Optiminer/Zcash v1.7 (GPU, Windows+Linux, AMD) - page 26.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

i got 262 Sol on Linux (Rx 480) / card Grin

arielbit

legendary

Activity: 3416

Merit: 1059

Quote from: optiminer on January 09, 2017, 06:37:36 AM

Quote from: arielbit on January 08, 2017, 11:47:47 PM

Quote from: zzzzzzzzzz on January 08, 2017, 11:44:13 PM

Quote from: arielbit on January 08, 2017, 11:06:34 PM

hmmm.. my r9 390 is at 346-353 using optiminer

using claymore my 390 is only at ~330

290x is at 326-331

using claymore my 290x is only at ~319

my hawaii gpus are on optiminer now..

and it seems my these cards are cooler using optiminer specially my 290x

With v1.3 I'm getting ~400 sol/s with my R9 Nano, stock clock, linux. Running very well!

i don't have a nano, i have a fury but it is only reaching 330 h/s on optiminer, but it can reach up to 390 h/s using claymore

all my cards are on stock roms and overclocked BTW

330h/s sounds low for the fury. Is this on windows or linux?

windows x64, 16.10.3 driver

optiminer

full member

Activity: 187

Merit: 100

Quote from: arielbit on January 08, 2017, 11:47:47 PM

Quote from: zzzzzzzzzz on January 08, 2017, 11:44:13 PM

Quote from: arielbit on January 08, 2017, 11:06:34 PM

hmmm.. my r9 390 is at 346-353 using optiminer

using claymore my 390 is only at ~330

290x is at 326-331

using claymore my 290x is only at ~319

my hawaii gpus are on optiminer now..

and it seems my these cards are cooler using optiminer specially my 290x

With v1.3 I'm getting ~400 sol/s with my R9 Nano, stock clock, linux. Running very well!

i don't have a nano, i have a fury but it is only reaching 330 h/s on optiminer, but it can reach up to 390 h/s using claymore

all my cards are on stock roms and overclocked BTW

330h/s sounds low for the fury. Is this on windows or linux?

batut

newbie

Activity: 25

Merit: 0

Quote from: arielbit on January 09, 2017, 04:04:26 AM

here you go newbs...an example of a .bat file for running optiminer

Code:

SET GPU_FORCE_64BIT_PTR=1

optiminer -s zec-cn1.dwarfpool.com:3336 -u youraddress.rig1 -p x -i 4

pause

THANK YOU VERY MUCH.

arielbit

legendary

Activity: 3416

Merit: 1059

here you go newbs...an example of a .bat file for running optiminer

Code:

SET GPU_FORCE_64BIT_PTR=1

optiminer -s zec-cn1.dwarfpool.com:3336 -u youraddress.rig1 -p x -i 4

pause

batut

newbie

Activity: 25

Merit: 0

Quote from: zzzzzzzzzz on January 08, 2017, 09:52:21 PM

Quote from: jelin1984 on January 08, 2017, 09:38:46 PM

hello friends.
anyone to share start.bat line examle. for windows

link?

Read?

I can run miner for windows.
please help. I need an example start.bat file

arielbit

legendary

Activity: 3416

Merit: 1059

Quote from: zzzzzzzzzz on January 08, 2017, 11:44:13 PM

Quote from: arielbit on January 08, 2017, 11:06:34 PM

hmmm.. my r9 390 is at 346-353 using optiminer

using claymore my 390 is only at ~330

290x is at 326-331

using claymore my 290x is only at ~319

my hawaii gpus are on optiminer now..

and it seems my these cards are cooler using optiminer specially my 290x

With v1.3 I'm getting ~400 sol/s with my R9 Nano, stock clock, linux. Running very well!

i don't have a nano, i have a fury but it is only reaching 330 h/s on optiminer, but it can reach up to 390 h/s using claymore

all my cards are on stock roms and overclocked BTW

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: arielbit on January 08, 2017, 11:06:34 PM

hmmm.. my r9 390 is at 346-353 using optiminer

using claymore my 390 is only at ~330

290x is at 326-331

using claymore my 290x is only at ~319

my hawaii gpus are on optiminer now..

and it seems my these cards are cooler using optiminer specially my 290x

With v1.3 I'm getting ~400 sol/s with my R9 Nano, stock clock, linux. Running very well!

arielbit

legendary

Activity: 3416

Merit: 1059

hmmm.. my r9 390 is at 346-353 using optiminer

using claymore my 390 is only at ~330

290x is at 326-331

using claymore my 290x is only at ~319

my hawaii gpus are on optiminer now..

and it seems my these cards are cooler using optiminer specially my 290x

felixbrucker

hero member

Activity: 700

Merit: 500

Quote from: patrike on December 13, 2016, 05:40:14 PM

Hi,
I've been getting several request for adding support for Optiminer Zcash in Awesome Miner. However, I couldn't find any documentation for the HTTP API other than it's enabled with the parameter '-m'. Any suggestions where I can find it? Thanks!

some small paragraph in the gh repo would be great!

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: jelin1984 on January 08, 2017, 09:38:46 PM

hello friends.
anyone to share start.bat line examle. for windows

link?

Read?

jelin1984

legendary

Activity: 2408

Merit: 1004

hello friends.
anyone to share start.bat line examle. for windows

link?

shadowhlohavec

full member

Activity: 207

Merit: 100

NoizChain

Quote from: batut on January 08, 2017, 03:23:57 PM

hello friends.
anyone to share start.bat line examle. for windows

up

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: nevermind41 on January 08, 2017, 02:51:50 PM

Quote from: optiminer on January 08, 2017, 02:37:48 PM

Quote from: nevermind41 on January 08, 2017, 01:20:40 PM

I tried -c option to determine the platform but I alays get the same error. I tried -c 0 and also 1 2 too. The interesting part of the issue it always says platform ''0'' in error message
[2017-01-08 20:19:55.974] [error] OpenCL error: Failed to list devices of platfo
rm 0 (CL_DEVICE_NOT_FOUND)
[2017-01-08 20:19:55.975] [info] Press any key to exit application.

1.3.1 has a bug in the automatic platform detection. If you see this error, version 1.3.1 does not work and you need to use 1.3.0 and manually specify the platform with -c.

I didn't use auto detection. I putted the -c parameter to batch file and tried 0,1 and 2 but I always got the same error message that I gave.
And also [1.3.1] Add option to list devices (--list-devices). doesn't work. It didn't detect my 6 X 470 cards in different 2 rigs. Both rigs have different version drivers.

He said "you need to use 1.3.0" and "manually specify the platform with -c", i.e. 1.3.1 will not work, even if you specify the platform with "-c", due to the automatic platform detection bug.

batut

newbie

Activity: 25

Merit: 0

hello friends.
anyone to share start.bat line examle. for windows

nevermind41

full member

Activity: 186

Merit: 100

Quote from: optiminer on January 08, 2017, 02:37:48 PM

Quote from: nevermind41 on January 08, 2017, 01:20:40 PM

I tried -c option to determine the platform but I alays get the same error. I tried -c 0 and also 1 2 too. The interesting part of the issue it always says platform ''0'' in error message
[2017-01-08 20:19:55.974] [error] OpenCL error: Failed to list devices of platfo
rm 0 (CL_DEVICE_NOT_FOUND)
[2017-01-08 20:19:55.975] [info] Press any key to exit application.

1.3.1 has a bug in the automatic platform detection. If you see this error, version 1.3.1 does not work and you need to use 1.3.0 and manually specify the platform with -c.

I didn't use auto detection. I putted the -c parameter to batch file and tried 0,1 and 2 but I always got the same error message that I gave.
And also [1.3.1] Add option to list devices (--list-devices). doesn't work. It didn't detect my 6 X 470 cards in different 2 rigs. Both rigs have different version drivers.

optiminer

full member

Activity: 187

Merit: 100

Quote from: nevermind41 on January 08, 2017, 01:20:40 PM

I tried -c option to determine the platform but I alays get the same error. I tried -c 0 and also 1 2 too. The interesting part of the issue it always says platform ''0'' in error message
[2017-01-08 20:19:55.974] [error] OpenCL error: Failed to list devices of platfo
rm 0 (CL_DEVICE_NOT_FOUND)
[2017-01-08 20:19:55.975] [info] Press any key to exit application.

1.3.1 has a bug in the automatic platform detection. If you see this error, version 1.3.1 does not work and you need to use 1.3.0 and manually specify the platform with -c.

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: usefree on January 08, 2017, 12:31:35 PM

With version 1.3.0 and 1.3.1 i get error segmentation fault.
ubuntu 14.04 x86_64, fglrx 15.20.3, stock r9 290x. So i moved to Claymore 10.
may be usefull link http://usefree.com.ua/mining-zcash-ubuntu-claymore-optiminer/

You are using an old driver that the dev does not test on. He tests using the latest Crimson fglrx driver, which is 15.302. I had problems initially with v1.3 using fglrx 15.201, but everything runs fine after updating to 15.302. I running Ubuntu 14.04.3.

restless

legendary

Activity: 1151

Merit: 1001

Is it possible to use backup server? eg connect to server 1 if connection drops try server 2...

nevermind41

full member

Activity: 186

Merit: 100

I tried -c option to determine the platform but I alays get the same error. I tried -c 0 and also 1 2 too. The interesting part of the issue it always says platform ''0'' in error message
[2017-01-08 20:19:55.974] [error] OpenCL error: Failed to list devices of platfo
rm 0 (CL_DEVICE_NOT_FOUND)
[2017-01-08 20:19:55.975] [info] Press any key to exit application.

Topic: Optiminer/Zcash v1.7 (GPU, Windows+Linux, AMD) - page 26. (Read 115929 times)