What if u put it in a portable fridge and add inlet and exhaust or only external fan on inlet. Would that work?
If you mean something like in this video, it could work out. https://www.youtube.com/watch?v=QfMrOjezl7k
Topic: (Review/Guide) WhatsMiner M3 11.5 Th/s, 2000W Bitcoin (SHA-256) ASIC miner - page 14. (Read 33534 times)
December 02, 2017, 12:57:12 PM
If you mean something like in this video, it could work out. https://www.youtube.com/watch?v=QfMrOjezl7k
December 02, 2017, 12:54:16 PM
What if u put it in a portable fridge and add inlet and exhaust or only external fan on inlet. Would that work?
December 02, 2017, 12:41:54 PM
Nah. I only need it for one miner. Can i do it with different sound insulation or styrofoam?
yes get the smaller size
https://www.homedepot.com/p/UltraTouch-48-in-x-6-ft-Radiant-Barrier-30000-11406/100656748
and this fire blanket
https://www.amazon.com/Emergency-survival-Fiberglass-Blanket-fireplace/dp/B071744PRN/ref=sr_1_1_sspa?
use a piece of plywood
https://www.homedepot.com/p/Underlayment-Common-7-32-in-x-4-ft-x-8-ft-Actual-0-196-in-x-48-in-x-96-in-431178/203183010
make it 1 ft by 6 ft four pieces
you have a left over piece 2 ft by 4 foot.
the 4 long pieces make a U shape line with the liner you will have a left over piece of liner use that for the top board.
the box will be 1 ft by 1 ft by 6 foot the inside will be 11 inches by 11 inches it will fit the miner and the psu.
December 02, 2017, 11:55:03 AM
Nah. I only need it for one miner. Can i do it with different sound insulation or styrofoam?
December 02, 2017, 11:47:52 AM
So you only left the sides open? And you used insulation foam right?
six sided rectangle with 2 ends open
the main sound deadner is this
https://www.homedepot.com/p/UltraTouch-48-in-x-6-ft-Radiant-Barrier-30000-11406/100656748
below for short proofing and fire resistant
https://www.amazon.com/Emergency-survival-Fiberglass-Blanket-fireplace/dp/B071744PRN/ref=sr_1_1_sspa?
if you build six feet long and 30 inches wide 1 foot tall you can do 3 s-9's or 3 whatsminer m3's
December 02, 2017, 10:25:43 AM
So you only left the sides open? And you used insulation foam right?
December 02, 2017, 10:21:08 AM
So in theory we can get a quieter 200cfm fan?
Loud loud loud loud loud.
and hot hot hot.
these need lots of air flow with good air pressure. do not alter fans.
sound proof videos for loud hot miners on my youtube channel
https://www.youtube.com/watch?v=6soWakwmK5M
https://www.youtube.com/watch?v=THQHtFPkzuk
https://www.youtube.com/watch?v=8X15H0qLNyI
https://www.youtube.com/watch?v=thH3vMx28RM
https://www.youtube.com/watch?v=DySrCBras3w
https://www.youtube.com/watch?v=QbH79FdVxpE
https://www.youtube.com/watch?v=M-9sGDZAWEM
https://www.youtube.com/watch?v=_Mqxy28jPvw
https://www.youtube.com/watch?v=hlB5LikKeiw
these will lower the sound 12-15 db and not restrict air flow.
December 02, 2017, 08:32:31 AM
So in theory we can get a quieter 200cfm fan?
No, you can't quiet down this miner by changing a fan. Sorry.It produces a lot of heat and needs a high level of cooling.
December 02, 2017, 08:29:51 AM
So in theory we can get a quieter 200cfm fan?
December 02, 2017, 08:16:27 AM
Hello Everyone,
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
How about CFM value for each fan ?
they must be close to 200 cfm
I agree, if it is anything close to like the 6000rpm Delta fan model "QFR1212GHE",
when it comes to the technical specifications.
I tried to search for a data sheet for the KZ12038B012X fan, which the WhatsMiner has both in front and rear,
but I was unable to find anything.
Delta QFR1212GHE has a max airflow value of 210.4 CFM.
https://www.digikey.com/product-detail/en/delta-electronics/QFR1212GHE-SP01/603-1165-ND/1850534
November 29, 2017, 08:39:44 AM
Hello Everyone,
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
How about CFM value for each fan ?
they must be close to 200 cfm
November 29, 2017, 08:22:35 AM
I updated the review post (the opening post) with the disassembly session and pictures I did back in November 20.
November 29, 2017, 08:12:06 AM
Hello Everyone,
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
How about CFM value for each fan ?
November 29, 2017, 04:29:00 AM
During Summer the RPM should be around 4700~5500
November 29, 2017, 04:06:04 AM
Hello Everyone,
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
The normal temperature for whatsminer m3 is under 84 degree.
During Winter time, FANS rpm should be around 4,000
November 28, 2017, 08:43:51 PM
Hi . I have bought one . But i have problem in this miner it reboot automatically after few minutes and never reach 9.3th . Also the fans speed are too slow its 1290 in , so the temperature adjust to over 80C and then after few minutes it shut down and reebot automatically . Whats the problem with this whatsminer M3 ??
I had the same issue with mine, I’ve added a vent bracket and a direct 3m duct outside, this has solved the shutdown issues, it’s still running at 83degrees, 11.5/th
yes it needed the air flow.
I had mine in a very cool place no issues about doing 11th.
November 28, 2017, 12:26:02 PM
November 28, 2017, 12:22:54 PM
Hi . I have bought one . But i have problem in this miner it reboot automatically after few minutes and never reach 9.3th . Also the fans speed are too slow its 1290 in , so the temperature adjust to over 80C and then after few minutes it shut down and reebot automatically . Whats the problem with this whatsminer M3 ??
I had the same issue with mine, I’ve added a vent bracket and a direct 3m duct outside, this has solved the shutdown issues, it’s still running at 83degrees, 11.5/th
November 28, 2017, 07:43:22 AM
2000 Watt is too much for 11.5 TH
I can buy these miners if they need less power than 1400 Watt.
They’re trying to make the miner near the hashpower of the S9 but the major issue is that the chips are 28nm and it’s nearly as efficient as it can be on that platform. Mostly just the limitations of the node for power. I can buy these miners if they need less power than 1400 Watt.
Jump to: