i can not run the new wallet on my win XP。 
it says:error loading blkindex.dat.
it says:error loading blkindex.dat.
you need to delete your old blk0001.dat and blkindex.dat files and re-sync the wallet.
Topic: [RESURRECTION] Bringing Life to Growthcoin (GRW) , MADATORY UPDATE TO 1.3.0 - page 6. (Read 34596 times)
May 31, 2014, 09:46:36 AM
you need to delete your old blk0001.dat and blkindex.dat files and re-sync the wallet.
May 31, 2014, 09:45:12 AM
i can not run the new wallet on my win XP。
it says:error loading blkindex.dat.
it says:error loading blkindex.dat.
you need to redownload the whole blockchain. This new version requires a full reindex, but once is done, the client should load in about 20 seconds (and less)
So delete the blk0001.dat and blkindex.dat from your appdata folder
May 31, 2014, 09:31:01 AM
i can not run the new wallet on my win XP。
it says:error loading blkindex.dat.
it says:error loading blkindex.dat.
May 31, 2014, 08:44:07 AM
Believing that the dev is long gone and believing he'd ever return to release an update might have lost interest or has bigger projects to attend to and believe it was high time long time ago he did, yup everyone who's interested on GRW will need to update since already the network is stalled by the previous client , no mining , no sending or receiving , no confirmation of blocks , we've done some code updates to prevent negative Retargets in the future as per suggested almightyruler , he is credited for the same as well as getting mining fixed temporarily earlier and suggested and also predicted that the network will stall again if a proper update is not released as well as adopted.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
Is it the same Growthcoin or is a new launch which honours the existing balances?
OP is outdated, wallet version 1.2.1 is not compatible with current blockchain.
Current wallet version is 1.3.0
Source:
https://github.com/iamunick/growthcoin
Windows binary:
https://sourceforge.net/projects/philosopherstone/files/Misc_win32_qtclients/
https://www.dropbox.com/s/l3n8nanx83wt4la/GrowthCoin-1.3.0.BETA-win32.zip
Blockchain re-download is required.
i think we should change the downloadlink of the 1.3.0 wallet on the first page.
May 31, 2014, 07:25:55 AM
Believing that the dev is long gone and believing he'd ever return to release an update might have lost interest or has bigger projects to attend to and believe it was high time long time ago he did, yup everyone who's interested on GRW will need to update since already the network is stalled by the previous client , no mining , no sending or receiving , no confirmation of blocks , we've done some code updates to prevent negative Retargets in the future as per suggested almightyruler , he is credited for the same as well as getting mining fixed temporarily earlier and suggested and also predicted that the network will stall again if a proper update is not released as well as adopted.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
Is it the same Growthcoin or is a new launch which honours the existing balances?
Hi, yes it's the same growthcoin, exisiting balances is still valid
May 31, 2014, 07:02:24 AM
Believing that the dev is long gone and believing he'd ever return to release an update might have lost interest or has bigger projects to attend to and believe it was high time long time ago he did, yup everyone who's interested on GRW will need to update since already the network is stalled by the previous client , no mining , no sending or receiving , no confirmation of blocks , we've done some code updates to prevent negative Retargets in the future as per suggested almightyruler , he is credited for the same as well as getting mining fixed temporarily earlier and suggested and also predicted that the network will stall again if a proper update is not released as well as adopted.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
Is it the same Growthcoin or is a new launch which honours the existing balances?
OP is outdated, wallet version 1.2.1 is not compatible with current blockchain.
Current wallet version is 1.3.0
Source:
https://github.com/iamunick/growthcoin
Windows binary:
https://sourceforge.net/projects/philosopherstone/files/Misc_win32_qtclients/
https://www.dropbox.com/s/l3n8nanx83wt4la/GrowthCoin-1.3.0.BETA-win32.zip
Blockchain re-download is required.
May 31, 2014, 06:23:28 AM
Believing that the dev is long gone and believing he'd ever return to release an update might have lost interest or has bigger projects to attend to and believe it was high time long time ago he did, yup everyone who's interested on GRW will need to update since already the network is stalled by the previous client , no mining , no sending or receiving , no confirmation of blocks , we've done some code updates to prevent negative Retargets in the future as per suggested almightyruler , he is credited for the same as well as getting mining fixed temporarily earlier and suggested and also predicted that the network will stall again if a proper update is not released as well as adopted.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
New Wallet (Updated to version 1.2.1)
*Checkpoints Added
*Negative Retarget Fixed (courtesy of almightyruler)
*version Updates Posted
*Community Backed Development Announced
So all in all everyone who has GRW or is interested in the crypto , traders and everyone who has GRW on their wallets who were unable to anything before and wants to trade now will need to update.
Is it the same Growthcoin or is a new launch which honours the existing balances?
May 31, 2014, 05:59:03 AM
who can upload the new wallet on the dropbox.com?
i can not open the website. perhaps i use the win XP or i am in china.
thanks.
i can not open the website. perhaps i use the win XP or i am in china.
thanks.
dropbox link: https://www.dropbox.com/s/l3n8nanx83wt4la/GrowthCoin-1.3.0.BETA-win32.zip
thanks.noise23
May 31, 2014, 05:24:07 AM
who can upload the new wallet on the dropbox.com?
i can not open the website. perhaps i use the win XP or i am in china.
thanks.
i can not open the website. perhaps i use the win XP or i am in china.
thanks.
dropbox link: https://www.dropbox.com/s/l3n8nanx83wt4la/GrowthCoin-1.3.0.BETA-win32.zip
May 31, 2014, 03:26:26 AM
EDIT: Ice check your link structure
This
Code:
http://grw.blockx.info/get/block00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
should be this (notice the forward slash )
Code:
http://grw.blockx.info/get/block/00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
hi,
Thansks, now slash added.
I see that new windows client gets 11 connetions now, before I get 3 to max 5.
Wallet for server coins moving into one is at 53% of loading. It needs some more hours to be able to reactivate payout.
May 30, 2014, 10:15:07 PM
who can upload the new wallet on the dropbox.com?
i can not open the website. perhaps i use the win XP or i am in china.
thanks.
i can not open the website. perhaps i use the win XP or i am in china.
thanks.
May 30, 2014, 05:24:49 PM
This block on ice's pool: http://grw.multi-pool.info/index.php?page=statistics&action=round&height=504286
Does not show up here: http://grw.blockx.info/get/block00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
Neither does the previous block, from yesterday: http://grw.blockx.info/get/block0000000038e27d61a6bc00eb0b756fcbbc063d43e343fad48c4b08393caca698
Does not show up here: http://grw.blockx.info/get/block00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
Neither does the previous block, from yesterday: http://grw.blockx.info/get/block0000000038e27d61a6bc00eb0b756fcbbc063d43e343fad48c4b08393caca698
There was double blocks on the explorer, I did a rescan and I couldn't get that straightened out. I ended up flushing the database and reloading it.
The process is still 12 days out so that's why the TX is not showing from yesterday, maybe another 15 minutes to catch up
EDIT : It's all done
EDIT: Ice check your link structure
This
Code:
http://grw.blockx.info/get/block00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
should be this (notice the forward slash )
Code:
http://grw.blockx.info/get/block/00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
*Facepalm* Why didn't I see that.
May 30, 2014, 04:23:06 PM
Well I really don't understand what is going on with your issue or what you are trying to say.
You must have some kind of trace if not how can you say that you mined some blocks if they are invisible?!?
Be more specific with your issue or try to post some kind of log so we can track this down.
You must have some kind of trace if not how can you say that you mined some blocks if they are invisible?!?
Be more specific with your issue or try to post some kind of log so we can track this down.
I saw rejected block found then accepted block found twice on cgminer, but nothing about these accepted on the wallet.
"synccheckpoint" : "00000000714aa1e342010684d655b3c5e1ad8585662dd301af5bbf6e460154a5",
"height" : 504411,
"timestamp" : "2014-05-30 21:09:36 UTC",
"policy" : "strict"
ok, while I better understand your situation, I still cannot pin point the issue from here. Maybe it's related to your cgminer configs, if you have other pools configured, maybe your rig was doing work for those pools.
if you solo mine, try setting a higher queue in your settings. This could solve the issue, especially if you have a message saying that you don't get work provided fast enough
May 30, 2014, 04:21:31 PM
Hey guys here are the new commits to the source.
I activated the DNS seeds witch greatly improves the get connection time when the client is freshly installed or the peers.dat file deleted. I managed to get connected within seconds with a fresh install... no config file to mess with
I have setup a dns seed host (seed.grw.blockx.info). I plan to make it an automated process so the host can scan for good nodes to connect to in realtime.
If someone wants to host another dns seed host for redundancy please do so. send me the link and I will add it to the source.
If you can setup a static node, that will also be a great addition for the network.
I activated the DNS seeds witch greatly improves the get connection time when the client is freshly installed or the peers.dat file deleted. I managed to get connected within seconds with a fresh install... no config file to mess with
I have setup a dns seed host (seed.grw.blockx.info). I plan to make it an automated process so the host can scan for good nodes to connect to in realtime.
If someone wants to host another dns seed host for redundancy please do so. send me the link and I will add it to the source.
If you can setup a static node, that will also be a great addition for the network.
I can host DNS seed host but need some directions how to setup it properly - never did it before
Already run two GRW static nodes on my servers.
The quick and dirty way is to manually add ip addresses of connected nodes of the network using the default port 17177, to the A records of an address (seed.growthco.in for instance)
The more proper way would be to setup https://github.com/iamunick/bitcoin-seeder on a server so it can scan periodically the network and return active nodes.
you can check these 2 repositories to find out the changes made to the bitcoin-seeder so it listen on the correct network.
https://github.com/JoiBlumen/auroracoin-seeder
https://github.com/Bushstar/worldcoin-seeder
Just finished setting up Growthcoin seeder at seed1.grw.acidpool.com
Here is the source edited for Growthcoin: https://github.com/noise23/growthcoin-seeder
It accepts only version 60007+ peers/nodes to cut off old forked versions.
With every dns request it returns about a half of found peers in random order.
It's up and running now so you can add it as another dns seed host
Excellent Job Noise
added it to the source https://github.com/iamunick/growthcoin/commit/c3185e22b3c106108e0711f2ccc07d0454deba46
and post your GRW address, I'll send you a little something
it's GZV1aE3Fn8FEzfxPQ7EYU3Q4dQT7YCuJB3
Thanks!
May 30, 2014, 04:05:20 PM
Well I really don't understand what is going on with your issue or what you are trying to say.
You must have some kind of trace if not how can you say that you mined some blocks if they are invisible?!?
Be more specific with your issue or try to post some kind of log so we can track this down.
You must have some kind of trace if not how can you say that you mined some blocks if they are invisible?!?
Be more specific with your issue or try to post some kind of log so we can track this down.
I saw rejected block found then accepted block found twice on cgminer, but nothing about these accepted on the wallet.
"synccheckpoint" : "00000000714aa1e342010684d655b3c5e1ad8585662dd301af5bbf6e460154a5",
"height" : 504411,
"timestamp" : "2014-05-30 21:09:36 UTC",
"policy" : "strict"
May 30, 2014, 04:03:26 PM
Hey guys here are the new commits to the source.
I activated the DNS seeds witch greatly improves the get connection time when the client is freshly installed or the peers.dat file deleted. I managed to get connected within seconds with a fresh install... no config file to mess with
I have setup a dns seed host (seed.grw.blockx.info). I plan to make it an automated process so the host can scan for good nodes to connect to in realtime.
If someone wants to host another dns seed host for redundancy please do so. send me the link and I will add it to the source.
If you can setup a static node, that will also be a great addition for the network.
I activated the DNS seeds witch greatly improves the get connection time when the client is freshly installed or the peers.dat file deleted. I managed to get connected within seconds with a fresh install... no config file to mess with
I have setup a dns seed host (seed.grw.blockx.info). I plan to make it an automated process so the host can scan for good nodes to connect to in realtime.
If someone wants to host another dns seed host for redundancy please do so. send me the link and I will add it to the source.
If you can setup a static node, that will also be a great addition for the network.
I can host DNS seed host but need some directions how to setup it properly - never did it before
Already run two GRW static nodes on my servers.
The quick and dirty way is to manually add ip addresses of connected nodes of the network using the default port 17177, to the A records of an address (seed.growthco.in for instance)
The more proper way would be to setup https://github.com/iamunick/bitcoin-seeder on a server so it can scan periodically the network and return active nodes.
you can check these 2 repositories to find out the changes made to the bitcoin-seeder so it listen on the correct network.
https://github.com/JoiBlumen/auroracoin-seeder
https://github.com/Bushstar/worldcoin-seeder
Just finished setting up Growthcoin seeder at seed1.grw.acidpool.com
Here is the source edited for Growthcoin: https://github.com/noise23/growthcoin-seeder
It accepts only version 60007+ peers/nodes to cut off old forked versions.
