Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 22. (Read 110186 times)
where is -d option here?
Waiting for version 10.3 every moment with CUDA optimization.
The opencl version is useless with many cards and celeron cpu's in the rig, but it can be fixed easily.
Miner works with NVidia, but at this moment Linux recommended, because Windows version have a problem - 100% CPU load.
this can be solved with a few lines of code.
https://github.com/pandegroup/openmm/issues/1541
is 12 gpu win 10 stable?
The miner keeps crashing on 12 nvidia gpus (linux) even if I enable only 8. Works well on 6-8 gpu rigs.
thanks eXtremal for your reply about payements
I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator
I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)
I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator
I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)
Basically look my settings I posted for RX 580. It runs rock solid with that. I also undervolt a little as power consumption is quite high on this coin.
thanks, so far so good, hashrate at 0.38 CPD and no crash...
I think this software requires still a lot of optmization
Waiting for version 10.3 every moment with CUDA optimization.
Then Primecoin going to the grave
I think this software requires still a lot of optmization
Some cards are still crashing and it is still not being able to be perfect.
How many CPD you get on 1070 Ti?
Hi all,
Having trouble keeping my 6 x 1080ti rig from crashing with 10.2.2 miner...also tried the "stable one" 9.4.1 with even less luck.
10.2.2 works for a bit and then all cards crash. I've read through the forum and am confident that I've got the setting correct in the config file and I'm leaving all of the frequency/clocks section to all default and the rest appears like pretty basic setup.
Curious what the common causes of crashes are? I didn't see a driver requirement on the OP so I've left things where they've been for awhile, and stable on all other algos...
I have seen an error about not enough hashes but I guessing that's unrelated.
Having trouble keeping my 6 x 1080ti rig from crashing with 10.2.2 miner...also tried the "stable one" 9.4.1 with even less luck.
10.2.2 works for a bit and then all cards crash. I've read through the forum and am confident that I've got the setting correct in the config file and I'm leaving all of the frequency/clocks section to all default and the rest appears like pretty basic setup.
Curious what the common causes of crashes are? I didn't see a driver requirement on the OP so I've left things where they've been for awhile, and stable on all other algos...
I have seen an error about not enough hashes but I guessing that's unrelated.
is somebody tried gtx1060 6GB?
how many cpd per card?
how many cpd per card?
Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers
thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.
Of course AMD now is better option because of miner. But let see - 0.20 cpd now is 0.00020000 BTC daily.
I don`t know better option for one GTX1060 at this moment.
Am i wrong?
thanks eXtremal for your reply about payements
I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator
I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)
I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator
I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)
Basically look my settings I posted for RX 580. It runs rock solid with that. I also undervolt a little as power consumption is quite high on this coin.
Can you post settings that gets you 0.47 on RX 580?
I have:
- Core Clock: 1265
- Mem Clock: 2000
- multiplierLimits = ["24", "31", "35"];
- windowSize = "8192";
- sieveSize = "420";
- weaveDepth = "40960";
Oh and I run the blockchain drivers. Do the newest Adrenaline drivers work better?
And I have OneClickPatch from Polaris editor applied. But that only sets the straps on the highest bands.
I only get around 0.40 max. But mostly 0.37-0.39. So what am I missing?
set sievesize=630, other settings are good.
you just need good kernel for that settings.
Thx. Ah I remember you talking about an optimized kernel. Did you change your mind about disclosing how to build it myself?
Anyway thx for the sieveSize tip, so other then that I have optimal setting. Good to know.
is somebody tried gtx1060 6GB?
how many cpd per card?
how many cpd per card?
Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers
thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.
thanks eXtremal for your reply about payements
I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator
I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)
I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator
I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)
Can you post settings that gets you 0.47 on RX 580?
I have:
- Core Clock: 1265
- Mem Clock: 2000
- multiplierLimits = ["24", "31", "35"];
- windowSize = "8192";
- sieveSize = "420";
- weaveDepth = "40960";
Oh and I run the blockchain drivers. Do the newest Adrenaline drivers work better?
And I have OneClickPatch from Polaris editor applied. But that only sets the straps on the highest bands.
I only get around 0.40 max. But mostly 0.37-0.39. So what am I missing?
set sievesize=630, other settings are good.
you just need good kernel for that settings.
You must practice to use the pool mining and use the new settings that are there.
Why 11ch =/= 10x 10ch?
12ch = 11ch I can understand, but why not reward the blocks finders?
Pool must reward miners according to hash rate only, not according to luck.12ch = 11ch I can understand, but why not reward the blocks finders?
Luck? I found several blocks, but was credited less than the half I should have got. I am going to solomine then. It was a good experience there though, just not good for bigger miners.
Jump to: