@Doktor:
Stellite will Hardfork next Week. Can u please implement th new Code so that it is also Mine able?
THX
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 249. (Read 237247 times)
May 30, 2018, 03:55:46 PM
May 30, 2018, 03:50:03 PM
Electronero mining :
Example :
start.bat :
SRBMiner-CN.exe --config config-electronero.txt --pools pools-electronero.txt
config-electronero.txt
{
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 60,
"shutdown_temperature" : 90,
"api_enabled" : true
}
pools-electronero.txt
{
"pools" :
[
{"pool" : "etnx.ingest.cryptoknight.cc:5102", "wallet" : "YOUR-WALLET", "password" : "x"}
]
}
Example :
start.bat :
SRBMiner-CN.exe --config config-electronero.txt --pools pools-electronero.txt
config-electronero.txt
{
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 60,
"shutdown_temperature" : 90,
"api_enabled" : true
}
pools-electronero.txt
{
"pools" :
[
{"pool" : "etnx.ingest.cryptoknight.cc:5102", "wallet" : "YOUR-WALLET", "password" : "x"}
]
}
May 30, 2018, 01:44:14 PM
DOC. See this.
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
this is not the latest version. Please report bugs only for the latest version.
Ovo sto prijavljujes za los prikaz BUS id jer reseno u novijoj verziji, pise na prvoj strani.
Takodje smanjite ljudi intenzitet na kartama koje vam blokiraju, pa nece ni doci do pucanja drajvera / pada hasha na 0.
Ili ste jako nabrijali tj overklokovali karte, ili vozite na previsokom intenzitetu. Da iste su sve karte, ali ne moze cak ni svaka ista karta isti intenzitet.
Ok za intenzititet- ok za verziju ui krivi reoorder. Problem je sto miner prepozna 0 hash ode u restart al onda zbloka i nista se ne desava. Bolje mi je da zbloka cijeli komp i ode u restart i pokrene se ispocetka nego ovako. ovako ne radi nista. i to je tako i u 15.5.1 verziji. Znaci komp se nije zabloko nego je jednostavno miner ostao na toj akrtici i nije radio nista a morao je radit bar nesto- otic u restart svega ili nesto. Bolje mi je da je ostala ugasena kartica nego ovo sto radi . starije verzije su uredno radile restart cijelog stroja kad je nesto zblokalo a evo sad sve staeni to je koma.
I za ovo pravim resenje bice u sledecoj verziji, bez brige
May 30, 2018, 01:10:06 PM
hello @
what intensity do u use with vega 56 stock bios for etn mining ?
what intensity do u use with vega 56 stock bios for etn mining ?
intensity for vega 56 with 64 bios
v7 = intensyiti 120
heavy = 56
lite = 235
lite v7 = 235
ipbc = 234/239
aeon = 235
arto = 120
b2n = 120
aloy = 120
May 30, 2018, 12:43:52 PM
hello @
what intensity do u use with vega 56 stock bios for etn mining ?
what intensity do u use with vega 56 stock bios for etn mining ?
May 30, 2018, 12:28:45 PM
DOC. See this.
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
this is not the latest version. Please report bugs only for the latest version.
Ovo sto prijavljujes za los prikaz BUS id jer reseno u novijoj verziji, pise na prvoj strani.
Takodje smanjite ljudi intenzitet na kartama koje vam blokiraju, pa nece ni doci do pucanja drajvera / pada hasha na 0.
Ili ste jako nabrijali tj overklokovali karte, ili vozite na previsokom intenzitetu. Da iste su sve karte, ali ne moze cak ni svaka ista karta isti intenzitet.
Ok za intenzititet- ok za verziju ui krivi reoorder. Problem je sto miner prepozna 0 hash ode u restart al onda zbloka i nista se ne desava. Bolje mi je da zbloka cijeli komp i ode u restart i pokrene se ispocetka nego ovako. ovako ne radi nista. i to je tako i u 15.5.1 verziji. Znaci komp se nije zabloko nego je jednostavno miner ostao na toj akrtici i nije radio nista a morao je radit bar nesto- otic u restart svega ili nesto. Bolje mi je da je ostala ugasena kartica nego ovo sto radi . starije verzije su uredno radile restart cijelog stroja kad je nesto zblokalo a evo sad sve staeni to je koma.
May 30, 2018, 12:20:16 PM
Will SRB Miner work for ETN after the fork? They have switched to CryptonightV7 apparently 
sure, use normalv7
May 30, 2018, 11:56:44 AM
Will SRB Miner work for ETN after the fork? They have switched to CryptonightV7 apparently
sure, use normalv7
May 30, 2018, 11:49:35 AM
Will SRB Miner work for ETN after the fork? They have switched to CryptonightV7 apparently
May 30, 2018, 11:08:06 AM
The same thing is happening to me. Very unstable miner. Shows me the same error about hashing speed and blocks the pc.
you can use xmr stak or cast if this one is very unstable for you.
May 30, 2018, 10:40:21 AM
DOC. See this.
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
this is not the latest version. Please report bugs only for the latest version.
Ovo sto prijavljujes za los prikaz BUS id jer reseno u novijoj verziji, pise na prvoj strani.
Takodje smanjite ljudi intenzitet na kartama koje vam blokiraju, pa nece ni doci do pucanja drajvera / pada hasha na 0.
Ili ste jako nabrijali tj overklokovali karte, ili vozite na previsokom intenzitetu. Da iste su sve karte, ali ne moze cak ni svaka ista karta isti intenzitet.
May 30, 2018, 10:30:51 AM
The same thing is happening to me. Very unstable miner. Shows me the same error about hashing speed and blocks the pc.
May 30, 2018, 10:19:10 AM
DOC. See this.
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
https://image.prntscr.com/image/_hi-Xy9HTimx_vPSpHkK2w.jpg
https://image.prntscr.com/image/ijcX3aSuTOG0uvT47TKV9w.jpg
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
First. Block GPU BUS 7 but srb say gpu3=0
Second restart miner BLOCK and stay.
Stay 2 hour - Computer work fine. but miner stop and block.
After this i close miner and komp STUTH DOWN and reset.
This is not first time.
https://image.prntscr.com/image/_hi-Xy9HTimx_vPSpHkK2w.jpg
https://image.prntscr.com/image/ijcX3aSuTOG0uvT47TKV9w.jpg
this is it. Tu je zbloko i stoji tako dok ja ne skuzim da je zbloko i ne ugasim. Ktome kad to napravi nema nikakve log doatoteke - ne zapise prakticki nista. ostane zapis neki star par sati i nema nikakvog erora.. Ovo sam se vratio na stariju verziju al i u 1.5.5.1 je sve isto bilo
May 30, 2018, 08:56:37 AM
Then intensity to 59 on your RX 580
On the Cryptonight-heavy algorithm everything is all OK 980H-RX580 IN 51 , 560H-RX460 IN26 May 30, 2018, 08:41:39 AM
Then intensity to 59 on your RX 580
May 30, 2018, 08:11:05 AM
Hi I have problems with intensity, it is much heavily, should be 51 for RX580 and 26-29 for RX460 how to fix it thank you !!! Micron memory. there is no difference 1.4.9 or 1.5.6
https://imgur.com/KDdtAwo
https://imgur.com/KDdtAwo
add this in your config.txt :
"gpu_conf" :
[
{ "id" : 0, "intensity" : 51, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 29, "worksize" : 8, "threads" : 2}
]
Thanks, it worked, but now the problem with the drag is the speed of the RX580 decreased twice
https://imgur.com/QfrW6Vh
HELP!!)
"gpu_conf" :
[
{ "id" : 0, "intensity" : 29, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 51, "worksize" : 8, "threads" : 2}
]
No id:0 is RX580
id:1 is RX460
May 30, 2018, 07:50:33 AM
Hi I have problems with intensity, it is much heavily, should be 51 for RX580 and 26-29 for RX460 how to fix it thank you !!! Micron memory. there is no difference 1.4.9 or 1.5.6
add this in your config.txt :
"gpu_conf" :
[
{ "id" : 0, "intensity" : 51, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 29, "worksize" : 8, "threads" : 2}
]
Thanks, it worked, but now the problem with the drag is the speed of the RX580 decreased twice
HELP!!)
"gpu_conf" :
[
{ "id" : 0, "intensity" : 29, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 51, "worksize" : 8, "threads" : 2}
]
May 30, 2018, 06:49:41 AM
Hi I have problems with intensity, it is much heavily, should be 51 for RX580 and 26-29 for RX460 how to fix it thank you !!! Micron memory. there is no difference 1.4.9 or 1.5.6
https://imgur.com/KDdtAwo
https://imgur.com/KDdtAwo
add this in your config.txt :
"gpu_conf" :
[
{ "id" : 0, "intensity" : 51, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 29, "worksize" : 8, "threads" : 2}
]
Thanks, it worked, but now the problem with the drag is the speed of the RX580 decreased twice
https://imgur.com/QfrW6Vh
HELP!!)
May 30, 2018, 06:24:10 AM
Hi I have problems with intensity, it is much heavily, should be 51 for RX580 and 26-29 for RX460 how to fix it thank you !!! Micron memory. there is no difference 1.4.9 or 1.5.6
https://imgur.com/KDdtAwo
https://imgur.com/KDdtAwo
add this in your config.txt :
"gpu_conf" :
[
{ "id" : 0, "intensity" : 51, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 29, "worksize" : 8, "threads" : 2}
]
Thanks, it worked, but now the problem with the drag is the speed of the RX580 decreased twice
https://imgur.com/QfrW6Vh
HELP!!)
May 30, 2018, 05:48:01 AM
Hi I have problems with intensity, it is much heavily, should be 51 for RX580 and 26-29 for RX460 how to fix it thank you !!! Micron memory. there is no difference 1.4.9 or 1.5.6
add this in your config.txt :
"gpu_conf" :
[
{ "id" : 0, "intensity" : 51, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 29, "worksize" : 8, "threads" : 2}
]
Jump to: