So i hooked up 5&6 and it crashes, pull the sixth card and system runs fine. Swaped the cards and tried again and still crashes the system so its either a video card driver or an issue with pci slot #6. Remove 6th cars and system works. I am going to try a powered riser on slot #6 and see if it helps(though it was fine on scrypt but maybe it has something to do with the way the power is handled on x11). For now my 4gb r9 270x gigabyte cards are running 12.5Mh/s avg on 5 cards, and i am pulling 650 watts compared to 1100 watts
One thing i have noticed is the stats page for my miner varies Mh/s drastically, while my miner never shows a drop less than from 2.8 to 2.5 per card, the page will show from like 8 to 15, is that odd for x11?
Topic: [POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com - page 39. (Read 465769 times)
July 02, 2014, 07:55:39 PM
July 02, 2014, 07:05:36 PM
I've noticed a possible problem with mining X13. I used the password field to set my difficulty to 0.160, but occasionally all of my miners will switch to 0.010 and begin spamming the server. It keeps doing this for quite some time, 5ish minutes or so.
I guess this could be a specific coin causing it since they all start and stop doing it at the same time. Of course, while typing this out it happened again, but only to two of my miners, so I guess that rules that out.
As the spammy .010 messages scrolled by I noticed this message right before the difficulty downshifted: "Stratum connection to pool 0 interrupted"
I don't think there's anything wrong with my internet connection, but I guess that could be something to look into. I'm using Pimp on my headless rigs, and sgminer_x11x13mod_03_06_2014 on my Windows machine.
I've been sitting and watching them now, they seem to only go back to the difficulty I've set once the network difficulty changes. I guess when a coin switch happens it goes back to normal.
I guess this could be a specific coin causing it since they all start and stop doing it at the same time. Of course, while typing this out it happened again, but only to two of my miners, so I guess that rules that out.
As the spammy .010 messages scrolled by I noticed this message right before the difficulty downshifted: "Stratum connection to pool 0 interrupted"
I don't think there's anything wrong with my internet connection, but I guess that could be something to look into. I'm using Pimp on my headless rigs, and sgminer_x11x13mod_03_06_2014 on my Windows machine.
I've been sitting and watching them now, they seem to only go back to the difficulty I've set once the network difficulty changes. I guess when a coin switch happens it goes back to normal.
July 02, 2014, 03:47:47 PM
wafflepool
I've got some unconverted x11 coins for some time now. Is there something wrong why those coins? Why are they not converted yet?
I've got some unconverted x11 coins for some time now. Is there something wrong why those coins? Why are they not converted yet?
There are a few blocks that I'm still working on figuring out what happened to (supercoin). We mined on the wrong fork, and had to roll back and reprocess blocks. I'm 99% sure they're orphan blocks that didn't get reprocessed correctly, but haven't had the time to dig through them all (unfortunately a very manual process).
Thanks for the quick reply!!!
July 02, 2014, 03:31:59 PM
wafflepool
I've got some unconverted x11 coins for some time now. Is there something wrong why those coins? Why are they not converted yet?
I've got some unconverted x11 coins for some time now. Is there something wrong why those coins? Why are they not converted yet?
There are a few blocks that I'm still working on figuring out what happened to (supercoin). We mined on the wrong fork, and had to roll back and reprocess blocks. I'm 99% sure they're orphan blocks that didn't get reprocessed correctly, but haven't had the time to dig through them all (unfortunately a very manual process).
July 02, 2014, 01:11:46 PM
wafflepool
I've got some unconverted x11 coins for some time now. Is there something wrong why those coins? Why are they not converted yet?
I've got some unconverted x11 coins for some time now. Is there something wrong why those coins? Why are they not converted yet?
July 02, 2014, 12:45:42 PM
i am running windows 8.1 with current rc2 beta drivers and cannot get more than 4 to be stable, though i have not tried since it have been running for the last 24hrs
Try BAMT, no issues with the 14.6 drivers and stable with 5 cards. What version of BAMT with the 14.6 drivers? I currently have 1.3 running super stable, and have upgraded my miner to the sgminer 5 beta (so I can mine all the algos). The missing thing for me is the latest at driver, and I was struggling trying to install it myself.
Did you download a version of BAMT with the 14.6 driver or did you install it yourself?
Here are the instructions I followed: http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/
Hope this helps!!
July 02, 2014, 12:34:39 PM
i am running windows 8.1 with current rc2 beta drivers and cannot get more than 4 to be stable, though i have not tried since it have been running for the last 24hrs
Try BAMT, no issues with the 14.6 drivers and stable with 5 cards. What version of BAMT with the 14.6 drivers? I currently have 1.3 running super stable, and have upgraded my miner to the sgminer 5 beta (so I can mine all the algos). The missing thing for me is the latest at driver, and I was struggling trying to install it myself.
Did you download a version of BAMT with the 14.6 driver or did you install it yourself?
July 02, 2014, 12:26:35 PM
Hello
any ideas why I don't see in the page the column bitcoin earnings for Scrypt-N ?
I have been mining for over an hour, I only have scrypt, but not scrypt-N.
the stats shows that I am mining nscrypt at 1MH steady
thanks
any ideas why I don't see in the page the column bitcoin earnings for Scrypt-N ?
I have been mining for over an hour, I only have scrypt, but not scrypt-N.
the stats shows that I am mining nscrypt at 1MH steady
thanks
July 02, 2014, 11:57:24 AM
i am running windows 8.1 with current rc2 beta drivers and cannot get more than 4 to be stable, though i have not tried since it have been running for the last 24hrs
Try BAMT, no issues with the 14.6 drivers and stable with 5 cards. July 02, 2014, 11:51:58 AM
i am running windows 8.1 with current rc2 beta drivers and cannot get more than 4 to be stable, though i have not tried since it have been running for the last 24hrs
July 02, 2014, 11:27:20 AM
i forget about the stats page once in a while. i checked and it looks like im right on track i suppose... now if i can get my other 2 cards running in this one machine
There are problems with 5+ cards on 14.6 RC2 ... see my testing thread many have found solutions with 14.4 with modified .INF for 14.4 installation and using .bin compiled with 14.6RC2.Are you running windows or Linux? I'm having no issues with my 5 cards rig.
July 02, 2014, 11:18:24 AM
i forget about the stats page once in a while. i checked and it looks like im right on track i suppose... now if i can get my other 2 cards running in this one machine
There are problems with 5+ cards on 14.6 RC2 ... see my testing thread many have found solutions with 14.4 with modified .INF for 14.4 installation and using .bin compiled with 14.6RC2.Are you running windows or Linux? I'm having no issues with my 5 cards rig.
July 02, 2014, 11:13:50 AM
i forget about the stats page once in a while. i checked and it looks like im right on track i suppose... now if i can get my other 2 cards running in this one machine
There are problems with 5+ cards on 14.6 RC2 ... see my testing thread many have found solutions with 14.4 with modified .INF for 14.4 installation and using .bin compiled with 14.6RC2. July 02, 2014, 11:01:38 AM
i forget about the stats page once in a while. i checked and it looks like im right on track i suppose... now if i can get my other 2 cards running in this one machine
July 02, 2014, 10:58:00 AM
Successfully got my x11 going with win 8.1 sph-sgminer x11/13 mod, only able to use 4 cards right now, but hashing at 10Mh/s, waffle pool shows about 8-9 average. i have been running for just shy of 24hrs and am wondering what my average return should be as i have only accumulated .002 in the last 19hrs or so.
Is this to be expected? when on normal scrypt my average daily payout was about .005 for a 24hr time period.
Is this to be expected? when on normal scrypt my average daily payout was about .005 for a 24hr time period.
Stats page lists avg per MHs for the last 7 days, check there
PW, having quite a bit of issues connecting my 280x @ x11 pool(sea.wafflepool.com). 
Sometime SGMiner reports host not found, and sometime other error. However I'm able to access the website without issues. Any idea what could be wrong? 
Sometime SGMiner reports host not found, and sometime other error. However I'm able to access the website without issues. Any idea what could be wrong? Different server clusters in different locations, one of them being up means nothing for the other being up (would be like saying "amazon is up, but google isn't"). That said, both of them should be fine and I don't show any problems on my end. Host Not Found might be a networking problem on your side (maybe a DNS lookup problem?)
It will take a day or two to stabilize, but Scrypt Profitability has taken a shit recently (past 24 hours) too.
Yep, whole Scrypt market is tanking pretty decently.
July 02, 2014, 10:34:54 AM
Successfully got my x11 going with win 8.1 sph-sgminer x11/13 mod, only able to use 4 cards right now, but hashing at 10Mh/s, waffle pool shows about 8-9 average. i have been running for just shy of 24hrs and am wondering what my average return should be as i have only accumulated .002 in the last 19hrs or so.
Is this to be expected? when on normal scrypt my average daily payout was about .005 for a 24hr time period.
Is this to be expected? when on normal scrypt my average daily payout was about .005 for a 24hr time period.
It will take a day or two to stabilize, but Scrypt Profitability has taken a shit recently (past 24 hours) too.
July 02, 2014, 09:15:37 AM
PW, having quite a bit of issues connecting my 280x @ x11 pool(sea.wafflepool.com). Sometime SGMiner reports host not found, and sometime other error. However I'm able to access the website without issues. Any idea what could be wrong?
Thanks
Sometime SGMiner reports host not found, and sometime other error. However I'm able to access the website without issues. Any idea what could be wrong? Thanks
July 02, 2014, 07:54:34 AM
Successfully got my x11 going with win 8.1 sph-sgminer x11/13 mod, only able to use 4 cards right now, but hashing at 10Mh/s, waffle pool shows about 8-9 average. i have been running for just shy of 24hrs and am wondering what my average return should be as i have only accumulated .002 in the last 19hrs or so.
Is this to be expected? when on normal scrypt my average daily payout was about .005 for a 24hr time period.
Is this to be expected? when on normal scrypt my average daily payout was about .005 for a 24hr time period.
July 02, 2014, 07:16:29 AM
after 10k blocks macdcoin goes to pos. currently 9106.
Hopefully PW has this coded into the coin switcher ...Yep, we're all set
July 02, 2014, 01:46:38 AM
after 10k blocks macdcoin goes to pos. currently 9106.
Hopefully PW has this coded into the coin switcher ... Jump to: