Topic: Pangolinminer & Whatsminer FAQs - page 10. (Read 25113 times)
Ordered a couple of M3, asked them several times for a tracking. They delayed for a few days, CREATED a tracking but no pick up by the shipping company for a week, meaning they dont have the stock to send out but merely CREATED a tracking to please me. Whats the use of paying for a 2-3 days delivery but the delay is caused by lack of stock ? I strongly advise friends here to factor in delays and not trust what they state as delivery time. Is not the frieght company that is causing delay, is Pangolin itself.
I received an $80. 'apology coupon' from Pangolin in todays email.
If you have purchased our miner during 2017/12/21 ~ 2018/2/1. We believe you may have experienced some bad experience with the purchase. In that case, we decide to release some coupon as compensation.
They still owe me another M3 for March, so why don't they just ship it instead of begging for new orders?
The 'apology coupon' discount can only be used for the current M3 'heaters'. Any rumors if Pangolin is working on any new models?
If you have purchased our miner during 2017/12/21 ~ 2018/2/1. We believe you may have experienced some bad experience with the purchase. In that case, we decide to release some coupon as compensation.
They still owe me another M3 for March, so why don't they just ship it instead of begging for new orders?
The 'apology coupon' discount can only be used for the current M3 'heaters'. Any rumors if Pangolin is working on any new models?
If you recieve your m3 So why they dont deliverd my m3 yet?
http://uupload.ir/files/918f_img_20180301_225330.png
http://uupload.ir/files/918f_img_20180301_225330.png
Maybe because 28th february is the date of shipment.
So it will take some time to deliver its to your Country
Im waiting my m3s too.
If you recieve your m3 So why they dont deliverd my m3 yet?
http://uupload.ir/files/918f_img_20180301_225330.png
http://uupload.ir/files/918f_img_20180301_225330.png
They so badly promisong i ordered in 28 septamber for feb and they didnt send me tracking id yet.they should send me before march but no M3 delivered yet.is there any body delivered his m3 for feb batch?
Had 2 delivered as well no problems and they actually shipped on the 1st day of their expected ship date range.
Same here. DHL was painless. From time they left Hong Kong to my door step was just a couple of days.
They so badly promisong i ordered in 28 septamber for feb and they didnt send me tracking id yet.they should send me before march but no M3 delivered yet.is there any body delivered his m3 for feb batch?
Had 2 delivered as well no problems and they actually shipped on the 1st day of their expected ship date range.
They so badly promisong i ordered in 28 septamber for feb and they didnt send me tracking id yet.they should send me before march but no M3 delivered yet.is there any body delivered his m3 for feb batch?
Yes, got 2 units Feb batch. Both running great.
They so badly promisong i ordered in 28 septamber for feb and they didnt send me tracking id yet.they should send me before march but no M3 delivered yet.is there any body delivered his m3 for feb batch?
I still can't believe I missed Feb ship out because of an error on their part. I ordered Dec 14th and I'll have to wait till March 25th for my order, even though folks who buy today will get theirs the same week as me. Crazy. They won't do a single thing about it either.
how can i change frequency for overclocking?
when edit the file /etc/config/powers ,change the frequency from default to 480 "list 'power_limit' '3:000107:10:480:480:480:0:11500:600:1:1:10300:612:6:1'",then it works!
The GHSav is changed running to 8.7G.
but change the frequency from default to 648\660，it doesn't works.
The GHSav frequency is always running between 11.5 to 11.9.
when edit the file /etc/config/powers ,change the frequency from default to 480 "list 'power_limit' '3:000107:10:480:480:480:0:11500:600:1:1:10300:612:6:1'",then it works!
The GHSav is changed running to 8.7G.
but change the frequency from default to 648\660，it doesn't works.
The GHSav frequency is always running between 11.5 to 11.9.
Hello,
I would like to know if there is an importance filling the pool 2 and pool 3? Cause I filed them but there are not active, only the first one !
Thank you !
I would like to know if there is an importance filling the pool 2 and pool 3? Cause I filed them but there are not active, only the first one !
Thank you !
Those are your fallback pools.
So in case your primary pool, pool 1 has an issue, your miner will connect to the pool 2.
If also the pool 2 has an issue, the miner will then connect to the pool 3.
Hello,
I would like to know if there is an importance filling the pool 2 and pool 3? Cause I filed them but there are not active, only the first one !
Thank you !
I would like to know if there is an importance filling the pool 2 and pool 3? Cause I filed them but there are not active, only the first one !
Thank you !
Hello! Please tell me, one of the miners works for 6 minutes and will reboot. I have voltage regulators, no voltage surges. What could be wrong?
What are you running for your voltage? 120 or 240? Also, in cgminer, check the system log for the reboot error.
220 V I use a thyristor voltage regulator
E010
Miner thread isn't present
Restart cgminer
1
Sat Feb 17 14:30:06 +04 2018
cgminer-monitor
E011
Slot-1 Zero HS 180 seconds
Zero HS Warning
1
Wed Feb 14 13:28:48 2018
system-monitor
Hello! Please tell me, one of the miners works for 6 minutes and will reboot. I have voltage regulators, no voltage surges. What could be wrong?
What are you running for your voltage? 120 or 240? Also, in cgminer, check the system log for the reboot error.
Hello! Please tell me, one of the miners works for 6 minutes and will reboot. I have voltage regulators, no voltage surges. What could be wrong?
Disconnect one hashing board from power supply and check if miner is working fine with only two.
Hello! Please tell me, one of the miners works for 6 minutes and will reboot. I have voltage regulators, no voltage surges. What could be wrong?
One thing I noticed unlike my S9's or Avalon power supplies the M3's power supply is cool to the touch. While the M3 case is very warm and the S9/Avalon are cool to the touch.
Good info thanks! These things like to run at high 70s to mid 80s regardless of the ambient temp it seems. I was getting almost the exact temps as you with 60 ish deg intake air. Today it was in the mid 60s and my garage heated up to mid 70s so they are running anywhere from 81-85.
No problem. I can say, earlier this afternoon, my temps were staying above 80, and I was seeing consistent speeds from
12.5 - 13th/s. Theses seem to do their best work, when they can heat up some Hot Chocolate! Hahaha!
In that cold air what temps are you seeing?
Right now, at 32(23 real) outside and 55 in the garage, I'm getting inbetween 77 to 84, depending on the wind gusts really. The ole
garage isn't quite air tight, and I literally have nothing behind my house but open fields, for 2 miles. I've been monitoring them for
about 15hrs, and they've been very consistent since they warmed up. Still getting 11.9 -12.8 th/s.
Good info thanks! These things like to run at high 70s to mid 80s regardless of the ambient temp it seems. I was getting almost the exact temps as you with 60 ish deg intake air. Today it was in the mid 60s and my garage heated up to mid 70s so they are running anywhere from 81-85.
In that cold air what temps are you seeing?
Right now, at 32(23 real) outside and 55 in the garage, I'm getting inbetween 77 to 84, depending on the wind gusts really. The ole
garage isn't quite air tight, and I literally have nothing behind my house but open fields, for 2 miles. I've been monitoring them for
about 15hrs, and they've been very consistent since they warmed up. Still getting 11.9 -12.8 th/s.
Jump to: