[POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com - page 100.

edonkey

legendary

Activity: 1150

Merit: 1004

Quote from: bexwhitt on April 10, 2014, 03:39:02 AM

Quote from: phzi on April 09, 2014, 07:38:00 PM

Quote from: bexwhitt on April 09, 2014, 06:41:18 PM

at the moment hashra contola does not allow backup pools so no.

Sounds like something weird with Hashra. Maybe try another controller like Scrypta to see if the problem still occurs?

Some other controller options: http://cryptomining-blog.com/1917-raspberry-pi-controller-images-with-gridseed-asic-support/

Scripta does not really work with gridseeds if you have more than a couple it keeps dropping the miners

I'm using the girnyau cgminer and the Scripta web frontend with 10 GridSeeds on my own Raspberry Pi image (not the Scripta image) and it's working. However I found that I had to disable the Scripta cron jobs or I would see USB disconnects with the GridSeeds.

Here's my post on the subject in case it's helpful:

https://bitcointalksearch.org/topic/m.6113466

ak111in

full member

Activity: 180

Merit: 1003

Quote from: bexwhitt on April 10, 2014, 03:47:26 AM

Is wafflestats down atm?

try www.wafflepoolmonitor.com for graphs.

rigrenter

newbie

Activity: 36

Merit: 0

What are your experiences with mining @wafflepool and using gridseed miners? Do you use diff higher then 512? Do you use cgminer of bfgminer? Thanks!

fair-cointeam

member

Activity: 70

Merit: 10

Quote from: bexwhitt on April 10, 2014, 03:47:26 AM

Is wafflestats down atm?

yes..
http://waffles.wilschrader.com/

bexwhitt

newbie

Activity: 50

Merit: 0

Is wafflestats down atm?

bexwhitt

newbie

Activity: 50

Merit: 0

Quote from: phzi on April 09, 2014, 07:38:00 PM

Quote from: bexwhitt on April 09, 2014, 06:41:18 PM

at the moment hashra contola does not allow backup pools so no.

Sounds like something weird with Hashra. Maybe try another controller like Scrypta to see if the problem still occurs?

Some other controller options: http://cryptomining-blog.com/1917-raspberry-pi-controller-images-with-gridseed-asic-support/

Scripta does not really work with gridseeds if you have more than a couple it keeps dropping the miners

golden0707

full member

Activity: 189

Merit: 100

Hi ! Could anyone please tell why there is no payouts for a couple of days. Ive started mining 2-3 days ago. Bitcoins earned (not yet sent): 0.01018845. I thought payments are several times a day. Isnt it ?

1HTgxSxA72oXp7wst4QvK8fwCoqqUkWfyF

Plz Help.

amit2007gunjan

sr. member

Activity: 378

Merit: 250

Quote from: amit2007gunjan on April 10, 2014, 12:18:47 AM

Hi ! Waffle Pool Recent Pay out status shows that payout of 0.01332286 on 2014-04-10 05:00:35, but i haven't received the pay out.

My user id is 1EeijSR9kPSfSzRPonEwxUxUzyNKrue9AT.

Admin, please help..

ok, i have got it just now. Thanks.

amit2007gunjan

sr. member

Activity: 378

Merit: 250

Hi ! Waffle Pool Recent Pay out status shows that payout of 0.01332286 on 2014-04-10 05:00:35, but i haven't received the pay out.

My user id is 1EeijSR9kPSfSzRPonEwxUxUzyNKrue9AT.

Admin, please help..

phzi

hero member

Activity: 700

Merit: 500

Quote from: bexwhitt on April 09, 2014, 06:41:18 PM

at the moment hashra contola does not allow backup pools so no.

Sounds like something weird with Hashra. Maybe try another controller like Scrypta to see if the problem still occurs?

Some other controller options: http://cryptomining-blog.com/1917-raspberry-pi-controller-images-with-gridseed-asic-support/

bexwhitt

newbie

Activity: 50

Merit: 0

Quote from: poolwaffle on April 09, 2014, 05:56:34 PM

Quote from: bexwhitt on April 09, 2014, 05:15:43 PM

My returns from the pool seem correct and my rejects seem reasonably low

just a quick question my log file keeps coming out with this

Apr 9 22:08:16 bfgminer[2396]: JSON-RPC non method decode failed: (null)
Apr 9 22:08:16 bfgminer[2396]: Unknown stratum msg: {"id":null,"result":[],"error":true}

Do you have any backup pools enabled that that could be coming from? We don't ever send those messages (at least we shouldn't)...

at the moment hashra contola does not allow backup pools so no.

poolwaffle

sr. member

Activity: 322

Merit: 254

Quote from: bexwhitt on April 09, 2014, 05:15:43 PM

My returns from the pool seem correct and my rejects seem reasonably low

just a quick question my log file keeps coming out with this

Apr 9 22:08:16 bfgminer[2396]: JSON-RPC non method decode failed: (null)
Apr 9 22:08:16 bfgminer[2396]: Unknown stratum msg: {"id":null,"result":[],"error":true}

Do you have any backup pools enabled that that could be coming from? We don't ever send those messages (at least we shouldn't)...

bexwhitt

newbie

Activity: 50

Merit: 0

My returns from the pool seem correct and my rejects seem reasonably low

just a quick question my log file keeps coming out with this

Apr 9 22:08:16 bfgminer[2396]: JSON-RPC non method decode failed: (null)

Apr 9 22:08:16 bfgminer[2396]: Unknown stratum msg: {"id":null,"result":[],"error":true}

is it any sort of problem?

http://waffles.wilschrader.com/stats?address=1CxNFa8uE2J1hYDb6FNASauoqEnd3fDjhd#

inductiveconcepts

newbie

Activity: 14

Merit: 0

Quote from: phzi on April 09, 2014, 01:06:05 PM

I would suggest adding a comment by the table saying something like, "% vs LTC is calculated by comparison to a PPS pool with 2% fee."

I second this suggestion.

malodin

newbie

Activity: 21

Merit: 0

Quote from: phzi on April 09, 2014, 01:06:05 PM

Quote from: malodin on April 09, 2014, 11:59:04 AM

@poolwaffle,

i was not saying there is a problem, i was only commenting that my hash rate changes via the website but not on cgminer similar to what rocks was saying. that depending upon the coin my reported hash rate on the website shows different than the reported hashrate on cgminer. I did not know about the WU difference.

That is the case with mining period - the pool can never know your exact hashrate, it can only approximate it based on the rate your miner is submitting shares. Small fluctuations like you are seeing will always occur, to everyone. The gridseed issue is a totally separate problem, where significant portions of hashrate appear to be 'lost'.

Quote from: poolwaffle on April 09, 2014, 10:12:08 AM

Edit: I also just realized our "vs LTC" includes the 2% fee we charge. It is based on what is actually earned by user accounts (and thus affected by our fee). I don't know which I feel is better for that column, and I'd like some input if possible. Essentially if we had a perfect (see conditions above) of mining only LTC, we would show 98% of LTC in that column (100% - 2% fee). Showing it with the fee included is more accurate, where "this is what you actually get", then again, if people are factoring the 2% into the calculation afterwards (since it isn't mentioned), it looks worse than it actually is.

Input?

I would suggest adding a comment by the table saying something like, "% vs LTC is calculated by comparison to a PPS pool with 2% fee."

phzi, thanks for that info.

phzi

hero member

Activity: 700

Merit: 500

Quote from: malodin on April 09, 2014, 11:59:04 AM

@poolwaffle,

i was not saying there is a problem, i was only commenting that my hash rate changes via the website but not on cgminer similar to what rocks was saying. that depending upon the coin my reported hash rate on the website shows different than the reported hashrate on cgminer. I did not know about the WU difference.

That is the case with mining period - the pool can never know your exact hashrate, it can only approximate it based on the rate your miner is submitting shares. Small fluctuations like you are seeing will always occur, to everyone. The gridseed issue is a totally separate problem, where significant portions of hashrate appear to be 'lost'.

Quote from: poolwaffle on April 09, 2014, 10:12:08 AM

Edit: I also just realized our "vs LTC" includes the 2% fee we charge. It is based on what is actually earned by user accounts (and thus affected by our fee). I don't know which I feel is better for that column, and I'd like some input if possible. Essentially if we had a perfect (see conditions above) of mining only LTC, we would show 98% of LTC in that column (100% - 2% fee). Showing it with the fee included is more accurate, where "this is what you actually get", then again, if people are factoring the 2% into the calculation afterwards (since it isn't mentioned), it looks worse than it actually is.

Input?

I would suggest adding a comment by the table saying something like, "% vs LTC is calculated by comparison to a PPS pool with 2% fee."

malodin

newbie

Activity: 21

Merit: 0

Quote from: Trestle on April 09, 2014, 11:47:29 AM

Quote from: malodin on April 09, 2014, 11:28:41 AM

regarding the hashrate drop on gridseeds

I do not have gridseeds, only 6 r9 270x cards and cgminer reports a constant 500-505 on all 6, this should come out to 3000-3030 hashrate, on wafflepool website my 15 minute hashrate shows 2.84-3.30MH/s, while my cgminer still shows 3.0MH/s

So i dont think it is a gridseed specific problem

What does you WU show. 3M Hashrate with a WU of 2.8M is 2.8M to the pool not 3M. The pool only counts the accepted work you submit.

WU= Work Utility correct?

my cgremote shows 455-462 on each card, thus about 2.7.

@Trestle, thanks for the explanation

@poolwaffle,

i was not saying there is a problem, i was only commenting that my hash rate changes via the website but not on cgminer similar to what rocks was saying. that depending upon the coin my reported hash rate on the website shows different than the reported hashrate on cgminer. I did not know about the WU difference.

poolwaffle

sr. member

Activity: 322

Merit: 254

Quote from: malodin on April 09, 2014, 11:28:41 AM

regarding the hashrate drop on gridseeds

I do not have gridseeds, only 6 r9 270x cards and cgminer reports a constant 500-505 on all 6, this should come out to 3000-3030 hashrate, on wafflepool website my 15 minute hashrate shows 2.84-3.30MH/s, while my cgminer still shows 3.0MH/s

So i dont think it is a gridseed specific problem

I'm confused. CGMiner tells you your hashrate is 3MHs, and on WP its between 2.84 and 3.3, of which the average is 3.07. Whats is the problem?

Trestle

member

Activity: 102

Merit: 10

Rockem Sockem

Quote from: malodin on April 09, 2014, 11:28:41 AM

regarding the hashrate drop on gridseeds

I do not have gridseeds, only 6 r9 270x cards and cgminer reports a constant 500-505 on all 6, this should come out to 3000-3030 hashrate, on wafflepool website my 15 minute hashrate shows 2.84-3.30MH/s, while my cgminer still shows 3.0MH/s

So i dont think it is a gridseed specific problem

What does you WU show. 3M Hashrate with a WU of 2.8M is 2.8M to the pool not 3M. The pool only counts the accepted work you submit.

malodin

newbie

Activity: 21

Merit: 0

regarding the hashrate drop on gridseeds

I do not have gridseeds, only 6 r9 270x cards and cgminer reports a constant 500-505 on all 6, this should come out to 3000-3030 hashrate, on wafflepool website my 15 minute hashrate shows 2.84-3.30MH/s, while my cgminer still shows 3.0MH/s

So i dont think it is a gridseed specific problem

Topic: [POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com - page 100. (Read 465769 times)