Is there a way to see your x13 stats (unconverted/earned/sent)?
edit: Nevermind, just took a little over 45 minutes to show up. All is well now.
Topic: [POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com - page 36. (Read 465710 times)
July 08, 2014, 10:35:34 AM
July 08, 2014, 07:36:08 AM
Profit is really low lately...
I've been mining scrypt in a multipool for the past 6 months, still with gpu's because i had no time to check if there were new algo's etc..
After i saw the profit go down more and more i decided to put some time in it again and change everything.
So i pointed my miners at waffle (X11 algo) "I also heard from several guys that the profit would go up again".
After mining for almost 24 hours, it seems that my profit is not going up, but down??
weird..
July 08, 2014, 07:32:04 AM
No kidding jump on X13 right now 
u cant expect PW to do it all use your head
u cant expect PW to do it all use your head July 08, 2014, 07:21:11 AM
July 08, 2014, 06:38:08 AM
Profit is really low lately...
July 08, 2014, 04:34:30 AM
wafflepool = no bs, no coverup ,easy and fast payment,best x11pool.
nicehash used to have better payouts . multi-algo killed it.
coinking is weird . every other day it is the best in poolpicker.in between the result is ugly. i got 0.003 for 8m x11.
clevermining is still slow on deploymenting new feature.
multi-panda is half dead.
nicehash used to have better payouts . multi-algo killed it.
coinking is weird . every other day it is the best in poolpicker.in between the result is ugly. i got 0.003 for 8m x11.
clevermining is still slow on deploymenting new feature.
multi-panda is half dead.
July 08, 2014, 01:25:44 AM
Wafflepoolmonitor Android App Update
Hi,
The android app has been updated to support scryptn, x11 and x13.
Thanks.
July 07, 2014, 08:17:03 PM
Can we just jump to x86 and be done? 
July 07, 2014, 06:48:12 PM
So what's next, X15 or joining payments together from different algorithms and paying together as I still have a little dust lying over from scrypt mining I wouldn't mind converting to my x11/x13 payout.
X15 next most likely, just the easiest step (been adding algos, already have it almost in testing). Then onto the merging of payouts (I know a lot of people are affected by this, just very small amounts actually affected).
Are there any plans to payout in anything beside bitcoin, like litecoin, ppc, drk, etc. Or are there any pools on the level of waffle that do that?
Yep, its still on the list of things to do, just doesn't have any sort of time-frame associated with it.
July 07, 2014, 05:44:09 PM
So what's next, X15 or joining payments together from different algorithms and paying together as I still have a little dust lying over from scrypt mining I wouldn't mind converting to my x11/x13 payout.
July 07, 2014, 03:55:30 PM
Are there any plans to payout in anything beside bitcoin, like litecoin, ppc, drk, etc. Or are there any pools on the level of waffle that do that?
July 07, 2014, 03:33:51 PM
Is there a way to get an e-mail notice if a miner has not sent anything for 15 minutes (or 1 hour)?
Nope. We very purposefully do not store email addresses, sorry
We provide apis with all of the data needed for something like this to be implemented however.
July 07, 2014, 03:27:24 PM
Is there a way to get an e-mail notice if a miner has not sent anything for 15 minutes (or 1 hour)?
July 07, 2014, 02:09:47 PM
Added a few more X13 coins today, and pushed X13 out of "beta" (now listed on the main site and no longer opt-in required)
July 07, 2014, 08:57:57 AM
A couple of weeks ago, I switched my GPUs from mining Scrypt to X11 (same bitcoin address). The WP Stats page shows that I still have Script Coins earned (not yet sent), and a few unconverted. How long until those are all paid out?
Scrypt X11 [All]
Sent 0.23148454 0.05441748 0.28590202
Earned (not yet sent) 0.00049581 0.00261623 0.00311204
Unconverted (approximate) 0.00001681 0.00048521 0.00050202
Earned+Unconverted 0.00051262 0.00310144 0.00361406
Total 0.23199716 0.05751892 0.28951608
Scrypt X11 [All]
Sent 0.23148454 0.05441748 0.28590202
Earned (not yet sent) 0.00049581 0.00261623 0.00311204
Unconverted (approximate) 0.00001681 0.00048521 0.00050202
Earned+Unconverted 0.00051262 0.00310144 0.00361406
Total 0.23199716 0.05751892 0.28951608
July 06, 2014, 02:59:22 PM
As a result I've a very low HW-Error rate and devices already start with "best" option.
I have very few HW Errors running @800MHZ and rejection rate is ok (it is between 3-5% mostly)
But when i switch @850MHZ then omg first errors within some minutes
Also found out that my Gridseeds (scrypt only) running much cooler @800MHZ, maybe i should just leave it there.
July 06, 2014, 01:36:08 PM
I usually start with 850 MHz in "autotune" mode, after a couple of hours I use the "save current frequencies" to generate the required miner option. Something like:
and finally I disable autotuning. As a result I've a very low HW-Error rate and devices already start with "best" option.
Code:
--gc3355-freq=8D7830995748:850:0,8D7830995748:900:1,8D7830995748:875:2,8D7830995748:875:3,8D7830995748:875:4,6D7024984857:850:0,6D7024984857:875:1,6D7024984857:900:2,6D7024984857:875:3,6D7024984857:850:4,6D73109C4853:875:0,6D73109C4853:900:1,6D73109C4853:875:2,6D73109C4853:875:3,6D73109C4853:875:4,6D74216E4853:825:0,6D74216E4853:875:1,6D74216E4853:825:2,6D74216E4853:900:3,6D74216E4853:875:4,6D75227D4853:850:0,6D75227D4853:850:1,6D75227D4853:850:2,6D75227D4853:875:3,6D75227D4853:850:4,6D6E25A74857:875:0,6D6E25A74857:875:1,6D6E25A74857:850:2,6D6E25A74857:875:3,6D6E25A74857:875:4,6D75216D4853:875:0,6D75216D4853:875:1,6D75216D4853:875:2,6D75216D4853:875:3,6D75216D4853:875:4,8D7230965748:875:0,8D7230965748:850:1,8D7230965748:850:2,8D7230965748:900:3,8D7230965748:875:4,6D7838894857:875:0,6D7838894857:875:1,6D7838894857:875:2,6D7838894857:875:3,6D7838894857:850:4,6D7635624857:875:0,6D7635624857:875:1,6D7635624857:875:2,6D7635624857:875:3,6D7635624857:875:4
July 06, 2014, 10:53:09 AM
Hi, to understand this little better technology wise.
First i had only 5 Gridseeds, now 11 Gridseeds with one RasBerry PI mining on wafflepool.
Before with 5 Gridseeds i was stable with 850 MHZ setting, now i can not go 850 MHZ anymore i would end up with a few hundered HW-Errors. It is other pools also.
With 800 MHZ its perfecly fine with very few Hardware Errors.
Has this to do because now the RasBerry must handle more Gridseeds now?
And how many Gridseeds my RasBerry could handle maximum? 20? (11 Now)
PS: I´m using hashra-image.
First i had only 5 Gridseeds, now 11 Gridseeds with one RasBerry PI mining on wafflepool.
Before with 5 Gridseeds i was stable with 850 MHZ setting, now i can not go 850 MHZ anymore i would end up with a few hundered HW-Errors. It is other pools also.
With 800 MHZ its perfecly fine with very few Hardware Errors.
Has this to do because now the RasBerry must handle more Gridseeds now?
And how many Gridseeds my RasBerry could handle maximum? 20? (11 Now)
PS: I´m using hashra-image.
Hi 5ick3uffalo,
I had something similar issues a while ago. Unfortunately there is no easy - go that way - answer.
Things I tried/changed with sucess:
- a reliable USB hub, may sound strange, but 3 out of 4 cheap ones didn't do the job very well in a 24x7 solution
- tried several PI solutions for Gridseed and finally found Minera (https://bitcointalksearch.org/topic/minera-v090-your-next-mining-dashboard-s9l3d3cpuminercgminerbfgminer-596620), based on CPUMiner
- Autotuning support for the Minis
- Autorestart of miner if a device stops
I'm more than happy with it, 24, 48h with <1% HW-Errors and <1% rejects. But it doesn't like some pools! - Added some additional safety lines to the PI system
- slub_debug=FP in /boot/cmdline.txt
- BMC2708 hardware watchdog, just in case
bye
Thanks
Before with 6 Gridseeds (where it was running stable @850MHZ) i used powered D-Link Hub (which many say is very good)
I bought a complete package (5 Gridseeds, all cables, industrial A/C) and it came with a LogiLink (UA0125) powered USB 2.0 8Port-HUB also ( paid 200 for everything, which i think was OK)
Not sure if this Logilink Hub is the culprit, i try the Minera Image first.
With 800Mhz it is running amazing, though. But i want it stable @850
I tried so many pools, but always come back to wafflepool
July 06, 2014, 10:34:27 AM
Hi, to understand this little better technology wise.
First i had only 5 Gridseeds, now 11 Gridseeds with one RasBerry PI mining on wafflepool.
Before with 5 Gridseeds i was stable with 850 MHZ setting, now i can not go 850 MHZ anymore i would end up with a few hundered HW-Errors. It is other pools also.
With 800 MHZ its perfecly fine with very few Hardware Errors.
Has this to do because now the RasBerry must handle more Gridseeds now?
And how many Gridseeds my RasBerry could handle maximum? 20? (11 Now)
PS: I´m using hashra-image.
First i had only 5 Gridseeds, now 11 Gridseeds with one RasBerry PI mining on wafflepool.
Before with 5 Gridseeds i was stable with 850 MHZ setting, now i can not go 850 MHZ anymore i would end up with a few hundered HW-Errors. It is other pools also.
With 800 MHZ its perfecly fine with very few Hardware Errors.
Has this to do because now the RasBerry must handle more Gridseeds now?
And how many Gridseeds my RasBerry could handle maximum? 20? (11 Now)
PS: I´m using hashra-image.
Hi 5ick3uffalo,
I had something similar issues a while ago. Unfortunately there is no easy - go that way - answer.
Things I tried/changed with sucess:
- a reliable USB hub, may sound strange, but 3 out of 4 cheap ones didn't do the job very well in a 24x7 solution
- tried several PI solutions for Gridseed and finally found Minera (https://bitcointalksearch.org/topic/minera-v090-your-next-mining-dashboard-s9l3d3cpuminercgminerbfgminer-596620), based on CPUMiner
- Autotuning support for the Minis
- Autorestart of miner if a device stops
I'm more than happy with it, 24, 48h with <1% HW-Errors and <1% rejects. But it doesn't like some pools! - Added some additional safety lines to the PI system
- slub_debug=FP in /boot/cmdline.txt
- BMC2708 hardware watchdog, just in case
bye
July 06, 2014, 09:50:34 AM
Hi, to understand this little better technology wise.
First i had only 5 Gridseeds, now 11 Gridseeds with one RasBerry PI mining on wafflepool.
Before with 5 Gridseeds i was stable with 850 MHZ setting, now i can not go 850 MHZ anymore i would end up with a few hundered HW-Errors. It is other pools also.
With 800 MHZ its perfecly fine with very few Hardware Errors.
Has this to do because now the RasBerry must handle more Gridseeds now?
And how many Gridseeds my RasBerry could handle maximum? 20? (11 Now)
PS: I´m using hashra-image.
First i had only 5 Gridseeds, now 11 Gridseeds with one RasBerry PI mining on wafflepool.
Before with 5 Gridseeds i was stable with 850 MHZ setting, now i can not go 850 MHZ anymore i would end up with a few hundered HW-Errors. It is other pools also.
With 800 MHZ its perfecly fine with very few Hardware Errors.
Has this to do because now the RasBerry must handle more Gridseeds now?
And how many Gridseeds my RasBerry could handle maximum? 20? (11 Now)
PS: I´m using hashra-image.
Jump to: