Pages:
Author

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 16. (Read 5805299 times)

newbie
Activity: 28
Merit: 0
thank you bro. ill try to install and use it my windows 10 pc. hopping that i can mine bitcoin on my own. how much bitcoin in can mine in  a day 24hrs? im planning to buy also a spare pc just for mining and then using a jumper for the electricity.
member
Activity: 70
Merit: 10
Thank you for that information.

I'm getting this error when I try that.
cgminer: --icarus-timing=short: unrecognized option.

I tried to download from here http://ck.kolivas.org/apps/cgminer/ but it flagged as malware, can anyone confirm this is the correct link? the 4.10 version?
It's the correct link and definitely not malware. The icarus timing feature is irrelevant today and you shouldn't be using it.

Thanks, I've now tried with and without the icarus command, it seems to make no difference.

What I can't understand now is why the speed is still at 336Mh/s regardless of the speed figure, I tried 200 and 225, I believe I should be getting 1.6 and 1.8Gh/s at those settings.
It's seeing it inappropriately as an asicminer usb stick which did 336. Try a powered hub, pull it out and put it back in a few times and see if it initialises differently.

Looking at pictures in google, I believe I have an asicminer USB. I thought these were U1. Thanks for the clarification.
1Gh/s between the 3 of them.
$0.03 a month Smiley
I wonder, what others crypto will this run? Just sha256? Just bitcoin?
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Thank you for that information.

I'm getting this error when I try that.
cgminer: --icarus-timing=short: unrecognized option.

I tried to download from here http://ck.kolivas.org/apps/cgminer/ but it flagged as malware, can anyone confirm this is the correct link? the 4.10 version?
It's the correct link and definitely not malware. The icarus timing feature is irrelevant today and you shouldn't be using it.

Thanks, I've now tried with and without the icarus command, it seems to make no difference.

What I can't understand now is why the speed is still at 336Mh/s regardless of the speed figure, I tried 200 and 225, I believe I should be getting 1.6 and 1.8Gh/s at those settings.
It's seeing it inappropriately as an asicminer usb stick which did 336. Try a powered hub, pull it out and put it back in a few times and see if it initialises differently.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
i m running cgminer with 5 gridseed asic usb miners on a raspberry
There is no gridseed nor altcoin support in the official cgminer so you must be running an unofficial fork of cgminer which means you need to seek support from them.
member
Activity: 70
Merit: 10
Thank you for that information.

I'm getting this error when I try that.
cgminer: --icarus-timing=short: unrecognized option.

I tried to download from here http://ck.kolivas.org/apps/cgminer/ but it flagged as malware, can anyone confirm this is the correct link? the 4.10 version?
It's the correct link and definitely not malware. The icarus timing feature is irrelevant today and you shouldn't be using it.

Thanks, I've now tried with and without the icarus command, it seems to make no difference.

What I can't understand now is why the speed is still at 336Mh/s regardless of the speed figure, I tried 200 and 225, I believe I should be getting 1.6 and 1.8Gh/s at those settings.
newbie
Activity: 6
Merit: 0
newbie here.
i m running cgminer with 5 gridseed asic usb miners on a raspberry
the raspberry can recognize all my 5 miners but the fifth one doesn't look like accepting any mining task?
if u see below, the A , R , HW, and WU are all zero on GSD4 miner.
any one know what the issue is and how can i fix it
any suggestion is much appreciated  Huh

 [P]ool management ettings [D]isplay options [Q]uit
 GSD 0: 6D9133704857  850 MHz | 360.4K/360.9Kh/s | A:3840 R:0 HW:0 WU:3.9/m
 GSD 1: 6D6E23704857  850 MHz | 360.4K/360.8Kh/s | A:5184 R:0 HW:0 WU:4.4/m
 GSD 2: 6D7A268C4857  850 MHz | 360.4K/361.4Kh/s | A:3712 R:0 HW:0 WU:3.8/m
 GSD 3: 6D99149D5455  850 MHz | 360.4K/361.3Kh/s | A:5760 R:0 HW:5 WU:3.9/m
 GSD 4: 6D9315AA5455  850 MHz | 360.4K/361.3Kh/s | A:   0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------

 [2017-06-12 11:57:14] Accepted d5824bc7 Diff 307/64 GSD 1
 [2017-06-12 11:57:19] Accepted 0321148d Diff 82/64 GSD 0
 [2017-06-12 11:57:21] Accepted 010cf60a Diff 244/64 GSD 3
 [2017-06-12 11:57:23] Stratum from pool 0 requested work restart
 [2017-06-12 11:57:27] Accepted 01b2d2ca Diff 151/64 GSD 1
 [2017-06-12 11:57:29] Accepted 031338bc Diff 83/64 GSD 2
 [2017-06-12 11:57:29] Accepted 083b281c Diff 7.96K/64 GSD 3
 [2017-06-12 11:57:29] Accepted 039ed61c Diff 71/64 GSD 1
 [2017-06-12 11:57:29] Accepted 013212bd Diff 214/64 GSD 2

thank you
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Thank you for that information.

I'm getting this error when I try that.
cgminer: --icarus-timing=short: unrecognized option.

I tried to download from here http://ck.kolivas.org/apps/cgminer/ but it flagged as malware, can anyone confirm this is the correct link? the 4.10 version?
It's the correct link and definitely not malware. The icarus timing feature is irrelevant today and you shouldn't be using it.
member
Activity: 70
Merit: 10
Thank you for that information.

I'm getting this error when I try that.
cgminer: --icarus-timing=short: unrecognized option.

I tried to download from here http://ck.kolivas.org/apps/cgminer/ but it flagged as malware, can anyone confirm this is the correct link? the 4.10 version?
legendary
Activity: 1045
Merit: 1157
no degradation
...
I got awesome miner which loads cgminer for my asic, but I believe I Should be getting 1600mh or more but I'm getting 300, I'm guessing I need to add in the --bmsc-freq 0781 command somewhere but I can't work out where to add it in awesome miner.
...

Win 10 U1

You'll need this option. Start cgminer with:

Code:
cgminer -o stratum+tcp://your_pool.com:port -u username -p password --icarus-timing=short --anu-freq 200

You will find a frequency table here on pages 4 and 5 (ignore the first pages, they are outdated). 200 will run your U1 at 1.6 GHash/s, 250 with 2.0 GHash/s etc. There is no need to bother with frequency hex values when using the latest cgminer. Smiley

Not sure how to set the option within the 3rd party software you mentioned (Awesome Miner), however it is not needed. The U1 should work with plain cgminer on a Windows machine (just install the WinUSB driver as mentioned here or follow "Step 3" and "Step 4" from the outdated guide linked above).
member
Activity: 70
Merit: 10
I'm scratching my head a little here I wonder if anyone can help?

I got a couple of USB miners to tinker around and get my head around things before I invest more.

What USB Miner do you have?  What Operating System are you using?

Win 10 U1
legendary
Activity: 3578
Merit: 1090
Think for yourself
I'm scratching my head a little here I wonder if anyone can help?

I got a couple of USB miners to tinker around and get my head around things before I invest more.

What USB Miner do you have?  What Operating System are you using?
member
Activity: 70
Merit: 10
I'm scratching my head a little here I wonder if anyone can help?

I got a couple of USB miners to tinker around and get my head around things before I invest more.

I got awesome miner which loads cgminer for my asic, but I believe I Should be getting 1600mh or more but I'm getting 300, I'm guessing I need to add in the --bmsc-freq 0781 command somewhere but I can't work out where to add it in awesome miner.

Any help appreciated, thanks.
newbie
Activity: 32
Merit: 0
If anyone is interested in this, I've just built cgminer 4.10.0 for the Bitmain Antminer S3.

- Based on the latest cgminer 4.10.0 from git
- Statically linked with the latest libcurl 7.54
- Built with gcc 5.3.0

Hashes just fine on my unit so far.

Download link: https://yadi.sk/d/CVhgXxmN3K2SBw
legendary
Activity: 3578
Merit: 1090
Think for yourself
I am trying to look for a good miner application or tool that I can use to earn bit coin.

What Bitcoin mining application you need to use will depend, somewhat, on which Bitcoin Miner you have.

So, what ASIC mining hardware do you have?
member
Activity: 68
Merit: 10
I am trying to look for a good miner application or tool that I can use to earn bit coin. Right now I am using prominer and it is actually hard to earn bit coin and you will be needing at least 0.005 before you withdraw the coin. So I'm gonna keep reading forums and feedback which one will be able to help me earn money. Because with the prominer I dont have to invest money it's an app that I can use and just leave it. Prominer will be on his on mining bitcoins.
newbie
Activity: 32
Merit: 0
I still run a couple of Antminer S3's with cgminer 4.9.2. I would like to upgrade them to 4.9.10, but unable to find a precompiled binary for this Atheros MIPS-based platform. Did anybody already do this?
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
What is the get apt command for Linux (ubuntu) for installation?

 I used the following command: apt-get install cgminer and it downloaded version 4.9.2 I see a version 4.10.0 on the Git site however.
That is the correct apt command but it's up to the linux distribution to be up to date or not.
member
Activity: 61
Merit: 10
newbie
Activity: 12
Merit: 0
What is the get apt command for Linux (ubuntu) for installation?

 I used the following command: apt-get install cgminer and it downloaded version 4.9.2 I see a version 4.10.0 on the Git site however.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Dear -ck,

I cloned the cgminer-repository onto my Raspberry Pi and tried to compile it using the make-command. But it says that the Makefile would be missing.
I then renamed "Makefile.am" to "Makefile". It now says I'd be using spaces instead of tabs.
I had a look at the makefile and it seems to be ok (no spaces).
Do you have any idea for me to get it work?

Yours sincerely
DrakonX
Read the readme please. You do not do what you're doing...
./autogen.sh if building from git
etc...
Pages:
Jump to: