Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 26.

Hyp0crit

newbie

Activity: 109

Merit: 0

Quote from: antantti on April 27, 2018, 06:25:13 AM

Quote from: Hyp0crit on April 26, 2018, 03:51:50 AM

Anyone tried mining this with 295x2 ?
What speed you get and which drivers to use.

Core voltage: -60mV
Core clock: default (1018)
Mem. Clock: default (1250)

Temps 63 & 61.
Cpd 0.42 each.

You need to tune your clocks + voltage down otherwise you will hit power/ temp limits and start throttling/ melting cables + connectors.

antantti

legendary

Activity: 1176

Merit: 1015

Quote from: Hyp0crit on April 26, 2018, 03:51:50 AM

Anyone tried mining this with 295x2 ?
What speed you get and which drivers to use.

You need to tune your clocks + voltage down otherwise you will hit power/ temp limits and start throttling/ melting cables + connectors.

Hyp0crit

newbie

Activity: 109

Merit: 0

Quote from: kev7112001 on April 27, 2018, 02:58:41 AM

u get the same speed as you would from 2 290x's

That is 0.42 CDP per core.
Is that low or normal?

kev7112001

sr. member

Activity: 479

Merit: 250

u get the same speed as you would from 2 290x's

Hyp0crit

newbie

Activity: 109

Merit: 0

Anyone tried mining this with 295x2 ?
What speed you get and which drivers to use.

drozenski

newbie

Activity: 56

Merit: 0

My dogs bumped my machine and caused it to reboot. Now i get this error when trying to start the miner. any one know how to fix this error?

OpenCL error: -1001 at C:/build/xpmclient/src/opencl.cpp:14

abrgeza

jr. member

Activity: 117

Merit: 2

Quote from: hopguide on April 23, 2018, 06:26:00 AM

Quote from: eXtremal on April 20, 2018, 07:11:44 AM

Quote from: hopguide on April 15, 2018, 03:44:01 AM

Why 11ch =/= 10x 10ch?
12ch = 11ch I can understand, but why not reward the blocks finders?

Pool must reward miners according to hash rate only, not according to luck.

Luck? I found several blocks, but was credited less than the half I should have got. I am going to solomine then. It was a good experience there though, just not good for bigger miners.

i have better payout on http://xpm.x-i-tech.com than on both xtremal's pools.
maybe you should try your luck on that pool.

hopguide

jr. member

Activity: 55

Merit: 1

Quote from: eXtremal on April 20, 2018, 07:11:44 AM

Quote from: hopguide on April 15, 2018, 03:44:01 AM

Why 11ch =/= 10x 10ch?
12ch = 11ch I can understand, but why not reward the blocks finders?

Pool must reward miners according to hash rate only, not according to luck.

Luck? I found several blocks, but was credited less than the half I should have got. I am going to solomine then. It was a good experience there though, just not good for bigger miners.

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: hopguide on April 15, 2018, 03:44:01 AM

Why 11ch =/= 10x 10ch?
12ch = 11ch I can understand, but why not reward the blocks finders?

Pool must reward miners according to hash rate only, not according to luck.

Quote

hi my friend))how your sweet holidays?
when you want release miner vers 10.3 on windows?which dates or months?

Why you decide about holidays, too long time without new miner releases? Yes, because 10.3 will have a lot of new features.
I planned release 10.3 at 15-20 May, but at the end of April I release CUDA port of 10.2.2 for testing.

korjik

newbie

Activity: 48

Merit: 0

Quote from: eXtremal on April 14, 2018, 06:15:14 AM

Quote from: CrazyRooster on April 12, 2018, 05:29:53 AM

Could you add a backup server and failover functions in the new version?
xpmforall has only one address.
Sometimes it disconnects all my miners. Sometimes i get a very high latency

Failover functions will be full enabled in 10.3, now it not works correctly on all systems.
First priority for next release is CUDA version.

hi my friend))how your sweet holidays?
when you want release miner vers 10.3 on windows?which dates or months?

hopguide

jr. member

Activity: 55

Merit: 1

Why 11ch =/= 10x 10ch?
12ch = 11ch I can understand, but why not reward the blocks finders?

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: CrazyRooster on April 12, 2018, 05:29:53 AM

Could you add a backup server and failover functions in the new version?
xpmforall has only one address.
Sometimes it disconnects all my miners. Sometimes i get a very high latency

Failover functions will be full enabled in 10.3, now it not works correctly on all systems.
First priority for next release is CUDA version.

kev7112001

sr. member

Activity: 479

Merit: 250

their are failover functions already also you can use script or use restarter programs should have stuff like this down just for any mining/miner as you cant always expect such support

the basic in the config.txt
# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";

for those on win and want a easy GUI
https://restarter.en.uptodown.com/windows

whole bunch of new these days but back in the day i helped with this still works if you just rename exe on any miner
http://manotechnology.blogspot.com/p/cgwatcher.html

abrgeza

jr. member

Activity: 117

Merit: 2

Quote from: CrazyRooster on April 12, 2018, 05:29:53 AM

Hi eXtremal
Could you add a backup server and failover functions in the new version?

it would be great if he can do that.

CrazyRooster

newbie

Activity: 14

Merit: 0

Quote

xpmclient 10.3 development started, main target of this release - introduce CUDA version of miner with good advantage for NVidia cards and remove high CPU load on Windows.

Hi eXtremal
Could you add a backup server and failover functions in the new version?
xpmforall has only one address.
Sometimes it disconnects all my miners. Sometimes i get a very high latency

buny

full member

Activity: 237

Merit: 100

Quote

By 2011, the largest known chain of Cunningham of any kind has a length of 17. The first was found a chain of the first kind, beginning with 2759832934171386593519, (found by Yaroslav Vroblevsky in 2008).