With every dns request it returns about a half of found peers in random order.
It's up and running now so you can add it as another dns seed host
Excellent Job Noise
added it to the source https://github.com/iamunick/growthcoin/commit/c3185e22b3c106108e0711f2ccc07d0454deba46
and post your GRW address, I'll send you a little something
May 30, 2014, 03:40:31 PM
Hey guys here are the new commits to the source.
I activated the DNS seeds witch greatly improves the get connection time when the client is freshly installed or the peers.dat file deleted. I managed to get connected within seconds with a fresh install... no config file to mess with
I have setup a dns seed host (seed.grw.blockx.info). I plan to make it an automated process so the host can scan for good nodes to connect to in realtime.
If someone wants to host another dns seed host for redundancy please do so. send me the link and I will add it to the source.
If you can setup a static node, that will also be a great addition for the network.
I activated the DNS seeds witch greatly improves the get connection time when the client is freshly installed or the peers.dat file deleted. I managed to get connected within seconds with a fresh install... no config file to mess with
I have setup a dns seed host (seed.grw.blockx.info). I plan to make it an automated process so the host can scan for good nodes to connect to in realtime.
If someone wants to host another dns seed host for redundancy please do so. send me the link and I will add it to the source.
If you can setup a static node, that will also be a great addition for the network.
I can host DNS seed host but need some directions how to setup it properly - never did it before
Already run two GRW static nodes on my servers.
The quick and dirty way is to manually add ip addresses of connected nodes of the network using the default port 17177, to the A records of an address (seed.growthco.in for instance)
The more proper way would be to setup https://github.com/iamunick/bitcoin-seeder on a server so it can scan periodically the network and return active nodes.
you can check these 2 repositories to find out the changes made to the bitcoin-seeder so it listen on the correct network.
https://github.com/JoiBlumen/auroracoin-seeder
https://github.com/Bushstar/worldcoin-seeder
Just finished setting up Growthcoin seeder at seed1.grw.acidpool.com
Here is the source edited for Growthcoin: https://github.com/noise23/growthcoin-seeder
It accepts only version 60007+ port 17177 nodes to cut off old forked versions.
With every dns request it returns about a half of found peers in random order.
It's up and running now so you can add it as another dns seed host
May 30, 2014, 03:30:02 PM
I solo mine and my last found blocks accepted invisible in the wallet.
Invisible or Orphaned ?
Orphan -> visible
Invisible -> invisible
Am I wrong ?
Well I really don't understand what is going on with your issue or what you are trying to say.
You must have some kind of trace if not how can you say that you mined some blocks if they are invisible?!?
Be more specific with your issue or try to post some kind of log so we can track this down.
May 30, 2014, 03:20:10 PM
I solo mine and my last found blocks accepted invisible in the wallet.
Invisible or Orphaned ?
Orphan -> visible
Invisible -> invisible
Am I wrong ?
May 30, 2014, 03:19:06 PM
This block on ice's pool: http://grw.multi-pool.info/index.php?page=statistics&action=round&height=504286
Does not show up here: http://grw.blockx.info/get/block00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
Neither does the previous block, from yesterday: http://grw.blockx.info/get/block0000000038e27d61a6bc00eb0b756fcbbc063d43e343fad48c4b08393caca698
Does not show up here: http://grw.blockx.info/get/block00000000bb7709eb443cf1e9a7d5a2c6111a0957c696457c39ce5f50c94dcf59
Neither does the previous block, from yesterday: http://grw.blockx.info/get/block0000000038e27d61a6bc00eb0b756fcbbc063d43e343fad48c4b08393caca698
There was double blocks on the explorer, I did a rescan and I couldn't get that straightened out. I ended up flushing the database and reloading it.
The process is still 12 days out so that's why the TX is not showing from yesterday, maybe another 15 minutes to catch up
Ahh, so it's all fixed then, what block are we on now, for real? 504,343
yes we are at "blocks" : 504343,
Jump to: