PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 118.

Ahmed69

newbie

Activity: 3

Merit: 0

Quote from: mrbugera2 on February 14, 2021, 10:50:33 AM

Quote from: skinnyfalcon on February 12, 2021, 02:46:47 PM

Quote from: mrbugera2 on February 12, 2021, 10:45:16 AM

Quote from: batsonxl on February 11, 2021, 11:56:01 AM

how many cards? Try give 50-60gb

6 gpu in each rig.

how to increase?
i have 16000 to 32000

i must type it in advanced settings?

1gb = 1024Mb
8Gb per card = 8192Mb vm space needed
8192Mb * 6 cards = 49125Mb vm space needed for the rig

Yes you need to enter it in the advanced settings

which will ne better, what to tupe in inital size and in maximum.. thanks for your reply

witchever , just tupe in man.. gooz luk

mrbugera2

jr. member

Activity: 85

Merit: 2

Quote from: skinnyfalcon on February 12, 2021, 02:46:47 PM

Quote from: mrbugera2 on February 12, 2021, 10:45:16 AM

Quote from: batsonxl on February 11, 2021, 11:56:01 AM

how many cards? Try give 50-60gb

6 gpu in each rig.

how to increase?
i have 16000 to 32000

i must type it in advanced settings?

1gb = 1024Mb
8Gb per card = 8192Mb vm space needed
8192Mb * 6 cards = 49125Mb vm space needed for the rig

Yes you need to enter it in the advanced settings

which will ne better, what to tupe in inital size and in maximum.. thanks for your reply

HariSeldon85

newbie

Activity: 4

Merit: 0

Quote from: Toughit on February 13, 2021, 06:03:46 PM

Code:



Maybe I'm asking the wrong question....

When you go to the ethermine page and enter your wallet, do you see the page with your shares displayed, I'm guessing 45 per hour.

If you are talking money, it takes about .1 ETH before they actually pay money, so you have to earn $170 dollars or so.

that was symply the point, I've figured it out by myself.

Ethermine has a threashold before payout. On ethermine page I'm seeing gained ethereum.

thanks a lot.

Devan_Bot

newbie

Activity: 1

Merit: 0

Need help fixing the below error occurring after DAG 100%

Stratum thread not responsive for 51 s
Fatal error detected. Restarting .

Toughit

full member

Activity: 378

Merit: 197

Code:



Maybe I'm asking the wrong question....

When you go to the ethermine page and enter your wallet, do you see the page with your shares displayed, I'm guessing 45 per hour.

If you are talking money, it takes about .1 ETH before they actually pay money, so you have to earn $170 dollars or so.

Toughit

full member

Activity: 378

Merit: 197

Quote from: HariSeldon85 on February 13, 2021, 02:48:13 PM

Quote from: Toughit on February 13, 2021, 02:34:14 PM

Quote from: HariSeldon85 on February 13, 2021, 01:42:45 PM

Hi Everyone, sorry for the silly question, maybe is my second post on this forum

I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet".

I'm mining Ethermine with this command:

Code:

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3

pause

Took maybe 15 min for mine to show up yesterday.
Wallet address problem?

No problem at all... i mean... I just copy& paste the wallet address from myetherwallet.

Are you sure you need only 15 minutes to receive the first reward ?

Certainly within the hour I had a chart going on the ethermine page.

Your wallet address does NOT have these around it does it: []?

Can you restart it and capture the first fifty lines or so from the log?

Try -wal 0xabcetc.Hari (wallet address dot some name)

HariSeldon85

newbie

Activity: 4

Merit: 0

Quote from: Toughit on February 13, 2021, 02:34:14 PM

Quote from: HariSeldon85 on February 13, 2021, 01:42:45 PM

Hi Everyone, sorry for the silly question, maybe is my second post on this forum

I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet".

I'm mining Ethermine with this command:

Code:

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3

pause

Code:

Eth speed: 59.597 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #acd21def from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #1990f547 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #96b3f63b from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.313 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #7212f2e3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c03cd29e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.006 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #2087171e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.632 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #d3862a91 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c165a715 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.844 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #e9e24b65 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b11ae5ed from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #78022362 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #d93a8d7c from eu1.ethermine.org:4444; diff: 4000MH
GPU1: 68C 72% 165W
GPUs power: 164.6 W

*** 6:47 *** 2/13 19:39 **************************************
Eth: Mining ETH on eu1.ethermine.org:4444 for 6:47
Eth speed: 59.073 MH/s, shares: 324/0/0, time: 6:47
Eth: Accepted shares 324 (66 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 20.37%
Eth: Maximum difficulty of found share: 7143.5 GH (!)
Eth: Average speed (5 min): 59.261 MH/s
Eth: Effective speed: 53.06 MH/s; at pool: 53.06 MH/s

I've checked MyEtherWallet and still no reward...mining from 7 hours...is this normal? How long usually need to wait with ethermine pool to have a reward?

