Topic: Official Thread: AMT - page 6. (Read 678353 times)

Quote from: mellorbo on April 13, 2014, 07:56:40 AM

Quote from: loshia on April 13, 2014, 08:15:47 AM

Super,
Congrats!!!
Mell Will you be so kind to pst pool graph?

this is the one from 2 cards. i will post a 24hr one when new psu arrives monday (tomorrow)

Congrats dude
That is a working graph!
Congrats to AMT also it seems that they have at least one customer with working equipment
Just for the record what have happened in 6 am. Did you disconnect the miners ?

i believe my Ethernet cable disconnected as the clip to keep it in is broken (on the cable that is lol)

Maybe but not exactly Wink

It took about two hours for the graph to reach from 0 to max correct?
But if it was a falty cable it would take two hours also to reach zero right?
Any way from your setup I see that you know what you are doing, so when you make all three cards work,
Please shot a pool 24 hours graph again will you?
It was not the cable dude just chips which hanged.....
AMT I am taking back my congrats for you Grin

it turned out that some other graph is needed although this one seemed very ok on a first glance

i will put a 24hr graph up as soon as i have one

Thanks bro Wink

mellorbo

hero member

Activity: 620

Merit: 500

Quote from: mellorbo on April 13, 2014, 08:09:34 AM

Quote from: mellorbo on April 13, 2014, 07:56:40 AM

Quote from: mellorbo on April 13, 2014, 08:09:34 AM

Super,
Congrats!!!
Mell Will you be so kind to pst pool graph?

this is the one from 2 cards. i will post a 24hr one when new psu arrives monday (tomorrow)

Congrats dude
That is a working graph!
Congrats to AMT also it seems that they have at least one customer with working equipment
Just for the record what have happened in 6 am. Did you disconnect the miners ?

i believe my Ethernet cable disconnected as the clip to keep it in is broken (on the cable that is lol)

Maybe but not exactly Wink

It took about two hours for the graph to reach from 0 to max correct?
But if it was a falty cable it would take two hours also to reach zero right?
Any way from your setup I see that you know what you are doing, so when you make all three cards work,
Please shot a pool 24 hours graph again will you?
It was not the cable dude just chips which hanged.....
AMT I am taking back my congrats for you Grin

it turned out that some other graph is needed although this one seemed very ok on a first glance

i will put a 24hr graph up as soon as i have one

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: mellorbo on April 13, 2014, 07:56:40 AM

Super,
Congrats!!!
Mell Will you be so kind to pst pool graph?

this is the one from 2 cards. i will post a 24hr one when new psu arrives monday (tomorrow)

Congrats dude
That is a working graph!
Congrats to AMT also it seems that they have at least one customer with working equipment
Just for the record what have happened in 6 am. Did you disconnect the miners ?

i believe my Ethernet cable disconnected as the clip to keep it in is broken (on the cable that is lol)

Maybe but not exactly Wink

It took about two hours for the graph to reach from 0 to max correct?
But if it was a falty cable it would take two hours also to reach zero right?
Any way from your setup I see that you know what you are doing, so when you make all three cards work,
Please shot a pool 24 hours graph again will you?
It was not the cable dude just chips which hanged.....
AMT I am taking back my congrats for you Grin

it turned out that some other graph is needed although this one seemed very ok on a first glance

mellorbo

hero member

Activity: 620

Merit: 500

Quote from: mellorbo on April 13, 2014, 07:56:40 AM

Quote from: mellorbo on April 13, 2014, 07:56:40 AM

Super,
Congrats!!!
Mell Will you be so kind to pst pool graph?

this is the one from 2 cards. i will post a 24hr one when new psu arrives monday (tomorrow)

Congrats dude
That is a working graph!
Congrats to AMT also it seems that they have at least one customer with working equipment
Just for the record what have happened in 6 am. Did you disconnect the miners ?

i believe my Ethernet cable disconnected as the clip to keep it in is broken (on the cable that is lol)

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: opieum2 on April 13, 2014, 06:24:19 AM

Super,
Congrats!!!
Mell Will you be so kind to pst pool graph?

this is the one from 2 cards. i will post a 24hr one when new psu arrives monday (tomorrow)

Congrats dude
That is a working graph!
Congrats to AMT also it seems that they have at least one customer with working equipment
Just for the record what have happened in 6 am. Did you disconnect the miners ?
The drop in performance seems bit high and not luck related

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!

The rig AMT shipped to me. Notice how the left and right side are all bent out of shape.

Notice the power connecter on the right side is completely gone.

Notice that the some of the boards looked warped out of shape.

Notice the right most heat sink in bent out of shape. Notice the white plastic on the right.. that's the stripped out power connector.

Notice on the second to the left board, there's this black piece.... that a piece of the disintegrated fan.

Notice the paper on the right, that's what AMT considers as padding. Well it didn't help avoid having the rightmost heat sink get bent out of shape!

UNBELIEVABLE!

Tip to AMT, use bubble wrap first around the entire unit, then pack in foam peanuts or styrofoam on all eight corners.

Paper is not padding!!

loshia

legendary

Activity: 1610

Merit: 1000

Put him on ignore, his posts have been pretty useless and is just an I told you so type of post. I think by this point we all got it. His posts contribute nothing and haven't to the discussion. The ignore button just hides anything he posts from your view. Makes it easier to not have to deal with his nonsense. It certainly made it easier for me. But then seeing people reply to this asshat doesn't anyone. He will post because he can. But ignoring him he will eventually go away.

Hey are you getting nervous because of me or because your crap is still undelivered Grin

Any way as I said take some pills for the glorious moment of arrival

mellorbo

hero member

Activity: 620

Merit: 500

Quote from: FrictionlessCoin on April 13, 2014, 07:44:45 AM

Super,
Congrats!!!
Mell Will you be so kind to pst pool graph?

this is the one from 2 cards. i will post a 24hr one when new psu arrives monday (tomorrow)

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: loshia on April 13, 2014, 07:39:25 AM

Quote from: FrictionlessCoin on April 13, 2014, 07:37:12 AM

Quote from: loshia on April 13, 2014, 07:39:25 AM

This is pic of 1 of my boards that doesnt run. you can see the bent copper heat sinks and paste all over.

I don't understand the heat sink configuration here though?

Why are the heat-sinks on the A1 chips so small?

What is the bigger heat sink on the other side connected to?

Because 30 % of the heat can be disposed from one side of the chip
70% from the other
This seems to be done right
CONGRATS. AMT Grin

This is useless of course as all my other posts right?

CPU and GPUs have their heat sinks on the side of the chip and there is a conduction path from chip thermal paste to heat sink.

I don't understand this kind of a configuration, there is no conduction path from the chip through the board to the massive heat sinks.

There is the Pcb itself if done it right

loshia

legendary

Activity: 1610

Merit: 1000

Super,
Congrats!!!
Mellorbo Will you be so kind to pst pool graph?

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!

Quote from: FrictionlessCoin on April 13, 2014, 07:37:12 AM

Quote from: opieum2 on April 13, 2014, 06:50:12 AM

This is pic of 1 of my boards that doesnt run. you can see the bent copper heat sinks and paste all over.

I don't understand the heat sink configuration here though?

Why are the heat-sinks on the A1 chips so small?

What is the bigger heat sink on the other side connected to?

Because 30 % of the heat can be disposed from one side of the chip
70% from the other
This seems to be done right
CONGRATS. AMT Grin

This is useless of course as all my other posts right?

CPU and GPUs have their heat sinks on the side of the chip and there is a conduction path from chip thermal paste to heat sink.

I don't understand this kind of a configuration, there is no conduction path from the chip through the board to the massive heat sinks.

mellorbo

hero member

Activity: 620

Merit: 500

hey guys sorry for the lack of posting, been sorting this miner out. so far im still waiting for my psu to arrive as my powercool 950w bronze rated psu from my gaming rig cant cope with 3 cards it runs seriously hot but can manage 2 cards and gets warmer than expected but it ran for 14hours with a pretty steady hash of around 410ghs NOMINAL (2 out of 3 cards).
in comparison with other amt miners i have seen posted, mine/regtable's is in pretty good condition bar the 6th slot on cage is slightly bent, but operational none the less.
i have tested so far all 3 cards (2 at a time) and they all pull 204-205 ghs NOMINAL so i do believe once all 3 cards are running we should have no problem hitting the 700-750 ghs promised by amt (turbo)
alltho as you will notice by the pics i had to add a fan on the card at the end as it could do with moving down all cards in slots so the 2 stock fans cool all cards but due to 6th slot been bent just added a fan for now.
some pictures of my kit below

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!

Quote from: rik_khaos on April 13, 2014, 06:45:27 AM

Quote from: FrictionlessCoin on April 13, 2014, 07:37:12 AM

This is pic of 1 of my boards that doesnt run. you can see the bent copper heat sinks and paste all over.

Damn dude. Those are bent to shit. I only have one little prong bet. It looks like someone was kicking your box down the road.

Now hopefully the cable is the only issue with mine. once I can finally check the information about the chips and see if they are working.

If you look carefully its the compound. That happened well before it left the facility for shipping. Its all over the leads and contacts. Thats really really bad. Could be shorting the board. Bent heats-ink pins/fins while bad is not as bad and can still result in a working board (presuming the heat-sink didn't tear the chip from the board itself slightly in transit. Again a result of shit packing

Strange that the heat sinks are bent. I am not sure what kind of material is used to paste the heat sinks onto the A1. From my limited knowledge, typically conductive paste heats up and starts flowing, so there is usually something to bolt down the heat sink. In this case, there's nothing bolting it down. Now I notice that the paste is white, usually this kind of paste is the slightly sticky kind and doesn't flow when it gets heated up. Still, I don't know why the heat sinks are so small.

loshia

legendary

Activity: 1610

Merit: 1000

This is pic of 1 of my boards that doesnt run. you can see the bent copper heat sinks and paste all over.

I don't understand the heat sink configuration here though?

Why are the heat-sinks on the A1 chips so small?

What is the bigger heat sink on the other side connected to?

Because 30 % of the heat can be disposed from one side of the chip
70% from the other
This seems to be done right
CONGRATS. AMT Grin

This is useless of course as all my other posts right?
In other this stuff to work something needs to blow both dorm the top and the bottom
But this is beyond amt knowledge I guess and it is not their fault that doit folks are not doing right Grin

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!