[RESURRECTION] Bringing Life to Growthcoin (GRW) , MADATORY UPDATE TO 1.3.0 - page 3.

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

Quote from: unick on June 01, 2014, 08:28:51 AM

Quote from: liteuser on June 01, 2014, 08:22:49 AM

I'm having some trouble to be in the same blockchain as grw.blockx.info. I'm assuming that the explorer is in the correct blockchain.

I'm running the last github version.

I've redownloaded the blockchain at least 5 or 6 times these past two days, but I always end in a wrong fork, even if I sometimes appear as connected in http://grw.blockx.info/connected-nodes and besides having around 15-20 nodes, most of them common, but some still using 1.2.1.

Sometimes I download the blockchain from the start or sometimes I use

Quote from: SolidStateSurvivor on May 31, 2014, 03:36:30 PM

http://grw.blockx.info/grw_blk_database_20140521.zip

but it is too old as it is before the fork. I had a backup at around the same block, too early.

Usually I end at around block 501426. This last time I've used a computer in a different subnet, using a new empty wallet.dat and with the list of nodes of grw.blockx.info in my config file. I'm now on block 508152 that is some 600 blocks longer.

Does anybody knows how to connect to the right fork? Or do you have a correct blockchain after block 50200 that can be downloaded? Is there any way to avoid the connection to version 1.2.1 nodes?

Thanks

yeah you are right, try this backup of the block chain http://grw.blockx.info/grw_blockchain_20140529.tar.gz

alternatively, did you try to start the client with the -rescan switch? might help to correct your forking issue

unick,i use win XP，can you upload the blockchain with .zip but not .gz ? i can not uncompress.
thank you.

ice00

sr. member

Activity: 296

Merit: 250

Quote from: unick on June 03, 2014, 09:01:26 AM

Quote from: ice00 on June 03, 2014, 03:24:43 AM

Is Allcoin up correctly?

I deposit yestreday GRW but it not yet counted (in wallet the amout was accepted by the network).

AFAIK, they were ok yesterday, I successfully sent some coins over there

did you get this sorted out? Maybe you should contact them

EDIT: successfuly sent some coins just now

I just open a ticket, maybe a throuble with my address

unick

sr. member

Activity: 504

Merit: 254

Quote from: dengnizaidongji on June 03, 2014, 09:38:51 AM

Quote from: liteuser on June 03, 2014, 08:50:34 AM

Quote from: dengnizaidongji on June 03, 2014, 07:27:25 AM

Quote from: liteuser on June 03, 2014, 07:23:24 AM

Quote from: dengnizaidongji on June 03, 2014, 07:05:00 AM

my connections is 13,but it doesnt sync yet,stop on 502749

Did you check with the explorer that the last blocks are in the right blockchain?

how to do it?

in the console or the command line: getblockhash 502749
and compare the result with http://grw.blockx.info/get/block/0000000094454c156b5401fcf10d134f09e0c100850297aeb52e74810a820f78
(in fact the hash is 0000000094454c156b5401fcf10d134f09e0c100850297aeb52e74810a820f78)

If the hash is the same, you should be in the same blockchain.

not the same.
should i retart to download the whole blockchain?

yes, check my previous message. Make sure to delete the blk*.dat files and the peers.dat file also

then start the application with connect=IP switch (or in the config) with some some IP (2-3 is fine) from nodes at http://grw.blockx.info/connected-nodes that run the version 1.3.0.0

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

Quote from: liteuser on June 03, 2014, 08:50:34 AM

Quote from: dengnizaidongji on June 03, 2014, 07:27:25 AM

Quote from: liteuser on June 03, 2014, 07:23:24 AM

Quote from: dengnizaidongji on June 03, 2014, 07:05:00 AM

my connections is 13,but it doesnt sync yet,stop on 502749

Did you check with the explorer that the last blocks are in the right blockchain?

how to do it?

in the console or the command line: getblockhash 502749
and compare the result with http://grw.blockx.info/get/block/0000000094454c156b5401fcf10d134f09e0c100850297aeb52e74810a820f78
(in fact the hash is 0000000094454c156b5401fcf10d134f09e0c100850297aeb52e74810a820f78)

If the hash is the same, you should be in the same blockchain.

not the same.
should i retart to download the whole blockchain?

unick

sr. member

Activity: 504

Merit: 254

Quote from: ice00 on June 03, 2014, 03:24:43 AM

Is Allcoin up correctly?

I deposit yestreday GRW but it not yet counted (in wallet the amout was accepted by the network).

AFAIK, they were ok yesterday, I successfully sent some coins over there

did you get this sorted out? Maybe you should contact them

EDIT: successfuly sent some coins just now

unick

sr. member

Activity: 504

Merit: 254

Quote from: she9888 on June 03, 2014, 01:53:22 AM

http://pan.baidu.com/s/1eQADOS6

http://pan.baidu.com/s/1jHBII

Look at my lost these coins can not get it back?

看看我丢失的这些币能找回来不？

wait before you are fully synced.

the coins are unavailable because they were not created at the beginning of the chain.

unick

sr. member

Activity: 504

Merit: 254

Quote from: dengnizaidongji on June 03, 2014, 07:27:25 AM

Quote from: liteuser on June 03, 2014, 07:23:24 AM

Quote from: dengnizaidongji on June 03, 2014, 07:05:00 AM

my connections is 13,but it doesnt sync yet,stop on 502749

Did you check with the explorer that the last blocks are in the right blockchain?

how to do it?

Looks like you will have to redownload the whole blockchain. that last block is on the fork and it wont be redownloaded by the client.

Do as liteuser says and try to start the client with the connect=IP switch selecting 2-3 ip from this table http://grw.blockx.info/connected-nodes

Before reconnecting, you need to:

delete the blk*.dat files
delete the peers.dat file

liteuser

full member

Activity: 145

Merit: 100

Quote from: dengnizaidongji on June 03, 2014, 07:27:25 AM

Quote from: liteuser on June 03, 2014, 07:23:24 AM

Quote from: dengnizaidongji on June 03, 2014, 07:05:00 AM

my connections is 13,but it doesnt sync yet,stop on 502749

Did you check with the explorer that the last blocks are in the right blockchain?

how to do it?

in the console or the command line: getblockhash 502749
and compare the result with http://grw.blockx.info/get/block/0000000094454c156b5401fcf10d134f09e0c100850297aeb52e74810a820f78
(in fact the hash is 0000000094454c156b5401fcf10d134f09e0c100850297aeb52e74810a820f78)

If the hash is the same, you should be in the same blockchain.

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

Quote from: liteuser on June 03, 2014, 07:23:24 AM

Quote from: dengnizaidongji on June 03, 2014, 07:05:00 AM

my connections is 13,but it doesnt sync yet,stop on 502749

Did you check with the explorer that the last blocks are in the right blockchain?

how to do it?

liteuser

full member

Activity: 145

Merit: 100

Quote from: dengnizaidongji on June 03, 2014, 07:05:00 AM

my connections is 13,but it doesnt sync yet,stop on 502749

Did you check with the explorer that the last blocks are in the right blockchain?

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

my connections is 13,but it doesnt sync yet,stop on 502749

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

Quote from: liteuser on June 03, 2014, 06:14:21 AM

Quote from: dengnizaidongji on June 03, 2014, 05:06:40 AM

when the blockchain arrived 502748,it stop syncing .i dont know why.the whole blockchain is 511040 now.

I had some problems syncing two days ago and I solved them using "connect=" instead of "addnode=" in the config file to make sure that I was only connecting to version 1.3 nodes (from http://grw.blockx.info/connected-nodes). My daemon kept connecting to some old nodes and using this allowed me to sync. After that, I removed the "connect" lines from the config.

You can check the nodes version by using getpeerinfo and looking at the subver key.

thank you,i will try

liteuser

full member

Activity: 145

Merit: 100

Quote from: dengnizaidongji on June 03, 2014, 05:06:40 AM

when the blockchain arrived 502748,it stop syncing .i dont know why.the whole blockchain is 511040 now.

I had some problems syncing two days ago and I solved them using "connect=" instead of "addnode=" in the config file to make sure that I was only connecting to version 1.3 nodes (from http://grw.blockx.info/connected-nodes). My daemon kept connecting to some old nodes and using this allowed me to sync. After that, I removed the "connect" lines from the config.

You can check the nodes version by using getpeerinfo and looking at the subver key.

burtnaked

newbie

Activity: 16

Merit: 0

Quote from: dengnizaidongji on June 03, 2014, 02:14:43 AM

Quote from: burtnaked on June 03, 2014, 01:41:54 AM

Quote from: dengnizaidongji on June 03, 2014, 12:49:15 AM

Quote from: burtnaked on June 03, 2014, 12:08:47 AM

updating to the new version has cause about 2k of my coins to not reappear once re-synced

is it a problem with minting?

you can use "repairwallet" to find your lost coins.i have try to do it.and received the lost coins.

do i just type "repairwallet" into the console?

yes.you can try.

thank you that has worked Cheesy

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

when the blockchain arrived 502748,it stop syncing .i dont know why.the whole blockchain is 511040 now.

and my wallet connections are 8.

ice00

sr. member

Activity: 296

Merit: 250

Is Allcoin up correctly?

I deposit yestreday GRW but it not yet counted (in wallet the amout was accepted by the network).

dengnizaidongji

sr. member

Activity: 266

Merit: 250

Colossuscoin - the future of payment methods

Quote from: burtnaked on June 03, 2014, 01:41:54 AM

Quote from: dengnizaidongji on June 03, 2014, 12:49:15 AM

Quote from: burtnaked on June 03, 2014, 12:08:47 AM

updating to the new version has cause about 2k of my coins to not reappear once re-synced

is it a problem with minting?

you can use "repairwallet" to find your lost coins.i have try to do it.and received the lost coins.

do i just type "repairwallet" into the console?

yes.you can try.

she9888

sr. member

Activity: 375

Merit: 250

http://pan.baidu.com/s/1eQADOS6

http://pan.baidu.com/s/1jHBII

Look at my lost these coins can not get it back?

看看我丢失的这些币能找回来不？

burtnaked

newbie

Activity: 16

Merit: 0

Quote from: dengnizaidongji on June 03, 2014, 12:49:15 AM

Quote from: burtnaked on June 03, 2014, 12:08:47 AM

updating to the new version has cause about 2k of my coins to not reappear once re-synced

is it a problem with minting?

you can use "repairwallet" to find your lost coins.i have try to do it.and received the lost coins.

do i just type "repairwallet" into the console?

she9888

sr. member

Activity: 375

Merit: 250

I do not know this new update my purse 80000 coins can not get it back,

Topic: [RESURRECTION] Bringing Life to Growthcoin (GRW) , MADATORY UPDATE TO 1.3.0 - page 3. (Read 34596 times)