Many thanks in advance

Took maybe 15 min for mine to show up yesterday.
Wallet address problem?

No problem at all... i mean... I just copy& paste the wallet address from myetherwallet.

Are you sure you need only 15 minutes to receive the first reward ?

Toughit

full member

Activity: 378

Merit: 197

Quote from: HariSeldon85 on February 13, 2021, 01:42:45 PM

Hi Everyone, sorry for the silly question, maybe is my second post on this forum

I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet".

I'm mining Ethermine with this command:

Code:

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3

pause

Code:

Eth speed: 59.597 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #acd21def from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #1990f547 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #96b3f63b from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.313 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #7212f2e3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c03cd29e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.006 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #2087171e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.632 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #d3862a91 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c165a715 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.844 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #e9e24b65 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b11ae5ed from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #78022362 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #d93a8d7c from eu1.ethermine.org:4444; diff: 4000MH
GPU1: 68C 72% 165W
GPUs power: 164.6 W

*** 6:47 *** 2/13 19:39 **************************************
Eth: Mining ETH on eu1.ethermine.org:4444 for 6:47
Eth speed: 59.073 MH/s, shares: 324/0/0, time: 6:47
Eth: Accepted shares 324 (66 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 20.37%
Eth: Maximum difficulty of found share: 7143.5 GH (!)
Eth: Average speed (5 min): 59.261 MH/s
Eth: Effective speed: 53.06 MH/s; at pool: 53.06 MH/s

I've checked MyEtherWallet and still no reward...mining from 7 hours...is this normal? How long usually need to wait with ethermine pool to have a reward?

Many thanks in advance

Took maybe 15 min for mine to show up yesterday.
Wallet address problem?

HariSeldon85

newbie

Activity: 4

Merit: 0

Hi Everyone, sorry for the silly question, maybe is my second post on this forum

I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet".

I'm mining Ethermine with this command:

Code:

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3

pause

Code:

Eth speed: 59.597 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #acd21def from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #1990f547 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #96b3f63b from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.313 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #7212f2e3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c03cd29e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.006 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #2087171e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.632 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #d3862a91 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c165a715 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.844 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #e9e24b65 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b11ae5ed from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #78022362 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #d93a8d7c from eu1.ethermine.org:4444; diff: 4000MH
GPU1: 68C 72% 165W
GPUs power: 164.6 W

*** 6:47 *** 2/13 19:39 **************************************
Eth: Mining ETH on eu1.ethermine.org:4444 for 6:47
Eth speed: 59.073 MH/s, shares: 324/0/0, time: 6:47
Eth: Accepted shares 324 (66 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 20.37%
Eth: Maximum difficulty of found share: 7143.5 GH (!)
Eth: Average speed (5 min): 59.261 MH/s
Eth: Effective speed: 53.06 MH/s; at pool: 53.06 MH/s

I've checked MyEtherWallet and still no reward...mining from 7 hours...is this normal? How long usually need to wait with ethermine pool to have a reward?

Many thanks in advance

3_tech

newbie

Activity: 1

Merit: 0

using PhoenixMiner_5.5c_Windows and have slowdown with newer Nvidia drivers

nvidia v460.89 ~60 Mh/s
any newer nvidia driver (e.g. 461.40) ~50 Mh/s
I've tried running PhoenixMiner as Admin - still ~50 MH/s
reinstall nvidia v460.89 back to ~60 Mh/s

Any solutions for reclaiming hash rate with newer nvidia drivers? Many thanks.

Hash rate quoted while only running miner, with PC at lock screen.

Card:
Nvidia 3060ti
-500 clock
+1050 ram
60% power

PC:
5900X CPU
x570 MB
windows 10 64bit

coinhunter142

newbie

Activity: 23

Merit: 0

Quote from: batsonxl on February 13, 2021, 06:06:03 AM

Quote from: coinhunter142 on February 12, 2021, 10:32:01 PM

RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?

I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance

if you go 1-2 pages back you will find your answer

I did, thank you for your answer, though it would be nice if Phoenixminer prevented this problem out of the box, cause it took me quite a while before I found the solution.

Toughit

full member

Activity: 378

Merit: 197

Quote from: batsonxl on February 13, 2021, 06:08:25 AM

Quote from: Toughit on February 12, 2021, 05:49:35 PM

I just tried PM to Ethermine today, been mining about 2 hours.

As I look through the log, it seems that DEVFEE is having problems,

Is devfee harmless here or is it causing a problem. I should NOT see the word DEVFEE for 30 I dont think.

Here is a snippet:
Starts devfee at 31 min:
Eth speed: 29.173 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #432dd006 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #b589f85a from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #93f0fd85 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #68ab5dc2 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #e8ef7f65 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Connecting to ethash pool ssl://us1.ethermine.org:5555 (proto: QtMiner)
Eth speed: 29.028 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #643f46f2 from us1.ethermine.org:4444; diff: 4000MH

*** 0:32 *** 2/12 15:59 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:32

DEVFEE then tries to disconnnect at 32, but errors out

Eth: Accepted shares 15 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.160 MH/s
Eth: Effective speed: 30.91 MH/s; at pool: 30.91 MH/s

DevFee: New job #b4c4ee4e from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #b4c4ee4e from us1.ethermine.org:4444; diff: 4000MH
DevFee: Disconnected and stopped
Eth speed: 29.127 MH/s, shares: 21/0/0, time: 0:55

Where did you downloaded phoenix miner. looks like you got from another source. delete all you got scan if you can make fresh windows install then download miner from 1st page.

The miner was downloaded from the first page,

batsonxl

member

Activity: 1201

Merit: 26

batsonxl

member

Activity: 1201

Merit: 26

Quote from: coinhunter142 on February 12, 2021, 10:32:01 PM

RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?

I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance

if you go 1-2 pages back you will find your answer

Kiawpqe

jr. member

Activity: 63

Merit: 1

Quote from: numbsoul on February 12, 2021, 09:34:25 PM

Thank you... i see here you are mining on ethermine? how to change it to binance pool and i can view its statistic in binance site?

Quote from: Kiawpqe on February 11, 2021, 01:23:32 PM

#
# PhoenixMiner configuration file
#
#
-rxboost 0,81,81,81,81,81,81,25
-gt 15,38,38,41,43,42,42,52
-rmode 1
-tt 50,60,60,60,60,60,60,48
-fanmin 30
-fanmax 100
-eres 100
-proto 3
-cdm 2
-hstats 2
-astats 1
-amd
-acm
-wdog 1
-gpow 100,100,100,100,100,100,100,100
-minRigSpeed 265
-coin eth
-clf 1
-clNew 1
-clKernel 1
-prate 0.135
-gpus 1,2,3,4,5,6,7,8
-cclock 1195,1190,1190,1200,1200,1200,1200,1200
-cvddc 793,853,853,855,850,850,850,750
-mclock 2110,2090,2090,2090,2113,2113,2113,1825
-mvddc 850,860,860,860,853,853,853,850
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
#GRAVIEX-WALLET
#-wal 0x7**********************************.32*******
#BINANCE-WALLET
-wal 0x7**********************************.32*******
-mt 0,0,0,0,0,0,0,0,1
#-pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444
#-wal YourEthWalletAddress.WorkerName
#-proto 3
#-cdm 2

Eth: New job #b575c3a7 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: 50C 43% 167W, GPU2: 60C 39% 88W, GPU3: 60C 40% 95W, GPU4: 57C 34% 86W, GPU5: 59C 33% 83W, GPU6: 60C 30% 82W, GPU7: 58C 30% 83W, GPU8: 47C 28% 90W
GPU1: cclock 1176 MHz, cvddc 793 mV, mclock 2098 MHz, Tj 55C
GPU2: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU3: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU4: cclock 1200 MHz, cvddc 862 mV, mclock 2090 MHz
GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 856 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU8: cclock 1159 MHz, cvddc 750 mV, mclock 1816 MHz, mvddc 850 mV, Tj 53C, Tmem 80C
GPUs power: 773.1 W; cost: 2.50 USD/day
Eth speed: 305.953 MH/s, shares: 1517/0/2, time: 5:28
GPUs: 1: 59.841 MH/s (312) 2: 32.312 MH/s (160) 3: 32.313 MH/s (152/1) 4: 32.281 MH/s (151) 5: 32.489 MH/s (175/1) 6: 32.489 MH/s (160) 7: 32.488 MH/s (163) 8: 51.741 MH/s (244)

