SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 291.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: psychocrypt on April 30, 2018, 07:02:46 AM

This miner is a fork of xmr-stak which is GPL. As long as the author is not providing the source code it is a GPL license violation.

PLEASE do not use this miner until doktor83 is providing the source code

Its not a fork of xmr-stak.

I don't say i did not use some of the ideas from other open source projects. I would lie if i said that.
So sorry, no source code for you.

RaidoP2

newbie

Activity: 61

Merit: 0

Quote from: psychocrypt on April 30, 2018, 07:02:46 AM

This miner is a fork of xmr-stak which is GPL. As long as the author is not providing the source code it is a GPL license violation.

PLEASE do not use this miner until doktor83 is providing the source code

Proof?

Lunga Chung

member

Activity: 277

Merit: 23

Quote from: psychocrypt on April 30, 2018, 07:02:46 AM

This miner is a fork of xmr-stak which is GPL. As long as the author is not providing the source code it is a GPL license violation.

PLEASE do not use this miner until doktor83 is providing the source code

funny...

optii

newbie

Activity: 23

Merit: 3

can someone explain to me what im doing wrong? ver 149

xmr-cast to same CCv7 coin and pool , vega 56 ref card, samsung memory, get 1960 HS,

with srb miner,
intensity 0 - 1300Hs
Intensity 56 - 1440hs
intensity 58 - 1440hs
intensity 60 - 1440hs

target temp is set to 56 C. 2 threads is TRUE

and im using powerplay tables GPU 1450 mhz and mem 950 mhz

GPU0: Radeon RX Vega [gfx900] [8094 MB][Intensity 58.0][W: 8][T: 2][K: 1][BUS: 3]

which intensity should i try?

psychocrypt

newbie

Activity: 1

Merit: 0

This miner is a fork of xmr-stak which is GPL. As long as the author is not providing the source code it is a GPL license violation.

PLEASE do not use this miner until doktor83 is providing the source code

livada

newbie

Activity: 417

Merit: 0

Quote from: locbet on April 30, 2018, 12:28:00 AM

Quote from: livada on April 28, 2018, 11:05:21 AM

Quote from: rednoW on April 28, 2018, 06:09:08 AM

Cast xmr works better for vega and heavy. Srbminer is best for v7

not true
i have 3*vega 56 -
heavy and cast = 4400HR
heavy and SRB = 4500HR
SS heavy - 530W
https://image.prntscr.com/image/GNijU9AvQgaWTSSxzJo1Ig.jpg

v7 and cast = 5550HR
v7 and SRB = 5850HR
SS v7 - 565W
https://image.prntscr.com/image/IL1ZCdsdT4iEbgA8gfgmAQ.jpg

lite and cast = 11000HR
lite and SRB = 12000HR

My Rig 6 Vega 64. Sumokoin

Cast XMR
https://image.prntscr.com/image/8p3vYVJYRdiQR7IZCIQmFA.png

SRMiner
https://image.prntscr.com/image/VD4moOI7QAycmXZfM4o0fQ.png

OverDriveNTool

https://image.prntscr.com/image/jsfTjzXVTz6lZTx1pgJZBA.png

Your can share your config. I'm try SRBMiner but not good hashrate

@Docktor83: Please support Json API

Using Driver 18.3.4
Thanks

read last 5-6 page. i send my confing couple of times. i not use overdrive .

"gpu_conf" :
[
{ "id" : 0, "intensity" :56, "worksize" : 8, "threads" : 2, "target_temperature" : 59},
{ "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 58},
{ "id" : 2, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 56},

gpu 900-910mv
mem 900-905mv

your gpu is too low. i have vega56 with 64 biso and my gpu go on 1450mhz.

intesity for vega 64 : try 56-58-60

micax1

hero member

Activity: 708

Merit: 502

Quote from: doktor83 on April 30, 2018, 01:46:45 AM

You can always set fan speed, if temperature_target isn't working for you.
For ex you know the RPM you need, you can set it in gpu_conf.

here are logs and output for the above config:

Code:

[2018-04-30 10:33:41] AMD Platform ID: 0
[2018-04-30 10:33:41] AMD platform FOUND
[2018-04-30 10:33:41] Found 12 AMD devices
[2018-04-30 10:33:41] gpu_conf: GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 13]
[2018-04-30 10:33:41] gpu_conf: GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-04-30 10:33:41] gpu_conf: GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 15]
[2018-04-30 10:33:41] gpu_conf: GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 6]
[2018-04-30 10:33:41] gpu_conf: GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-04-30 10:33:41] gpu_conf: GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 14]
[2018-04-30 10:33:41] gpu_conf: GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 12]
[2018-04-30 10:33:41] gpu_conf: GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-04-30 10:33:41] gpu_conf: GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 2]
[2018-04-30 10:33:41] gpu_conf: GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-04-30 10:33:41] gpu_conf: GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 11]
[2018-04-30 10:33:41] gpu_conf: GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 8]
[2018-04-30 10:33:41] ADL is enabled
[2018-04-30 10:33:41] CryptonightV7 mode enabled
[2018-04-30 10:33:41] PcieBusId[13] thread 0 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[13] thread 1 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[3] thread 2 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[3] thread 3 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[15] thread 4 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[15] thread 5 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[6] thread 6 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[6] thread 7 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[1] thread 8 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[1] thread 9 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[14] thread 10 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[14] thread 11 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[12] thread 12 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[12] thread 13 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[4] thread 14 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[4] thread 15 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[2] thread 16 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[2] thread 17 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[5] thread 18 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[5] thread 19 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[11] thread 20 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[11] thread 21 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[8] thread 22 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[8] thread 23 using OCLKernelID 1
[2018-04-30 10:33:41] Compiling kernel for GPU0 ...
[2018-04-30 10:33:42] Compiling kernel for GPU0 ...
[2018-04-30 10:33:43] Compiling kernel for GPU1 ...
[2018-04-30 10:33:45] Compiling kernel for GPU1 ...
[2018-04-30 10:33:46] Compiling kernel for GPU2 ...
[2018-04-30 10:33:47] Compiling kernel for GPU2 ...
[2018-04-30 10:33:48] Compiling kernel for GPU3 ...
[2018-04-30 10:33:49] Compiling kernel for GPU3 ...
[2018-04-30 10:33:50] Compiling kernel for GPU4 ...
[2018-04-30 10:33:52] Compiling kernel for GPU4 ...
[2018-04-30 10:33:53] Compiling kernel for GPU5 ...
[2018-04-30 10:33:54] Compiling kernel for GPU5 ...
[2018-04-30 10:33:55] Compiling kernel for GPU6 ...
[2018-04-30 10:33:56] Compiling kernel for GPU6 ...
[2018-04-30 10:33:58] Compiling kernel for GPU7 ...
[2018-04-30 10:33:59] Compiling kernel for GPU7 ...
[2018-04-30 10:34:00] Compiling kernel for GPU8 ...
[2018-04-30 10:34:01] Compiling kernel for GPU8 ...
[2018-04-30 10:34:02] Compiling kernel for GPU9 ...
[2018-04-30 10:34:04] Compiling kernel for GPU9 ...
[2018-04-30 10:34:05] Compiling kernel for GPU10 ...
[2018-04-30 10:34:06] Compiling kernel for GPU10 ...
[2018-04-30 10:34:07] Compiling kernel for GPU11 ...
[2018-04-30 10:34:08] Compiling kernel for GPU11 ...
[2018-04-30 10:34:10] ADL init successful
[2018-04-30 10:34:10] Gpu watchdog started
[2018-04-30 10:34:10] watchdog: Setting watchdog array to 0
[2018-04-30 10:34:10] on_reconnect: Connecting to cryptonightv7.eu.nicehash.com:3363
[2018-04-30 10:34:10] json_send: {"method":"login","params":{"login":"xxx.worker5","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.4.9"},"id":1}
[2018-04-30 10:34:11] json_receive: {"jsonrpc":"2.0","id":1,"error":null,"result":{"id":"152761423221685","status":"OK","job":{"job_id":"00000062b7b8af17","blob":"0909d48d9bd705a7ec0e1d898c77fbd3d4fc9b2e1545def6f0f47fba0758d1420b8183b1ce6a940000007193858bd8e0673135862e8a11dceea1991c0fad5edc5852c99cf4e7fdbbb6df0801","target":"c5a70000"}}}
[2018-04-30 10:34:11] sock_ready: User logged in
[2018-04-30 10:34:11] pool_have_job: Pool difficulty: 100001
[2018-04-30 10:34:11] pool_have_job: Pool sent a new job (ID: 00000062b7b8af17)
[2018-04-30 10:34:29] json_receive: {"params":{"job_id":"00000062b7b8d344","blob":"0909878e9bd705879eb03f0e8e55d2b4c51d8095f43be8e81b19732de565a37df16881ede575bc00000071a1765d17d3da8f011592090f45d19930751ba73880a24d4f390589ad795a9c5d01","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:34:29] pool_have_job: Pool sent a new job (ID: 00000062b7b8d344)
[2018-04-30 10:34:34] miner_result: Sending user result to pool
[2018-04-30 10:34:34] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b8d344","nonce":"a7aeca71","result":"131c6f142def47d5ca66ec1c35657faef8cb424af639d8d2a1168f525da60000"},"id":1}
[2018-04-30 10:34:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:34:35] miner_result: Pool accepted result 0x0000A65D
[2018-04-30 10:34:40] miner_result: Sending user result to pool
[2018-04-30 10:34:40] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b8d344","nonce":"c4b2ea71","result":"b55c57d33d422f03e8880f1f3aa068532ccd57f9541f843fdb5245a6da880000"},"id":1}
[2018-04-30 10:34:40] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:34:40] miner_result: Pool accepted result 0x000088DA
[2018-04-30 10:34:54] json_receive: {"params":{"job_id":"00000062b7b95e4b","blob":"0909f0939bd7052f7a78ac55e6ffc6fca9201ffdce7cadc2f26f4097aee4b55196b727c92a2da90000007127c4b4ffcb412ef95be0d1b9e6d886146cf7c9687aa388c237552d824674cbf801","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:34:54] pool_have_job: Pool sent a new job (ID: 00000062b7b95e4b)
[2018-04-30 10:35:08] miner_result: Sending user result to pool
[2018-04-30 10:35:08] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b95e4b","nonce":"e50c6071","result":"afac917811fcd4a0f346b013b9245497be54afc907784ef4e4a7fa57eea40000"},"id":1}
[2018-04-30 10:35:08] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:35:10] miner_result: Pool accepted result 0x0000A4EE
[2018-04-30 10:35:30] miner_result: Sending user result to pool
[2018-04-30 10:35:30] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b95e4b","nonce":"4a1e8071","result":"b611827cfbaa64ce62953387c2e8f2c2d94ae9114fbd74750402780a950a0000"},"id":1}
[2018-04-30 10:35:30] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:35:30] miner_result: Pool accepted result 0x00000A95
[2018-04-30 10:35:34] json_receive: {"params":{"job_id":"00000062b7ba12a4","blob":"0909c88e9bd7051071c57c2803d3fc792760debba8c0af050a45977290ebe6df0c1e13b6fa2e4800000071e3bc0be1a8908cfc53759526f8c488e3f67d08ce5e7a9ae422109ad06a04cf7a01","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:35:34] pool_have_job: Pool sent a new job (ID: 00000062b7ba12a4)
[2018-04-30 10:35:36] json_receive: {"params":{"job_id":"00000062b7ba1df0","blob":"0909c88e9bd7051071c57c2803d3fc792760debba8c0af050a45977290ebe6df0c1e13b6fa2e48000000d804aae8b7b24d9748cfcfaadc14a1aa2a7118602ba44a87fa25c2556ddc831a2901","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:35:36] pool_have_job: Pool sent a new job (ID: 00000062b7ba1df0)
[2018-04-30 10:35:52] Stopping miner process

Code:

GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 13]
GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 3]
GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 15]
GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 6]
GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 1]
GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 14]
GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 12]
GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 4]
GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 2]
GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 5]
GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 11]
GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 8]

---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.4.9
DevFee 1 minute every 2 hours (~ 0.85%)
Press 's' to get some stats
Press 'h' to get some hashrate
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------
Total pools: 2

Please wait...

CryptonightV7 mode enabled

[2018-04-30 10:33:41] Heating up system, please wait...
[2018-04-30 10:33:41] Compiling kernel for GPU0 ...
[2018-04-30 10:33:42] Compiling kernel for GPU0 ...
[2018-04-30 10:33:43] Compiling kernel for GPU1 ...
[2018-04-30 10:33:45] Compiling kernel for GPU1 ...
[2018-04-30 10:33:46] Compiling kernel for GPU2 ...
[2018-04-30 10:33:47] Compiling kernel for GPU2 ...
[2018-04-30 10:33:48] Compiling kernel for GPU3 ...
[2018-04-30 10:33:49] Compiling kernel for GPU3 ...
[2018-04-30 10:33:50] Compiling kernel for GPU4 ...
[2018-04-30 10:33:52] Compiling kernel for GPU4 ...
[2018-04-30 10:33:53] Compiling kernel for GPU5 ...
[2018-04-30 10:33:54] Compiling kernel for GPU5 ...
[2018-04-30 10:33:55] Compiling kernel for GPU6 ...
[2018-04-30 10:33:56] Compiling kernel for GPU6 ...
[2018-04-30 10:33:58] Compiling kernel for GPU7 ...
[2018-04-30 10:33:59] Compiling kernel for GPU7 ...
[2018-04-30 10:34:00] Compiling kernel for GPU8 ...
[2018-04-30 10:34:01] Compiling kernel for GPU8 ...
[2018-04-30 10:34:02] Compiling kernel for GPU9 ...
[2018-04-30 10:34:04] Compiling kernel for GPU9 ...
[2018-04-30 10:34:05] Compiling kernel for GPU10 ...
[2018-04-30 10:34:06] Compiling kernel for GPU10 ...
[2018-04-30 10:34:07] Compiling kernel for GPU11 ...
[2018-04-30 10:34:08] Compiling kernel for GPU11 ...
[2018-04-30 10:34:10] ADL initialised successfully!
[2018-04-30 10:34:10] GPU0: nan H/S [T: 32c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU1: nan H/S [T: 48c, RPM: 0, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:10] GPU2: nan H/S [T: 49c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU3: nan H/S [T: 43c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU4: nan H/S [T: 43c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU5: nan H/S [T: 40c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU6: nan H/S [T: 46c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU7: nan H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU8: nan H/S [T: 44c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU9: nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU10: nan H/S [T: 42c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU11: nan H/S [T: 51c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] Connecting to cryptonightv7.eu.nicehash.com:3363
[2018-04-30 10:34:10] Connected!
[2018-04-30 10:34:11] User logged in
[2018-04-30 10:34:11] Pool difficulty: 100001
[2018-04-30 10:34:11] Pool sent a new job (ID: 00000062b7b8af17)
[2018-04-30 10:34:20] GPU0: nan H/S [T: 41c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU1: nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:20] GPU2: nan H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU3: nan H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU4: nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU5: nan H/S [T: 48c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU6: nan H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU7: nan H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU8: nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU9: nan H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU10: nan H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU11: nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU0: 479.0 H/S [T: 43c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU1: 419.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:26] GPU2: 494.0 H/S [T: 59c, RPM: 671, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU3: 445.0 H/S [T: 54c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU4: 453.0 H/S [T: 54c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU5: 455.0 H/S [T: 50c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU6: 451.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU7: 449.0 H/S [T: 57c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU8: 448.0 H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU9: 233.0 H/S [T: 60c, RPM: 3168, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU10: 483.0 H/S [T: 49c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU11: 224.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] Total: 5033.0 H/S
[2018-04-30 10:34:29] Pool sent a new job (ID: 00000062b7b8d344)
[2018-04-30 10:34:30] GPU0: 486.0 H/S [T: 45c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU1: 444.0 H/S [T: 60c, RPM: 2618, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:30] GPU2: 499.0 H/S [T: 60c, RPM: 3189, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU3: 456.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU4: 457.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU5: 459.0 H/S [T: 51c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU6: 455.0 H/S [T: 60c, RPM: 2626, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU7: 451.0 H/S [T: 59c, RPM: 1463, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU8: 448.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU9: 476.0 H/S [T: 60c, RPM: 3241, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU10: 488.0 H/S [T: 50c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU11: 447.0 H/S [T: 60c, RPM: 3057, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] Total: 5566.0 H/S
[2018-04-30 10:34:35] Pool accepted result 0x0000A65D
[2018-04-30 10:34:35] GPU0: 490.0 H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU1: 453.0 H/S [T: 60c, RPM: 3143, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:35] GPU2: 499.0 H/S [T: 59c, RPM: 3190, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU3: 493.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU4: 459.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU5: 461.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU6: 459.0 H/S [T: 60c, RPM: 3251, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU7: 455.0 H/S [T: 61c, RPM: 3143, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU8: 450.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU9: 498.0 H/S [T: 60c, RPM: 3223, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU10: 492.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU11: 449.0 H/S [T: 60c, RPM: 3236, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] Total: 5658.0 H/S
[2018-04-30 10:34:40] Pool accepted result 0x000088DA
[2018-04-30 10:34:41] GPU0: 492.0 H/S [T: 48c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU1: 457.0 H/S [T: 60c, RPM: 3115, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:41] GPU2: 499.0 H/S [T: 59c, RPM: 3242, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU3: 492.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU4: 461.0 H/S [T: 60c, RPM: 2966, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU5: 463.0 H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU6: 461.0 H/S [T: 60c, RPM: 3242, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU7: 459.0 H/S [T: 60c, RPM: 3155, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU8: 455.0 H/S [T: 60c, RPM: 3089, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU9: 498.0 H/S [T: 59c, RPM: 3214, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU10: 494.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU11: 448.0 H/S [T: 60c, RPM: 3248, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] Total: 5679.0 H/S
[2018-04-30 10:34:50] GPU0: 494.0 H/S [T: 51c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU1: 455.0 H/S [T: 60c, RPM: 3135, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:50] GPU2: 499.0 H/S [T: 58c, RPM: 3274, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU3: 493.0 H/S [T: 59c, RPM: 3185, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU4: 482.0 H/S [T: 59c, RPM: 3236, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU5: 466.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU6: 465.0 H/S [T: 60c, RPM: 3232, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU7: 464.0 H/S [T: 60c, RPM: 3108, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU8: 460.0 H/S [T: 58c, RPM: 3203, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU9: 499.0 H/S [T: 59c, RPM: 3215, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU10: 494.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU11: 479.0 H/S [T: 59c, RPM: 3239, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] Total: 5750.0 H/S
[2018-04-30 10:34:54] Pool sent a new job (ID: 00000062b7b95e4b)

ninjam

newbie

Activity: 84

Merit: 0

which parameters to use for vega cards?

RaidoP2

newbie

Activity: 61

Merit: 0

Quote from: doktor83 on April 30, 2018, 02:04:06 AM

Quote from: RaidoP2 on April 30, 2018, 01:53:46 AM

Could anyone share their config settings for R9 290 and 290x cards? and also clocks and volts?

I am getting HW errors in miner with 290x with almost stock memory clocks. HWInfo doesn't show any memory errors for the card. When I lower the intensity they seem to go away but the hashrate also suffers greatly. At the moment it is running at 47 intensity with 2 threads.

Are these memory errors bad in any way? The shares seem to be accepted but the pool shows much lower hashrate than miner.

did you try kernel 2,3 or 4 ?
you put "kernel" : number in gpu_conf

and yes, hw errors are bad if you have a lot. It means your gpu computed wrong result.

No I haven't tried with different kernels, although they are GCN cards, but will try it out, thanks!

How much is a lot? I get about 17 errors per hour.

micax1

hero member

Activity: 708

Merit: 502

Quote from: doktor83 on April 30, 2018, 01:46:45 AM

You can always set fan speed, if temperature_target isn't working for you.
For ex you know the RPM you need, you can set it in gpu_conf.

Code:

{
"cryptonight_type" : "normalv7",
"log_file" : "log.log",
"intensity" : 23,
"double_threads" : true,
/*"target_temperature" : 55,*/
"shutdown_temperature" : 80,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 1, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 2, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 3, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 4, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 5, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 6, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 7, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 8, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 9, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 10, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 11, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
]
}

Code:

C:\SRBMiner>SRBMiner-CN.exe --listdevices
[2018-04-30 10:10:22] Platform #0
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] AMD Accelerated Parallel Processing
[2018-04-30 10:10:22] Advanced Micro Devices, Inc.
[2018-04-30 10:10:22] OpenCL 2.1 AMD-APP (2527.10)
[2018-04-30 10:10:22] DEVICES: 13
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [0]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 13
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [1]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 10
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 3
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [2]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 15
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [3]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 6
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [4]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 1
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [5]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 14
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [6]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 12
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [7]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 4
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [8]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 2
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [9]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 5
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [10]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 11
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [11]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 8
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [12]
[2018-04-30 10:10:22] Type: CPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 2
[2018-04-30 10:10:22] RAM: 4034 MB
[2018-04-30 10:10:22] BUSID: -1
[2018-04-30 10:10:22]
[2018-04-30 10:10:22]

can you please confirm that this config is correct?
because it`s not setting fan speeds to 3000

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: RaidoP2 on April 30, 2018, 01:53:46 AM

Could anyone share their config settings for R9 290 and 290x cards? and also clocks and volts?

I am getting HW errors in miner with 290x with almost stock memory clocks. HWInfo doesn't show any memory errors for the card. When I lower the intensity they seem to go away but the hashrate also suffers greatly. At the moment it is running at 47 intensity with 2 threads.

Are these memory errors bad in any way? The shares seem to be accepted but the pool shows much lower hashrate than miner.

did you try kernel 2,3 or 4 ?
you put "kernel" : number in gpu_conf

and yes, hw errors are bad if you have a lot. It means your gpu computed wrong result.

RaidoP2

newbie

Activity: 61

Merit: 0

Could anyone share their config settings for R9 290 and 290x cards? and also clocks and volts?

I am getting HW errors in miner with 290x with almost stock memory clocks. HWInfo doesn't show any memory errors for the card. When I lower the intensity they seem to go away but the hashrate also suffers greatly. At the moment it is running at 47 intensity with 2 threads.

Are these memory errors bad in any way? The shares seem to be accepted but the pool shows much lower hashrate than miner.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: micax1 on April 30, 2018, 01:40:58 AM

Quote from: doktor83 on April 30, 2018, 01:31:46 AM

target_fan_speed in RPM should be only added to gpu_config section only, per card basis?
Yes

target_temperature should work in general section by design?
If you omit the setting on top of config, it assumes it's not set.
If you set it > 0 , it will use it for every card available.
If you set it to 0, or omit it completely, and put it in gpu_conf section for each card, then it will use those settings.

Why i made it like this ?
By setting target temp on top, every card will adjust it's fanspeed to maintain this temperature.
Target fan speed isn't supported in general section cause it's something that is let's say unique for every card.
Fan speed 3000 may hold one card on 45c , other on 60.

well not in case you have rx 550 rigs.. that have 12 cards each. but that`s ok, % is more reliable for general case, i can agree.

Quote from: doktor83 on April 30, 2018, 01:31:46 AM

It does, but i don't know how it should work if you set one thing with 3rd party tool, one in miner. You set fans on 75%, but want temperature 55c.
So do you want 55c or 75% fan speed ?

if only miner can control fans out-of the-box with target temperature, I turn off all third party tools, and enjoy easy deploy and config.
however its not the case (

Thats waht i get with only miner control of fans:
(temps above 70 are devastating for these cards - and they hit it pretty quick)

Quote from: micax1 on April 29, 2018, 09:50:30 AM

Code:

[2018-04-29 17:41:59] GPU0:    465.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU1:    435.0 H/S [T: 62c, RPM: 904, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:41:59] GPU2:    499.0 H/S [T: 60c, RPM: 860, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU3:    499.0 H/S [T: 59c, RPM: 813, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU4:    460.0 H/S [T: 60c, RPM: 870, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU5:    449.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU6:    397.0 H/S [T: 61c, RPM: 863, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU7:    437.0 H/S [T: 62c, RPM: 815, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU8:    496.0 H/S [T: 59c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU9:    492.0 H/S [T: 61c, RPM: 1061, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU10:    452.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU11:    499.0 H/S [T: 62c, RPM: 924, CC: 1150 MHz, MC: 1900 MHz]

You can always set fan speed, if temperature_target isn't working for you.
For ex you know the RPM you need, you can set it in gpu_conf.

micax1

hero member

Activity: 708

Merit: 502

Quote from: doktor83 on April 30, 2018, 01:31:46 AM

target_fan_speed in RPM should be only added to gpu_config section only, per card basis?
Yes

target_temperature should work in general section by design?
If you omit the setting on top of config, it assumes it's not set.
If you set it > 0 , it will use it for every card available.
If you set it to 0, or omit it completely, and put it in gpu_conf section for each card, then it will use those settings.

Why i made it like this ?
By setting target temp on top, every card will adjust it's fanspeed to maintain this temperature.
Target fan speed isn't supported in general section cause it's something that is let's say unique for every card.
Fan speed 3000 may hold one card on 45c , other on 60.

well not in case you have rx 550 rigs.. that have 12 cards each. but that`s ok, % is more reliable for general case, i can agree.

Quote from: doktor83 on April 30, 2018, 01:31:46 AM

It does, but i don't know how it should work if you set one thing with 3rd party tool, one in miner. You set fans on 75%, but want temperature 55c.
So do you want 55c or 75% fan speed ?

if only miner can control fans out-of the-box with target temperature, I turn off all third party tools, and enjoy easy deploy and config.
however its not the case (

Thats waht i get with only miner control of fans:
(temps above 70 are devastating for these cards - and they hit it pretty quick)

Quote from: micax1 on April 29, 2018, 09:50:30 AM

Code:

[2018-04-29 17:41:59] GPU0:    465.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU1:    435.0 H/S [T: 62c, RPM: 904, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:41:59] GPU2:    499.0 H/S [T: 60c, RPM: 860, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU3:    499.0 H/S [T: 59c, RPM: 813, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU4:    460.0 H/S [T: 60c, RPM: 870, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU5:    449.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU6:    397.0 H/S [T: 61c, RPM: 863, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU7:    437.0 H/S [T: 62c, RPM: 815, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU8:    496.0 H/S [T: 59c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU9:    492.0 H/S [T: 61c, RPM: 1061, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU10:    452.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU11:    499.0 H/S [T: 62c, RPM: 924, CC: 1150 MHz, MC: 1900 MHz]

edit:
(target temperature was set in that case above) w no third party utils setting fans.

doktor83

hero member

Activity: 2548

Merit: 626

target_fan_speed in RPM should be only added to gpu_config section only, per card basis?
Yes

target_temperature should work in general section by design?
If you omit the setting on top of config, it assumes it's not set.
If you set it > 0 , it will use it for every card available.
If you set it to 0, or omit it completely, and put it in gpu_conf section for each card, then it will use those settings.

Why i made it like this ?
By setting target temp on top, every card will adjust it's fanspeed to maintain this temperature.
Target fan speed isn't supported in general section cause it's something that is let's say unique for every card.
Fan speed 3000 may hold one card on 45c , other on 60.

here is config I tried today w 1.4.9, win10ltsb, 18.3.4 drivers:

Code:

{
"cryptonight_type" : "normalv7",
"log_file" : "log.log", -> this isn't used anymore
"intensity" : 23,
"double_threads" : true,
"target_temperature" : 55,
"shutdown_temperature" : 90,
}

and here are the temps without adldisable and with fan control from third party util set to 75% of RPM

Code:

[2018-04-30 09:05:02] GPU0:    466.0 H/S [T: 59c, RPM: 2782, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU1:    456.0 H/S [T: 60c, RPM: 2854, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 09:05:02] GPU2:    499.0 H/S [T: 56c, RPM: 2974, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU3:    497.0 H/S [T: 59c, RPM: 3041, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU4:    499.0 H/S [T: 57c, RPM: 2988, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU5:    466.0 H/S [T: 61c, RPM: 3038, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU6:    499.0 H/S [T: 63c, RPM: 3036, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU7:    499.0 H/S [T: 62c, RPM: 2904, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU8:    499.0 H/S [T: 57c, RPM: 3044, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU9:    499.0 H/S [T: 57c, RPM: 2937, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU10:    460.0 H/S [T: 54c, RPM: 2798, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU11:    492.0 H/S [T: 60c, RPM: 2998, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] Total:   5831.0 H/S

it`s just after couple minutes - and it will go higher...
so does target_temperature do anything? (in general section)

It does, but i don't know how it should work if you set one thing with 3rd party tool, one in miner. You set fans on 75%, but want temperature 55c.
So do you want 55c or 75% fan speed ?

micax1

hero member

Activity: 708

Merit: 502

Quote from: doktor83 on April 29, 2018, 01:07:28 PM

From the first page :

V1.4.8
- Added support for new ArtoCash algo
- Added fast pool switching when pressing P
- Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED
- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry Smiley
- Minor bug fixes
[/quote]

here is sample config from 1.4.9 that comes with miner:

Code:

{
/* Type can be : normal, normalv7, lite, litev7, heavy, ipbc, artocash  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 0,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : false,

/* Uncomment this if you want to set GPU target temperature  */
/*"target_temperature" : 0,*/

/* Uncomment this if you want to set system shutdown temperature  */
/*"shutdown_temperature" : 90,*/

/* Uncomment this if you don't want to use the built in watchdog, but you want a script to run on GPU fail */
/* If you use the reboot-windows.bat it will restart your computer if a GPU fail occurs */
/*"reboot_script" : "reboot-windows.bat",*/

/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */

/*"gpu_conf" : 
[ 
	{ "id" : 0, "intensity" : 80, "worksize" : 8, "threads" : 1},
	{ "id" : 1, "intensity" : 40, "worksize" : 8, "threads" : 2},
	{ "id" : 3, "intensity" : 30, "worksize" : 8, "threads" : 2},
	{ "id" : 4, "intensity" : 90, "worksize" : 8, "threads" : 1}
]*/
}

Well
So... as it lacks example in config... let me assume:
target_fan_speed in RPM should be only added to gpu_config section only, per card basis?
target_temperature should work in general section by design?

here is config I tried today w 1.4.9, win10ltsb, 18.3.4 drivers:

Code:

{
"cryptonight_type" : "normalv7",
"log_file" : "log.log",
"intensity" : 23,
"double_threads" : true,
"target_temperature" : 55,
"shutdown_temperature" : 90,
}

and here are the temps without adldisable and with fan control from third party util set to 75% of RPM

Code:

[2018-04-30 09:05:02] GPU0:    466.0 H/S [T: 59c, RPM: 2782, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU1:    456.0 H/S [T: 60c, RPM: 2854, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 09:05:02] GPU2:    499.0 H/S [T: 56c, RPM: 2974, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU3:    497.0 H/S [T: 59c, RPM: 3041, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU4:    499.0 H/S [T: 57c, RPM: 2988, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU5:    466.0 H/S [T: 61c, RPM: 3038, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU6:    499.0 H/S [T: 63c, RPM: 3036, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU7:    499.0 H/S [T: 62c, RPM: 2904, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU8:    499.0 H/S [T: 57c, RPM: 3044, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU9:    499.0 H/S [T: 57c, RPM: 2937, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU10:    460.0 H/S [T: 54c, RPM: 2798, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU11:    492.0 H/S [T: 60c, RPM: 2998, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] Total:   5831.0 H/S

it`s just after couple minutes - and it will go higher...
so does target_temperature do anything? (in general section)

Quote from: zeii on April 29, 2018, 09:09:40 PM

what card of this Rig?

12* rx 550 on baffin chip.

locbet

newbie

Activity: 42

Merit: 0

Quote from: livada on April 28, 2018, 11:05:21 AM

Quote from: rednoW on April 28, 2018, 06:09:08 AM

Cast xmr works better for vega and heavy. Srbminer is best for v7

not true
i have 3*vega 56 -
heavy and cast = 4400HR
heavy and SRB = 4500HR
SS heavy - 530W
https://image.prntscr.com/image/GNijU9AvQgaWTSSxzJo1Ig.jpg

v7 and cast = 5550HR
v7 and SRB = 5850HR
SS v7 - 565W
https://image.prntscr.com/image/IL1ZCdsdT4iEbgA8gfgmAQ.jpg

lite and cast = 11000HR
lite and SRB = 12000HR

My Rig 6 Vega 64. Sumokoin

Cast XMR
https://image.prntscr.com/image/8p3vYVJYRdiQR7IZCIQmFA.png

SRMiner
https://image.prntscr.com/image/VD4moOI7QAycmXZfM4o0fQ.png

OverDriveNTool

https://image.prntscr.com/image/jsfTjzXVTz6lZTx1pgJZBA.png

Your can share your config. I'm try SRBMiner but not good hashrate

@Docktor83: Please support Json API

Using Driver 18.3.4
Thanks

zeii

newbie

Activity: 41

Merit: 0

Quote from: micax1 on April 29, 2018, 09:50:30 AM

Quote from: doktor83 on April 28, 2018, 12:24:42 AM

Quote from: micax1 on April 27, 2018, 11:15:04 PM

Quote from: doktor83 on April 27, 2018, 04:05:45 PM

old bug on old drivers. On blockchain and newer (18.3.4) its working as its supposed to.
The easiest fix is to update your drivers

will try today )

i hope it helps, if not i will look into it.

checked 18.3.4 today.

Code:

[2018-04-29 17:41:59] GPU0:    465.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU1:    435.0 H/S [T: 62c, RPM: 904, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:41:59] GPU2:    499.0 H/S [T: 60c, RPM: 860, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU3:    499.0 H/S [T: 59c, RPM: 813, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU4:    460.0 H/S [T: 60c, RPM: 870, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU5:    449.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU6:    397.0 H/S [T: 61c, RPM: 863, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU7:    437.0 H/S [T: 62c, RPM: 815, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU8:    496.0 H/S [T: 59c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU9:    492.0 H/S [T: 61c, RPM: 1061, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU10:    452.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU11:    499.0 H/S [T: 62c, RPM: 924, CC: 1150 MHz, MC: 1900 MHz]

however config includes following:

"target_temperature" : 55,
"target_fan_speed" : 3300,

in general section

target fan speed basically not set?

here is the same drivers w your miner, but with 3-rd party overdrive util:

Code:

[2018-04-29 17:49:59] GPU0:    495.0 H/S [T: 49c, RPM: 3083, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU1:    457.0 H/S [T: 52c, RPM: 3196, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:49:59] GPU2:    411.0 H/S [T: 49c, RPM: 3297, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU3:    464.0 H/S [T: 50c, RPM: 3384, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU4:    461.0 H/S [T: 51c, RPM: 3305, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU5:    494.0 H/S [T: 52c, RPM: 3378, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU6:    494.0 H/S [T: 52c, RPM: 3354, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU7:    458.0 H/S [T: 53c, RPM: 3229, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU8:    499.0 H/S [T: 50c, RPM: 3393, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU9:    499.0 H/S [T: 53c, RPM: 3234, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU10:    493.0 H/S [T: 50c, RPM: 3116, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU11:    461.0 H/S [T: 52c, RPM: 3295, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] Total:   5686.0 H/S

what card of this Rig?

maxmil

newbie

Activity: 1

Merit: 0

i have 12 gpu rx 580 already try lastest driver ,but i always bsod got thread gpu crash when mining about 5-60 min

anyone mining use 12 gpu with windows here ?

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: Bulitt on April 29, 2018, 05:31:32 PM

Im curious if anyone is going to mine MoneroV? I dont even know if it will just work with regular CryptonightV7 or it needs specific compatibility...

Depends on the pools available, but, yeah, likely.

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 291. (Read 237280 times)