Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 119. (Read 785017 times)

I just tried PM to Ethermine today, been mining about 2 hours.

As I look through the log, it seems that DEVFEE is having problems,



Is devfee harmless here or is it causing a problem.  I should NOT see the word DEVFEE for 30 I dont think.

Here is a snippet:
Starts devfee at 31 min:
Eth speed: 29.173 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #432dd006 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #b589f85a from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #93f0fd85 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #68ab5dc2 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #e8ef7f65 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Connecting to ethash pool ssl://us1.ethermine.org:5555 (proto: QtMiner)
Eth speed: 29.028 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #643f46f2 from us1.ethermine.org:4444; diff: 4000MH

*** 0:32 *** 2/12 15:59 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:32

DEVFEE then tries to disconnnect at 32, but errors out

Eth: Accepted shares 15 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.160 MH/s
Eth: Effective speed: 30.91 MH/s; at pool: 30.91 MH/s

Eth speed: 29.044 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #2a359ab5 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #712000d3 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.028 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #88668535 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.202 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #f7b8cca6 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Could not connect to ethash pool ssl://us1.ethermine.org:5555: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
DevFee: Giving up after 1 retries, switching to next pool
DevFee: Reconnecting in 3 seconds...
Eth speed: 29.199 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #00eaedf2 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Connecting to ethash pool ssl://asia1.ethermine.org:5555 (proto: EthProxy)
GPU1: 66C 24% 67W
GPUs power: 67.0 W
Eth: New job #3567d583 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #5864b00f from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.196 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #8aecdf07 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.200 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #7e2df522 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.201 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #da9fcb3e from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.193 MH/s, shares: 15/0/0, time: 0:33
Eth: New job #764b8689 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Disconnected and stopped
DevFee: Could not connect to ethash pool ssl://asia1.ethermine.org:5555: The I/O operation has been aborted because of either a thread exit or an application request
DevFee: Giving up after 1 retries, switching to next pool
DevFee: Reconnecting in 3 seconds...
DevFee: Connecting to ethash pool eth-us-east1.nanopool.org:9999 (proto: EthProxy)
DevFee: Connected to ethash pool eth-us-east1.nanopool.org:9999 (144.217.14.109)
Eth: New job #734bb31c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #57482cae from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth speed: 29.119 MH/s, shares: 15/0/0, time: 0:33
DevFee: New job #f867e4e8 from eth-us-east1.nanopool.org:9999; diff: 10000MH

*** 0:33 *** 2/12 15:59 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:33
Eth: Accepted shares 15 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.160 MH/s
Eth: Effective speed: 30.21 MH/s; at pool: 30.21 MH/s

Eth: New job #324aa8fe from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #6247e354 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth speed: 29.091 MH/s, shares: 15/0/0, time: 0:33

Devfee then continues
DevFee: New job #e92074f7 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #b7ac896a from us1.ethermine.org:4444; diff: 4000MH
GPU1: 66C 24% 67W
GPUs power: 67.1 W
DevFee: New job #08abbe59 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth speed: 29.092 MH/s, shares: 15/0/0, time: 0:33
Eth: New job #7e3f33dd from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #0e0dc839 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #875a86df from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.201 MH/s, shares: 15/0/0, time: 0:33
DevFee: New job #6d0b6a08 from eth-us-east1.nanopool.org:9999; diff: 10000MH
DevFee: New job #8541dda2 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #e5f9003f from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.199 MH/s, shares: 15/0/0, time: 0:33
DevFee: New job #aa60acce from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #8cdd1ced from us1.ethermine.org:4444; diff: 4000MH

Devfee continue for 20 min, eating all of my shares:

th: New job #33cf540e from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #33cf540e from asia1.ethermine.org:14444; diff: 4000MH
Eth speed: 29.133 MH/s, shares: 21/0/0, time: 0:55
Eth: New job #b1ae5d1c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #b1ae5d1c from asia1.ethermine.org:14444; diff: 4000MH
Eth speed: 29.197 MH/s, shares: 21/0/0, time: 0:55
Eth: New job #3dc8081d from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #3dc8081d from asia1.ethermine.org:14444; diff: 4000MH
DevFee: New job #cc1def1c from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #cc1def1c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #12843e8f from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #12843e8f from us1.ethermine.org:4444; diff: 4000MH
GPU1: 66C 24% 67W
GPUs power: 67.2 W
DevFee: New job #9950561d from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #9950561d from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.197 MH/s, shares: 21/0/0, time: 0:55
DevFee: New job #326c7653 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #326c7653 from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #7578c305 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #7578c305 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.163 MH/s, shares: 21/0/0, time: 0:55
DevFee: New job #cc53eac3 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #cc53eac3 from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #9fa0fec0 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #9fa0fec0 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #d1d9c59c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #d1d9c59c from asia1.ethermine.org:14444; diff: 4000MH
Eth speed: 29.134 MH/s, shares: 21/0/0, time: 0:55

*** 0:55 *** 2/12 16:22 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:21
Eth: Accepted shares 21 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.158 MH/s
Eth: Effective speed: 25.16 MH/s; at pool: 25.16 MH/s

DevFee: New job #b4c4ee4e from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #b4c4ee4e from us1.ethermine.org:4444; diff: 4000MH
DevFee: Disconnected and stopped
Eth speed: 29.127 MH/s, shares: 21/0/0, time: 0:55

Hi! The miner works great for me, thank you for all the work on it. Is there a command line option to stop it gracefully? I run it on Windows startup and therefore don’t have the console and would prefer to be able to do so instead of stopping the process. I looked but can’t find the switch / option.

Thank you very much in advance!

You are mining eth but you written coin etc, delete coin or write eth.

yes in advanced settings-custom size make minimum 60000 and max also 60000. 1st try 50000 if it is ok then use it.

Man windows is quite resource demanding. 

4gb ram / 16gb memstick / 13 gpus / linux.....

Has anyone been successful regulating fan speeds using the command -fanmin???  I don't know if the drivers are overruning the command line but I cant get my 5700xt to maintain fan speeds.  Using 5.5c.

1gb = 1024Mb
8Gb per card = 8192Mb vm space needed
8192Mb * 6 cards = 49125Mb vm space needed for the rig

Yes you need to enter it in the advanced settings

6 gpu in each rig.

how to increase?
 i have 16000 to 32000

i must type it in advanced settings?

Anyone running p104-100 with 8GB bios on hiveos with phoenixMiner? Using the -straps 4 flag the hash rate drops immediately from 36 to 30.

ç


Ok Thanks I format my pc.

I will start mining using my Asus ROG Zephyrus S17 with the following:

Intel Core i7-10875H @2.30 GHz
32 GB RAM
NVIDIA GeForce RTX2080 Super with Max-Q Design

Can someone let me know which configurations/commands are optimal for the config file please?

And if I want to configure it so it works at a lower level so that I can still browse the web and use Excel?
Thanks!

I'm sorry to hear that, but come on guys, we are tired and exhausted to say the same things again and again

DO NOT download anything except from official sources

Phoenix miner have the link on the first post of this thread

But please, format you PC as soon as you can, it's the safest thing to do

Hello, unfortunately I have fallen and I have downloaded the fake program that they have published, it was a Malwar. Do you know what type it is or what is the best thing I can do now?
 I have passed several antivurus and I have clean everything, apparently the pc works fine and its clean, but I am  considering formatting the computer.

I appreciate your help. Thanks

Hi, after 12 hours the miner starts giving this error -»

Unknown OpenCL driver version! Hashrate and stale shares may suffer

2021.02.12:11:15:58.688: main Phoenix Miner 5.2e Windows/msvc - Release build
2021.02.12:11:15:58.688: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal xxxxxxxxxxxxxxxxxxxxxx.480x480 -mt 1 -amd -coin etc
2021.02.12:11:16:00.688: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2021.02.12:11:16:00.688: main OpenCL platform: OpenCL 2.1 AMD-APP (3075.13)
2021.02.12:11:16:00.708: main Available GPUs for mining:
2021.02.12:11:16:00.708: main GPU1: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2021.02.12:11:16:00.708: main GPU2: Radeon (TM) RX 480 Graphics (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
2021.02.12:11:16:00.709: main ADL library initialized
2021.02.12:11:16:02.762: main Eth: Loading pools from epools.txt
2021.02.12:11:16:02.762: main Eth: the pool list contains 8 pools (2 from command-line)
2021.02.12:11:16:02.762: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2021.02.12:11:16:02.762: main Starting GPU mining
2021.02.12:11:16:02.762: main Matched GPU1 to ADL adapter index 8 (method 1)
2021.02.12:11:16:02.801: main GPU1: AMD driver 20.10.35.02

Is there a solution?

Really thx, I set it for -mi 2 and it get 59 Mhs without any laggs.

yes there must be command -mi . you can set it lower 10 or 9. default is 12. test it. maybe you will loose some hasrate but your pc will not lag.

With all these fake phoenix links (note: ALWAYS follow links on original post), I wish that new users should NOT be able to post links on threads, with a setting per thread. Just make it harder for these low lives.

is this normal ?

If i start PhoenixMiner 5.5c on a RX 6900xt it only detects 40 CU.
I though the 6900xt has 80 CU ? Or did the miner count them different and its normal ?

<<<

>>>

Does anything happen with rx 6800
Would you mind if you set up
timings and more