-pool ethash.poolbinance.com:3333
or
-pool ethash.poolbinance.com:443
-pool ethash.poolbinance.com:25
-pool ethash.poolbinance.com:1800
-wal YourEthWalletAddress.WorkerName
-proto 2

tutorial of binance
https://www.binance.com/en/support/faq/9bd21a9536d74d1fb65c83f8e60ded93

coinhunter142

newbie

Activity: 23

Merit: 0

Quote from: leojoyms on February 12, 2021, 10:42:10 PM

Quote from: coinhunter142 on February 12, 2021, 10:32:01 PM

RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?

I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance

Use TeamRed Miner.

Awesome! TeamRed Miner solved the issue, GPU is now at 99%, still delivering 62 MH and Windows is fully operational again (for office work), which is exactly what I needed, so thanks a million! This is something both the Phoenixminer and Claymore need to catch up to.

leojoyms

newbie

Activity: 54

Merit: 0

Quote from: coinhunter142 on February 12, 2021, 10:32:01 PM

RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?

I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance

Use TeamRed Miner.

coinhunter142

newbie

Activity: 23

Merit: 0

RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?

I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance

numbsoul

newbie

Activity: 3

Merit: 0

Thank you... i see here you are mining on ethermine? how to change it to binance pool and i can view its statistic in binance site?

Quote from: Kiawpqe on February 11, 2021, 01:23:32 PM

#
# PhoenixMiner configuration file
#
#
-rxboost 0,81,81,81,81,81,81,25
-gt 15,38,38,41,43,42,42,52
-rmode 1
-tt 50,60,60,60,60,60,60,48
-fanmin 30
-fanmax 100
-eres 100
-proto 3
-cdm 2
-hstats 2
-astats 1
-amd
-acm
-wdog 1
-gpow 100,100,100,100,100,100,100,100
-minRigSpeed 265
-coin eth
-clf 1
-clNew 1
-clKernel 1
-prate 0.135
-gpus 1,2,3,4,5,6,7,8
-cclock 1195,1190,1190,1200,1200,1200,1200,1200
-cvddc 793,853,853,855,850,850,850,750
-mclock 2110,2090,2090,2090,2113,2113,2113,1825
-mvddc 850,860,860,860,853,853,853,850
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
#GRAVIEX-WALLET
#-wal 0x7**********************************.32*******
#BINANCE-WALLET
-wal 0x7**********************************.32*******
-mt 0,0,0,0,0,0,0,0,1
#-pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444
#-wal YourEthWalletAddress.WorkerName
#-proto 3
#-cdm 2

Eth: New job #b575c3a7 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: 50C 43% 167W, GPU2: 60C 39% 88W, GPU3: 60C 40% 95W, GPU4: 57C 34% 86W, GPU5: 59C 33% 83W, GPU6: 60C 30% 82W, GPU7: 58C 30% 83W, GPU8: 47C 28% 90W
GPU1: cclock 1176 MHz, cvddc 793 mV, mclock 2098 MHz, Tj 55C
GPU2: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU3: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU4: cclock 1200 MHz, cvddc 862 mV, mclock 2090 MHz
GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 856 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU8: cclock 1159 MHz, cvddc 750 mV, mclock 1816 MHz, mvddc 850 mV, Tj 53C, Tmem 80C
GPUs power: 773.1 W; cost: 2.50 USD/day
Eth speed: 305.953 MH/s, shares: 1517/0/2, time: 5:28
GPUs: 1: 59.841 MH/s (312) 2: 32.312 MH/s (160) 3: 32.313 MH/s (152/1) 4: 32.281 MH/s (151) 5: 32.489 MH/s (175/1) 6: 32.489 MH/s (160) 7: 32.488 MH/s (163) 8: 51.741 MH/s (244)

Toughit

full member

Activity: 378

Merit: 197

During the DevFee ‘storm’ my effective hash rate dropped from over 30 to 25. It is reflected in the pool. The miner showed 29.2 the entire time,

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 118. (Read 784958 times)