Author

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 577. (Read 5805728 times)

legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Go visit the ABCPool thread - ABCPool was dead last time I looked there a couple of hours ago.
Edit: OK someone posted that it's alive again (but it was dead for quite a while)
hero member
Activity: 868
Merit: 1000
Ckolivas,

As you know I am mining on Bonuspool, last night the pool was disabled by CGMiner after 3 mins of rejects and although it came back to  live,  not all of my miners went back to work there, some did

Code:
 cgminer version 2.4.1 - Started: [2012-05-06 15:22:54]
--------------------------------------------------------------------------------
 (5s):320.5 (avg):319.4 Mh/s | Q:38171  A:22639  R:849  HW:35  E:59%  U:4.3/m
 TQ: 2  ST: 6  SS: 181  DW: 5934  NB: 638  LW: 55164  GF: 84  RF: 215
 Connected to http://pit.deepbit.net:8332 with LP as user XXXX
 Block: 00000022fe8262b5f692521c7ada0720...  Started: [07:50:39]
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  73.0C 2483RPM | 321.5/319.4Mh/s | A:22639 R:849 HW:35 U: 4.26/m I: 6
--------------------------------------------------------------------------------

0: Rejecting Alive Priority 0: http://pool.bonuspool.co.cc:80  User:XXXX
1: Enabled Dead Priority 1: http://pool.ABCPool.co:8332  User:XXX
2: Enabled Alive Priority 2: http://pit.deepbit.net:8332  User:XXX
3: Enabled Alive Priority 3: http://mine.btcguild.com:8332  User:XXX

Current pool management strategy: Failover
[A]dd pool [R]emove pool [D]isable pool [E]nable pool
[C]hange management strategy [S]witch pool [I]nformation
Or press any other key to continue


As you can see, it is still rejecting

Cheers,

Brat

p.s. Just by sheer luck I happen to see that on one of my other miners where Pool  0 also was not re-enabled, Pool 1, which is enabled but DEAD as you can see above, came back alive and that miner switched to Pool 1 immediately.... but Pool 0 stayed in Rejecting mode. After enabling it manually, the miners started delivering shares
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
the HW column which I believe stands for hardware error.

One of my cards has 0 while the other has 2.5% hardware errors ( HW/(A+R+HW)= hardwareerror divided by total accepted+rejected+HW. )

Should I downclock that card some because I think those errors are because of overclock?
If the rate is very low, then leaving it is fine. However 2.5% is fairly significant. Think of them like the glitches you see on screen when you overclock too much. I'd recommend just come backing a little on the overclock till they go away.
full member
Activity: 154
Merit: 100
the HW column which I believe stands for hardware error.

One of my cards has 0 while the other has 2.5% hardware errors ( HW/(A+R+HW)= hardwareerror divided by total accepted+rejected+HW. )

Should I downclock that card some because I think those errors are because of overclock?
newbie
Activity: 58
Merit: 0
Heh, looks like I packed that rig tightly just to unpack it again.

Ok, going to unpack it.

p.s. I use no extensions and no displays, just resistors.
newbie
Activity: 58
Merit: 0
Hi All,

I'm trying to run my 4-GPU rig and having something strange.

It runs perfectly with 3 GPUs, but when the 4th is being added it still runs only those 3 were running before.

winxp32, driver 11.11, cgminer 2.4.1

Here are some logs:

C:\ATI\04>cgminer.exe -n
 [2012-05-09 16:48:35] CL Platform 0 vendor: Advanced Micro Devices, Inc.
 [2012-05-09 16:48:35] CL Platform 0 name: AMD Accelerated Parallel Processing
 [2012-05-09 16:48:35] CL Platform 0 version: OpenCL 1.1 AMD-APP (831.4)
 [2012-05-09 16:48:35] Platform 0 devices: 4
 [2012-05-09 16:48:35]  0       Juniper
 [2012-05-09 16:48:35]  1       Juniper
 [2012-05-09 16:48:35]  2       Juniper
 [2012-05-09 16:48:35]  3       Cayman
 [2012-05-09 16:48:35] GPU 0 AMD Radeon HD 6900 Series  hardware monitoring enabled
 [2012-05-09 16:48:35] GPU 1 ATI Radeon HD 5700 Series hardware monitoring enabled
 [2012-05-09 16:48:35] GPU 2 AMD Radeon HD 6700 Series hardware monitoring enabled
 [2012-05-09 16:48:35] GPU 3 ATI Radeon HD 5700 Series hardware monitoring enabled
 [2012-05-09 16:48:35] 4 GPU devices max detected

So the 4nd GPU (AMD Radeon HD 6900 Series Cayman) is seen by both CL and ADL.


 cgminer version 2.4.1 - Started: [2012-05-09 16:36:00]
--------------------------------------------------------------------------------
 (5s):540.2 (avg):542.9 Mh/s | Q:26  A:5  R:0  HW:0  E:19%  U:10.8/m
 TQ: 8  ST: 8  SS: 0  DW: 15  NB: 2  LW: 16  GF: 0  RF: 0
 Connected to http://mining.eligius.st:8337 with LP as user 12pvJujLTCtUnJB5J9Ap4qUe6gthKy2TcG
 Block: 00000146cca09914093f182831cf3d76...  Started: [16:36:15]
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [ S]ettings [D]isplay options [Q]uit
 GPU 0:  42.0C  50%    | 187.1/221.1Mh/s | A:1 R:0 HW:0 U:  2.15/m I: 7
 GPU 1:  54.0C 2007RPM | 164.7/197.0Mh/s | A:3 R:0 HW:0 U:  6.46/m I: 7
 GPU 2:  56.0C 2033RPM | 181.7/214.8Mh/s | A:1 R:0 HW:0 U:  2.15/m I: 7
 GPU 3:  58.0C  50%    |   0.0/  0.0Mh/s | A:0 R:0 HW:0 U:  0.00/m I: 7

When started cgminer runs about a minute producing shares by GPUs 0-2, then says:
...
[2012-05-09 16:37:10] Device 3 idle for more than 60 seconds, GPU 3 declared SICK!
[2012-05-09 16:37:10] GPU still showing activity suggesting a hard hang.
[2012-05-09 16:37:10] Will not attempt to auto-restart it.

This GPU had been working perfectly about a year till today as a secong GPU at my home workstation under win7x64.
Now I want it to run in a rig.
Are there any suggestions how can I diagnose that case?

Thanks in advance.
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Using 2.4.0 there seemed to be a lot of rejected, greater than 10% of accepted. I switched to 2.4.1 and now the rejected rate is less than 5% of accepted. Efficiency is 30% on average, a 50% increase over 2.3.2 with identical settings while hashing on p2pool. So far so good.
Efficiency effectively means nothing to anything but the pool and your internet connection.
Efficiency is average how many shares are accepted per getwork request to the pool.
rollntime allows a getwork request to locally be expanded into many getwork requests (max of 10 in cgminer)

On p2pool you will regularly abort your share processing due to the 10s LP time (60 times as often as on a normal pool)
When an LP hits, the current work is stopped (and any shares found are submitted, by default)
Then new work related to the LP is started.
Thus e.g. if you only process half of each work item you will return (on average) 1 share per 2 work items.
i.e. Efficiency should be something like 50%
legendary
Activity: 3583
Merit: 1094
Think for yourself
I have good temps with water and wonder how I overclock more then AMD overdrive MAX values?

I use a program called CGMiner to do that.
Sam

yes I'm using cgminer but I can't get it overclock more then the AMD Overdrive limits.

I'm on the latest 2.4.1 and windows 7 64bit.

Sorry for my somewhat sarcastic response.  I thought you were referring to the max limits that exist in the CCC program and that CG Miner can surpass.
Sam
legendary
Activity: 2702
Merit: 1468
In a few seconds after launch I have that one (win7 crash report are below):

  APPCRASH
  cgminer.exe
  0.0.0.0
  4fa657ea
  aticaldd.dll
  6.14.10.1646
  4ebb3717
  c0000005
  00156904
  6.1.7601.2.1.0.256.48



P.S. win7 x64 - Catalyst 11.12 - 2.6 sdk - 4*5870@950MHz...
:-(
  

Does it run stable @850MHz with this driver?  Try 12.2, 12.3.



full member
Activity: 196
Merit: 100
Web Dev, Db Admin, Computer Technician
Using 2.4.0 there seemed to be a lot of rejected, greater than 10% of accepted. I switched to 2.4.1 and now the rejected rate is less than 5% of accepted. Efficiency is 30% on average, a 50% increase over 2.3.2 with identical settings while hashing on p2pool. So far so good.
donator
Activity: 1218
Merit: 1079
Gerald Davis
cgminer uses the driver library to set clocks.
cgminer can't set clocks higher than drivers & GPU BIOS will allow them to be set.

If you must have higher clocks your options are limited to:
a) utilities which bypass the drivers and force GPU clock change directly (MSI AB, Trixx, etc)
b) flashing a custom BIOS which allows higher settings
full member
Activity: 154
Merit: 100
I have good temps with water and wonder how I overclock more then AMD overdrive MAX values?

I use a program called CGMiner to do that.
Sam

yes I'm using cgminer but I can't get it overclock more then the AMD Overdrive limits.

I'm on the latest 2.4.1 and windows 7 64bit.
legendary
Activity: 3583
Merit: 1094
Think for yourself
I have good temps with water and wonder how I overclock more then AMD overdrive MAX values?

I use a program called CGMiner to do that.
Sam
full member
Activity: 154
Merit: 100
I have good temps with water and wonder how I overclock more then AMD overdrive MAX values?
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Does the latest version (2.4.1) no longer support changing settings interactively via the program?

Also, I don't see temperature displays for my individual GPU's or fan speeds.

Code:
cgminer version 2.4.1 - Started: [2012-05-08 20:18:54]
--------------------------------------------------------------------------------
 (5s):1093.7 (avg):873.3 Mh/s | Q:113  A:96  R:0  HW:0  E:85%  U:14.4/m
 TQ: 4  ST: 4  SS: 0  DW: 0  NB: 1  LW: 0  GF: 0  RF: 0
 Connected to http://pit.deepbit.net:8332 with LP as user myname
 Block: 0000045ba594f8392d0fa4c53040291c...  Started: [20:18:54]
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0: 279.2/112.1Mh/s | A: 9 R:0 HW:0 U:  1.35/m I:14
 GPU 1: 292.9/251.2Mh/s | A:20 R:0 HW:0 U:  3.00/m I:14
 GPU 2: 530.0/510.0Mh/s | A:67 R:0 HW:0 U: 10.06/m I:14
--------------------------------------------------------------------------------

You still can. Nothing's changed. If you can't get temps usually you haven't export DISPLAY on linux or are running some  remote desktop on windows.
newbie
Activity: 39
Merit: 0
Does the latest version (2.4.1) no longer support changing settings interactively via the program?

Also, I don't see temperature displays for my individual GPU's or fan speeds.

Code:
cgminer version 2.4.1 - Started: [2012-05-08 20:18:54]
--------------------------------------------------------------------------------
 (5s):1093.7 (avg):873.3 Mh/s | Q:113  A:96  R:0  HW:0  E:85%  U:14.4/m
 TQ: 4  ST: 4  SS: 0  DW: 0  NB: 1  LW: 0  GF: 0  RF: 0
 Connected to http://pit.deepbit.net:8332 with LP as user myname
 Block: 0000045ba594f8392d0fa4c53040291c...  Started: [20:18:54]
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0: 279.2/112.1Mh/s | A: 9 R:0 HW:0 U:  1.35/m I:14
 GPU 1: 292.9/251.2Mh/s | A:20 R:0 HW:0 U:  3.00/m I:14
 GPU 2: 530.0/510.0Mh/s | A:67 R:0 HW:0 U: 10.06/m I:14
--------------------------------------------------------------------------------

legendary
Activity: 2026
Merit: 1005
In a few seconds after launch I have that one (win7 crash report are below):
  APPCRASH
  cgminer.exe
  0.0.0.0
  4fa657ea
  aticaldd.dll
  6.14.10.1646
  4ebb3717
  c0000005
  00156904
  6.1.7601.2.1.0.256.48

P.S. win7 x64 - Catalyst 11.12 - 2.6 sdk - 4*5870@950MHz...
:-(
Does it run stable @850MHz with this driver?  Try 12.2, 12.3.
Onle the first card crashes (0/monitor connected), another ones works well...
 
legendary
Activity: 2026
Merit: 1005
In a few seconds after launch I have that one (win7 crash report are below):

  APPCRASH
  cgminer.exe
  0.0.0.0
  4fa657ea
  aticaldd.dll
  6.14.10.1646
  4ebb3717
  c0000005
  00156904
  6.1.7601.2.1.0.256.48



P.S. win7 x64 - Catalyst 11.12 - 2.6 sdk - 4*5870@950MHz...
:-(
  
hero member
Activity: 981
Merit: 500
DIV - Your "Virtual Life" Secured and Decentralize
Sorry for the delay in replying. Thank You Kano. It did work on a restart when I removed the comma. It did take me a moment to find it. Thank You ckolivas I am glad to hear that it will be fixed. 
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
For some reason 2.4.0 and 2.4.1 will not properly save the configuration file for me. On restart after saving and having everything working I get this.
Code:
],

,
"api-port" : "4028",
It's as kano said, that extra comma is an error to do with you not running any GPUs. Will need to be fixed in the next version. You'll have to edit it manually for it to work at the moment.
Jump to: