1ABYpRGBEOg_OcMdhspS1DfklVjetuUhGca_s3H3gjRI/edit#gid=609370861

well take while you can 5 a day for 1 cpu is really good.

I do suggest 50-50 or 60-40 or 40-60

as your sell to hodl numbers.

any of them are more then fully selling off monero would be and the hodl could pull a doge down the road.

Phil,

This algo is crazy - that was my top but it constantly goes from 3 to 5 to 9 etc.  Average from my pool graph is 5-6.  It's a 5950x 32 core.

This spreadsheet tracks different cpu performance https://docs.google.com/spreadsheets/d/1ABYpRGBEOg_OcMdhspS1DfklVjetuUhGca_s3H3gjRI/edit#gid=609370861

After one day I made roughly $5.10 and thats with an 18.7% drop in RTM.   I have 534 RTM

For those new to this:

I am running HiveOS: - this video was helpful https://youtu.be/TtqJ3Z1cpuY.  
I used the settings in the video - i haven't done any motherboard bios tweaks which it doesn't cover.  No over or underclocking/volting.

Miner:  cpuminer-opt-gr
User config - threads 30, tune-full, donation:0 (just sets it to the lowest setting). Set it to 2 threads less than your max threads

Pool: - R-Pool.net - note there is no account needed - you just start getting paid, I can't figure it out the frequency it might be every 10 coins but I have some payments of 40+ coins

P.S. - For some unknown reason the wallet took forever to open today - I thought it was corrupted or something, opened it, went to walk the dogs, and when I got back everything was fine, but it was minutes to open.  Note this was the windows wallet - the mac one doesn't appear t work - tried that first.

That did it! Thanks.

so you get 9.8 gh on a 5950?

how much is that worth?

my 3970 and 3960 would do more

maybe 16.0 and 12.0

i have no access to the cpu gear till sat.

i also have 2 x 3900x rigs.

seems like i can get to 40.0 gh for the 4 rigs.

Maybe this guide helps -> look that download link in that page for miner

https://rtm.suprnova.cc/index.php?page=gettingstarted

How are you running this? Downloaded Cpu miner from JayDDee but it keeps giving the error "unknown algo: gr"
My command line on my bat file:
cpuminer-zen3 -a gr -o stratum+tcp://r-pool.net:3008  -u my_adress.ATestUser

EDIT: https://prnt.sc/1u0zmpn

I'll restart it later and check. Thanks

Sorry running in windows but there should be huge pages also in linux.
When you started the miner did it say "Huge pages set up successfully"?

Huge pages?  Is that a windows thing?  This is on hiveos linux - just fulltune.  Its a 5950x.

Is this TR 3970X?

Huge pages on and fulltune done?

Looks nice

Is this good for a hashrate?

In your dreams the 3960 make 4,5 a day. This cpu can give you around 20000 hashes per second on randomx and this give you maybe 1.2$

Mining verus or raptoreum give much more.

Any preferred pools for RTM?

@alucard20724

Ok, thanks 4 help. I will test that.

Sorry to give little bit too high expectations. But should be better than anything else now on cpu.
Of course difficulty is rocketing, se lets  hope it lasts at 4 awhile so you get at least something

so more than $2.50 a day in ltc for a 3950

I have a 3960 and a 3970 I am away from the rigs but they do a lot more than the 3950  when it comes to xmr

I would guess they will do 4.50 and 5.50 = 10 bucks a day.

 I can not get to them until sat.

This would be nice if it lasts a while

I also think I have an idle pair of  3900,s thy could do 2+2 = 4

so maybe 14 a day and burn 1kwatt or less which is about 3 a day in power a net  of 11 bucks a day.

I need to wait till sat to do it. mean while the eth gear is still making coin as is the l3 gear and the sha 256

we expanded our ready power by 8x 30 amp 240 volts  we will add multiple 12 card minerdude servers a total of 4 holding a lot of 3090's and a4000's

each rig pulls close to 1900 watts which means an easy pair on each circuit I think we are past 5gh in eth.

5x a4000 cards on the way
1x 3080 fe
1x 3090

that is about 380 mh more.

For us it is about expansion slowly but surely.

We have a lot of power not tapped

500kwatts in one place at 4 cents not in use

and 35kwatts at 2 cents ready willing and able . plus it can go to 100kwatt more.

the 2 cent spot can do 40 minderdude cases with 5x a4000 and 4x 3090 cards hashing at about 730 mh each.

it is more a question of gear getting adding at the right speed than anything else.
This place should hold a lot more gear by next year.

I will show more minerdude builds soon

i use zergpool and zpool

yes.. I get paid in LTC
it's listed on the main page https://zergpool.com/

BTC payouts are made automatically every 24h for all balances above 0.0015 every day, or if network fees are low enough payments are sent more frequently(every 4h).
ETH payouts are made automatically every 4 hours for all balances above 0.05, transaction fee is deducted from balance.
USDT(ERC20) payouts are made automatically every 4 hours for all balances above 100, transaction fee is deducted from balance.
LTC payouts are made automatically every 4 hours for all balances above 0.25, or 0.05 on Sunday.
DOGE payouts are made automatically every 4 hours for all balances above 50, or 10 on Sunday.
Payouts for all other currencies are made automatically every 4 hours for all balances above 0.0001 in BTC equivalent, or 0.00002 on Sunday.
BTC, BCH, LTC, DOGE, ETH, USDT(ERC20) and DASH are guaranteed payout coins, for others please check block amount we mine in pool.

there's a command line generator that you can use to help



in the password field is where you would put coin payout.  just make sure you have the correct address in the wallet.
i.e.
-p c=LTC
or
-P c=BTC

@alucard20724

You use Zergpool for mining RTM, right?
can you get paid in other coins like BTC, ETH or LTC?

didn't really understand that, payout limists looked quite high for everything else than LTC

nope... i'm good.. calculations are correct.  I use weighted pools.

Your hashrate is quite low for 3950X, You can check these benchmarks

https://docs.google.com/spreadsheets/d/1ABYpRGBEOg_OcMdhspS1DfklVjetuUhGca_s3H3gjRI/edit#gid=609370861

and maybe https://minerstat.com/coin/RTM , by looking your stats, minerstats calculator might be not be right