(Review/Guide) WhatsMiner M3 11.5 Th/s, 2000W Bitcoin (SHA-256) ASIC miner - page 2.

theghost1980

member

Activity: 67

Merit: 10

Truth is Only one - La verdad es solo Una -

Quote from: HagssFIN on November 14, 2018, 08:30:58 AM

As far as I know, it is unfortunately not possible to change the hash board settings.

The settings are done automatically during the miner startup process.

Thanks for answering to me. I have connected the miner right here just to monitor its behaviour:

https://www.nicehash.com/miner/36rHPy9vRi6YMrbUZxX495VmAXutgmiW88

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

As far as I know, it is unfortunately not possible to change the hash board settings.

The settings are done automatically during the miner startup process.

theghost1980

member

Activity: 67

Merit: 10

Truth is Only one - La verdad es solo Una -

Quote from: minefarmbuy on October 27, 2018, 04:53:06 PM

You can contact our info line for options since this thread should be based on the M3 not reference other asics. Or simply start a thread in mining support for questions you have.

**Important UPDATE**

After some weeks of many phone calls, emails and discussions I have received my miner. So my finals conclusion about this Company are:

1. They have made a great effort to help me find solution to receive the miner in Venezuela.
2. DHL in Venezuela is working good also but I will contact them to get a straight answer to bring more miners In. As soon as I can get this written by them, I will share this so many other venezuelans can use the legit shipment service.
3. Today I will put to work the Miner into a new nice hash address. The purpose of this is to measure his Hashrate in a monthly basis from now. I want to review this equipment so I can warranty is working good and its Hashrate is as stable as the Bitmain.

So far so good. After receiving the miner I can say pangolinminer.com is a good place to buy miners.

Thanks for your attention.

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

You can contact our info line for options since this thread should be based on the M3 not reference other asics. Or simply start a thread in mining support for questions you have.

theghost1980

member

Activity: 67

Merit: 10

Truth is Only one - La verdad es solo Una -

Quote from: ?? on ??

Hey guys,

i live in a country with a super low electricity cost about 0.004 USD/kwh so electricity cost is not important for me, considering this i am thinking of buying about 10 units of M3s to start mining mainly because of its low price ( i can buy 10 units for 1,600 USD) , but i have one big concern which is the old technology of this miner, i would like to know if i can use this hardware for like 15 to 24 months? as per my calculations its ROI would be about 272 days with increasing hash rate difficulty of 7% per month, considering this do you recommend my plan, i would appreciate if you could challenge me or give me your advice/solutions.

also i have a warehouse to install them so noise is not an issue for me.

needles to say that i am a noob in mining. Grin

thank you in advance.

Hi there Pooya. I have a friend here in my country who is using this model M3. He told me the following:

1. It tends to break the hash rate too often. He showed me data of the miner going from very high rate to very low hash rate.
2. It consumes a lot of power, much more than an Antminer of the same capabilities.

For those 2 reasons I have decided not to buy those. I will keep using Bitmain.

One more thing. One of the official resellers of this Whatsminer brand is the people of Pangolinminer. Recently I tried to do business with them and my experiencia it was very bad so I do not recommend them. Use another reseller or try to contact the manufacturer in CHINA.

PEACE out and BITCOIN ON.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Perhaps try reading the damn thread? 1st post lists what you want along with this https://pangolinminer.com/product/whatsminer-m10/ at the top of *this* page... That dot-com is the ONLY web address to trust.

theghost1980

member

Activity: 67

Merit: 10

Truth is Only one - La verdad es solo Una -

Quote from: HagssFIN on January 11, 2018, 11:29:23 AM

Quote from: Pangolinminer on January 11, 2018, 11:14:30 AM

Hello,

This is Pangolinminer Team.

We here claim we don't have any relationship with pangolinsales.com

Please be careful of them. Since we found they scraping content directly from our website. You can see as below:

And it is very funny for them to do so, as they also copied our warning about replicate site

Pangolinminer :

https://drive.google.com/open?id=1almVjgH982apNjo24b50_8hRsjUOTh6X

Pangolinsales : (suspicious):

https://drive.google.com/open?id=1p-bKs0PZAorExZRSWZsH3ivxIYnESOuf

Yeah, scammers are a real pain in the ass.

DO NOT ORDER FROM THIS WEB ADDRESS: PANGOLINSALES.COM
THEY ARE SCAMMERS.

THE ONLY OFFICIAL WEB SHOP IS IN THIS WEB ADDRESS: WWW.PANGOLINMINER.COM

Hello there. I know this is a very old thread but I would like to know the following:

1. Is the M3 being manufactured by https://whatsminer.net/?
2. Is the M3 miners being sold for the US territory by https://pangolinminer.com?

Basically I would like to buy but I need to be sure that Whatsminer.net is the factory in China because it looks that they have bigger stock. Thanks for your time.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I was contacted today about a preorder of a m10.

I reminded sales I am due a demo of the m10.

Last December or November I had a m3 demo. which I paid for in advance.

I did multiple you-tube videos of it.

I will see what they say as I would like to show a demo for buyers to decide if it is worth buying.

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

Quote from: HagssFIN on August 13, 2018, 11:53:39 AM

This one can needs all the cooling it can get. I would not try to lower the fan speed.

And the GUI doesn't allow changing the fan speed

getting into winter so was thinking to use the cold air.

anyone know about this firmwares ?
https://github.com/zurylostboys/WhatsMiner-firmware/releases/tag/v1.0

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

This one can needs all the cooling it can get. I would not try to lower the fan speed.

And the GUI doesn't allow changing the fan speed

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

can we set down the fan speeds for lower noise?, 80% could do alot of change.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Nope,
I don't own a M3 anymore.

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

HagssFIN, did you by chance test their firmware release from this month?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: HagssFIN on July 25, 2018, 11:29:29 AM

This was confirmed more quick than I thought.

Me and Philip will do a review for the WhatsMiner M10.
Philip will do videos like he mentioned and I will do a review document as usual.

Nice I will pm my email info to you

and address info to you.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

This was confirmed more quick than I thought.

Me and Philip will do a review for the WhatsMiner M10.
Philip will do videos like he mentioned and I will do a review document as usual.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: HagssFIN on July 25, 2018, 10:17:49 AM

Phil I answered your pm.

I have talked about this earlier with Laurent from Pangolinminer,
but I'm not sure if it will happen. I will let you guys know when I know more about it.

I would love to get one for the solar array and do a few youtube videos on it.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: philipma1957 on July 25, 2018, 09:04:45 AM

Haggs

will you be getting the m10?

https://pangolinminer.com/product/whatsminer-m10/

Phil I answered your pm.

I have talked about this earlier with Laurent from Pangolinminer,
but I'm not sure if it will happen. I will let you guys know when I know more about it.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Haggs

will you be getting the m10?

https://pangolinminer.com/product/whatsminer-m10/

Shazam!!!

full member

Activity: 350

Merit: 158

#takeminingback

Quote from: mohy66 on July 13, 2018, 11:56:03 PM

Hi there,
I have a problem with one of my miners(Whatsminer M3) is showing 0 for fan speed in, and therefor fan speed out is 6300 which is upper than normal and for that hash rate is lower than usual.

but the fan is working(maybe is working because of out fan air flow!, I' don't know, i cant count the speed Cheesy

).

I replace the fan with another working fan but nothing changed(fans speed in = 0);

I load the firmware again with sd card but nothing changed(fans speed in = 0);

How can i fix this issue?
Should i turn off my miner in this status until the fan works again?

please help me,
Regards

First off, why is everyone suddenly messing with the firmware on these??? They are not Halong Dragonmint firmware bingo machines.
Usually, when a fan speed error occurs, it's generally not a firmware issue. Most of the time it's a controller/fan issue. However, with as
many problems people have with Pangolinminer psu's, try swapping it for another, to see if there's a difference. It could be the
controller isn't getting full power. As always, open a support ticket with Pangolinminer. Goodluck!!!

mohy66

newbie

Activity: 1

Merit: 0

Hi there,
I have a problem with one of my miners(Whatsminer M3) is showing 0 for fan speed in, and therefor fan speed out is 6300 which is upper than normal and for that hash rate is lower than usual.

but the fan is working(maybe is working because of out fan air flow!, I' don't know, i cant count the speed Cheesy

).

I replace the fan with another working fan but nothing changed(fans speed in = 0);

I load the firmware again with sd card but nothing changed(fans speed in = 0);

How can i fix this issue?
Should i turn off my miner in this status until the fan works again?

please help me,
Regards

corrupted miner:
https://pasteboard.co/HumQ2OD.png

Normal Miner:
https://pasteboard.co/HumRqCU.png

Topic: (Review/Guide) WhatsMiner M3 11.5 Th/s, 2000W Bitcoin (SHA-256) ASIC miner - page 2. (Read 33534 times)