<--- minus OEM cable since its not usa plug
Topic: Panda B3+ Review ! (Read 13008 times)
so we can purchase USA power cables and use these PSU's?
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
Can we install linux (EthOs) on panda? anyone tried??
They can run EthOS.
we run it on SSD or sata HDD?
You can even run it on USB.
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
Can we install linux (EthOs) on panda? anyone tried??
They can run EthOS.
we run it on SSD or sata HDD?
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
Can we install linux (EthOs) on panda? anyone tried??
Yes, I have 20 x Pandaminers running EthOS 1.2.2 right now
Just remember, at the end of the day they are 'just a PC in a special form factor box'..
wow great! cant wait to install ethos on my panda. they said start shipping on 22 june
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
Can we install linux (EthOs) on panda? anyone tried??
They can run EthOS.
Anyone know when the next group sale for Panda Miner is?
I would like to purchase a few, but it seems like I missed the cutoff this time.
I would like to purchase a few, but it seems like I missed the cutoff this time.
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
Can we install linux (EthOs) on panda? anyone tried??
Yes, I have 20 x Pandaminers running EthOS 1.2.2 right now
Just remember, at the end of the day they are 'just a PC in a special form factor box'..
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
Can we install linux (EthOs) on panda? anyone tried??
W0W!! Is that an Rx470 with a 6+1 phase VRM?
nope. You actually have a 240V and not the inverter going? If so maybe pop off all the cards but 1 and start booting 1 at a time and see if it works.
http://imgur.com/qsorcGr
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
Wow they couldn't even bother to put all four screws in for the fans on the top Panda miner?
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
I highly recommend ditching the crappy pirated Windows 10 they supply with the unit and installing EthOS, or PandaOS in its place.
disable that gpu as soon as mining starts and see if it keeps going. You just might have a weak gpu.
nope. You actually have a 240V and not the inverter going? If so maybe pop off all the cards but 1 and start booting 1 at a time and see if it works.
http://imgur.com/qsorcGr
Yeah I stopped using after getting mixed results with the first panda before the drivers decided to upgrade themselves, I only used the inverter to test the second one and it seemed to pretty much be working after replugging every connection, 240v finished today and it wants to be the biggest pain in my ass like usual
it's recognizing all of the cards, and sometimes they mine for 0-1 minute then one or more start to 0.000 and then claymore goes to reboot and freezes . .
nope. You actually have a 240V and not the inverter going? If so maybe pop off all the cards but 1 and start booting 1 at a time and see if it works.
<--- minus OEM cable since its not usa plug
You have any issues of the cards crashing once mining begins?
<--- minus OEM cable since its not usa plug
Who is running oem panda PSU with oem cable
Also anyone running that on 240v vs 220v?
Also anyone running that on 240v vs 220v?
That's a Gen 1 B3
here are the new ones. Yes I have one =P
On your gen 1 asm = ?here are the new ones. Yes I have one =P
Dcri = ?
You're running windows or smOS or pandamOS ?
Thanks for the picture I have either an even newer version than your gen 2 or a variation of it. It's similar different fan covers though, it's 4 fans in 5 fans out
Awaiting on ElioVP to produce a new Panda OS image that works with the modified motherboard / graphics driver.
That's a Gen 1 B3
here are the new ones. Yes I have one =P
On your gen 1 asm = ?here are the new ones. Yes I have one =P
Dcri = ?
You're running windows or smOS or pandamOS ?
Thanks for the picture I have either an even newer version than your gen 2 or a variation of it. It's similar different fan covers though, it's 4 fans in 5 fans out
That's a Gen 1 B3
here are the new ones. Yes I have one =P
here are the new ones. Yes I have one =P
Jump to: