how about 12x 1080ti's windows support?
Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 23. (Read 110186 times)
no enough candidates (6825 available, must be more than 8192
What does this message mean?
What does this message mean?
Hi all, the question was already asked but not answered:
How is the pool http://xpmforall.org/ paying XPM (time, min value...) ?
xpmforall.org: 4 XPM minimal payout, payments every hour, no delay now.How is the pool http://xpmforall.org/ paying XPM (time, min value...) ?
coinsforall.io: configurable payout (minimal 0.1 XPM), manual request supported, payments every 10 minutes.
2 days i don't receive payment. 4xpm on my balance. AR1MADPn2rB9aWG4TDmqqkA1f6YpwQbC7u
just in first day i receive 1xpm. what to do?
I see 5 XPM payed, 0.11 on balance at xpmforall.org.just in first day i receive 1xpm. what to do?
I have a few mining rigs of 8x 1080ti's per mining rig, and my CPU is very shit (Intel Celeron G3930). This is the optimal mining rig setup for mining other coins. But mining on XPM I seem to get only 0.1-0.15 CPD per card. Does my setup not work for mining this coin since my CPU is too shit? Will the new miner version 10.3 solve this problem? I followed most of the instructions in the config file.
platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices = ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]
Anything else from the settings above that can be causing problems? ^
Thanks in advance
platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices = ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]
Anything else from the settings above that can be causing problems? ^
Thanks in advance
xpmclient 10.2.2 support 8x1080Ti but on Linux only, native CUDA miner almost ready, wait a little bit plz.
http://xpm.x-i-tech.com scam, 2 days no payment. on the balance of 10 coins. The mail is not answered!
is somebody tried gtx1060 6GB?
how many cpd per card?
how many cpd per card?
Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers
hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?
it's too low for fury and rx580 cards.
fury (1000/500) 0.56
fury x (1000/500) 0.64
rx580 (1340/2000) 0.47
working fine on 64bit xpmclient.
Can you post settings that gets you 0.47 on RX 580?
I have:
- Core Clock: 1265
- Mem Clock: 2000
- multiplierLimits = ["24", "31", "35"];
- windowSize = "8192";
- sieveSize = "420";
- weaveDepth = "40960";
Oh and I run the blockchain drivers. Do the newest Adrenaline drivers work better?
And I have OneClickPatch from Polaris editor applied. But that only sets the straps on the highest bands.
I only get around 0.40 max. But mostly 0.37-0.39. So what am I missing?
2 days i don't receive payment. 4xpm on my balance. AR1MADPn2rB9aWG4TDmqqkA1f6YpwQbC7u
just in first day i receive 1xpm. what to do?
I have same problem.just in first day i receive 1xpm. what to do?
I think we must wait for 7.39 value and later payment will be done.
2 days i don't receive payment. 4xpm on my balance. AR1MADPn2rB9aWG4TDmqqkA1f6YpwQbC7u
just in first day i receive 1xpm. what to do?
just in first day i receive 1xpm. what to do?
Hi guys, could you please help me how to get rid of this message "OpenCL error: -9999 at C:/build/xpmclient/src/opencl.cpp:145" during start of miner.
It finds both GPUs (integrated and all 1080TIs) and I expect that Intel iGPU should be blocked somehow. I don't want to block in in BIOS due to dummy HDMI plug.
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'NVIDIA CUDA'
Used miner - xpmclient-10.2.2-beta-win64.
It finds both GPUs (integrated and all 1080TIs) and I expect that Intel iGPU should be blocked somehow. I don't want to block in in BIOS due to dummy HDMI plug.
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'NVIDIA CUDA'
Used miner - xpmclient-10.2.2-beta-win64.
Hi people, please maybe some one knows what its can be?
RX480 cards, two sample rigs, one working well with out troubles, second show something like this:
http://prntscr.com/jc43im
error opencl: -30 whats it can be?
Thank's for helping
RX480 cards, two sample rigs, one working well with out troubles, second show something like this:
http://prntscr.com/jc43im
error opencl: -30 whats it can be?
Thank's for helping
I have a few mining rigs of 8x 1080ti's per mining rig, and my CPU is very shit (Intel Celeron G3930). This is the optimal mining rig setup for mining other coins. But mining on XPM I seem to get only 0.1-0.15 CPD per card. Does my setup not work for mining this coin since my CPU is too shit? Will the new miner version 10.3 solve this problem? I followed most of the instructions in the config file.
platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices = ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]
Anything else from the settings above that can be causing problems? ^
Thanks in advance
platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices = ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]
Anything else from the settings above that can be causing problems? ^
Thanks in advance
have the same problem i5 processor and at full power it can handle max 3x 1080ti if i add another so the power goes down
can you fix it somehow?
I have a few mining rigs of 8x 1080ti's per mining rig, and my CPU is very shit (Intel Celeron G3930). This is the optimal mining rig setup for mining other coins. But mining on XPM I seem to get only 0.1-0.15 CPD per card. Does my setup not work for mining this coin since my CPU is too shit? Will the new miner version 10.3 solve this problem? I followed most of the instructions in the config file.
platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices = ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]
Anything else from the settings above that can be causing problems? ^
Thanks in advance
platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices = ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]
Anything else from the settings above that can be causing problems? ^
Thanks in advance
Hi all, the question was already asked but not answered:
How is the pool http://xpmforall.org/ paying XPM (time, min value...) ?
How is the pool http://xpmforall.org/ paying XPM (time, min value...) ?
what kind of results are expected with a 1080ti? Mine are doing 0.65 cpd.
Also anyone mining with nvOC? I was hoping to set up mining for all of my rigs
Also anyone mining with nvOC? I was hoping to set up mining for all of my rigs
I get the same on my 1080 ti with recommended parameters for nvidia (win 10 version)
hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?
it's too low for fury and rx580 cards.
fury (1000/500) 0.56
fury x (1000/500) 0.64
rx580 (1340/2000) 0.47
working fine on 64bit xpmclient.
is somebody tried gtx1060 6GB?
how many cpd per card?
how many cpd per card?
Is somebody tried RX550 cards?
hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?
it's too low for fury and rx580 cards.
fury (1000/500) 0.56
fury x (1000/500) 0.64
rx580 (1340/2000) 0.47
working fine on 64bit xpmclient.
What does this mean?
GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_353E174B&REV_CF_6&24DF563B&0&0008020BA iBusNumber 24 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon (TM) RX 470 Graphics
Failed to ADL_Adapter_ID_Get
Failed to ADL_Overdrive5_ODPerformanceLevels_GetN=12 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: primorial = 13082761331670030 (54 bits)
GPU 0: sieve size = 55050240 (26 bits)
* warning: no enough candidates (7847 available, must be more than 8192
* increase sieves per round to 6
Then starts mining but only have 0.26 cpd
Using w10 blockchain drivers
GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_353E174B&REV_CF_6&24DF563B&0&0008020BA iBusNumber 24 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon (TM) RX 470 Graphics
Failed to ADL_Adapter_ID_Get
Failed to ADL_Overdrive5_ODPerformanceLevels_GetN=12 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: primorial = 13082761331670030 (54 bits)
GPU 0: sieve size = 55050240 (26 bits)
* warning: no enough candidates (7847 available, must be more than 8192
* increase sieves per round to 6
Then starts mining but only have 0.26 cpd
Using w10 blockchain drivers
you new people really should just read through this thread before pounding extremal with shit ton of questions you will get a faster answer if you just search yourself
Jump to: