Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 296. (Read 237247 times)
April 28, 2018, 07:09:08 AM
Cast xmr works better for vega and heavy. Srbminer is best for v7
April 28, 2018, 06:43:30 AM
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted.
April 28, 2018, 06:12:46 AM
Any advice please?
4 x Vega 56 Reference cards with Vega 64 BIOS.
Powerplay tables applied and settings applied with OverdriveNTool.
Getting 2010H/s per card mining CryptonightV7 which is great but now I want to mine Haven (Heavy) and I am unable to get more than 1380H/s per card.
SRB config when mining Haven:
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 56, "worksize" : 16, "threads" : 2},
https://www.upload.ee/image/8377665/Vega_Heavy.jpg
Thanks!
4 x Vega 56 Reference cards with Vega 64 BIOS.
Powerplay tables applied and settings applied with OverdriveNTool.
Getting 2010H/s per card mining CryptonightV7 which is great but now I want to mine Haven (Heavy) and I am unable to get more than 1380H/s per card.
SRB config when mining Haven:
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 56, "worksize" : 16, "threads" : 2},
https://www.upload.ee/image/8377665/Vega_Heavy.jpg
Thanks!
try worksize" : 8
and start with 54 intensity if not work down gpu and mem 10% and start again . hbb memory not start corect.
after start corect chg memory and gpu back.
my v7 work1950 hevy 1500 but for heavy i must push down memory and gpu 2%
i use ony 900mv for gpu and memory
April 28, 2018, 06:08:49 AM
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted.
April 28, 2018, 05:58:27 AM
Hello, is it possible to add an option to disable/enable windows gpus before start mining ?
Thanks
Thanks
April 28, 2018, 05:57:45 AM
Any advice please?
4 x Vega 56 Reference cards with Vega 64 BIOS.
Powerplay tables applied and settings applied with OverdriveNTool.
Getting 2010H/s per card mining CryptonightV7 which is great but now I want to mine Haven (Heavy) and I am unable to get more than 1380H/s per card.
SRB config when mining Haven:
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 56, "worksize" : 16, "threads" : 2},
Thanks!
4 x Vega 56 Reference cards with Vega 64 BIOS.
Powerplay tables applied and settings applied with OverdriveNTool.
Getting 2010H/s per card mining CryptonightV7 which is great but now I want to mine Haven (Heavy) and I am unable to get more than 1380H/s per card.
SRB config when mining Haven:
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 56, "worksize" : 16, "threads" : 2},
Thanks!
April 28, 2018, 05:34:58 AM
What is the best intensity for RX 580 8GB you guys getting?
April 28, 2018, 05:32:02 AM
Someone can help me?
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
What algo are you mining and what are your current settings? Easier to start from where you are to see if anyone can help.
1) BlockChain Drivers: 900/920 -100mV:
intensity 106-112, worksize 8, threads 2 - 1800-1860 h/s
and on
2) Adrenalin 18.3.4: 1500/920
intensity 106-112, worksize 8, threads 2 - 1800-1860 h/s
Errors appear on 920+ memory
April 28, 2018, 04:52:48 AM
For H5GQ8H24MJR try this folks:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16
Thank you so much.
These are the best timings for my Asus RX 580 Dual OC.
Now I get 1000 H/s in cryptonightV7 & more in heavy
Edit:
GPU 1250 - Memory 2120 MHz (Stable for now, at 2130 I get artifacts on screen)
"intensity" : 122, "worksize" : 8, "threads" : 2
Try to press the "h" key about minute and look. I think that you'll see that sometimes speed will be "nan H/s". This means that intensity is too high.
April 28, 2018, 04:41:47 AM
v1.4.9
all work fine - 3*vega56
"cryptonight_type" : "heavy",
"double_threads" : true,
"gpu_conf" :
[
{ "id" : 0, "intensity" :56, "worksize" : 8, "threads" : 2, "target_temperature" : 59},
{ "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 58},
{ "id" : 2, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 57},
https://image.prntscr.com/image/LbOnbAGJSR65QvOTuaZPGg.jpg
all work fine - 3*vega56
"cryptonight_type" : "heavy",
"double_threads" : true,
"gpu_conf" :
[
{ "id" : 0, "intensity" :56, "worksize" : 8, "threads" : 2, "target_temperature" : 59},
{ "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 58},
{ "id" : 2, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 57},
https://image.prntscr.com/image/LbOnbAGJSR65QvOTuaZPGg.jpg
Your can share OverClock with overdriveNtool.
I'm mine with SRBMinerTool but hashrate not good Cryptonight V7 run with 1400, CryptoNight Heavy run 1200
OverDriveNTool
https://ibb.co/dx6Pgx
i not use overdrive. i use watman. on pictures see gpu mhz and i use 900mv for gpu and mem
1400for v7 and 1200 for heavy is to smal HR.
HBB memory stack - when hbb not start i chg memory to 900mhz and gpu to -10% and start and start and start .and HR go on normal.
when start ok i bask gpu and mem to normal.
i try intensity 57 or 58 gor hevy and HR dovn to 1200 . 56 is max intensiti for me. try with 50 intensity and go up for 2 and see.
in v7 my max intesitiy is 120. try with 114 -116 -118 - i have 1950Hr in v7
April 28, 2018, 04:00:11 AM
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted.
April 28, 2018, 03:55:24 AM
Dok I am having kinda of an issue with my rig when I remotely connect to it via TeamViewer. After 30-40 seconds one of my card crashes and the miner restarts.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
Is the card thats crashing connected to a Monitor?
The card connected to the monitor is using more memory than others, especially in Windows.
You can solve this by lowering intensity on the monitor connected card or using an iGPU.
April 28, 2018, 03:39:30 AM
Dok I am having kinda of an issue with my rig when I remotely connect to it via TeamViewer. After 30-40 seconds one of my card crashes and the miner restarts.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
I have noticed also the same problem, but I experience it with another miners too. The problem may be with your GPU itself.
don't know really what could cause this issue, is the card that is crashing the main one, that has a dongle or monitor plugged in ?
April 28, 2018, 03:11:14 AM
Dok I am having kinda of an issue with my rig when I remotely connect to it via TeamViewer. After 30-40 seconds one of my card crashes and the miner restarts.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
I have noticed also the same problem, but I experience it with another miners too. The problem may be with your GPU itself.
April 28, 2018, 03:01:38 AM
Someone can help me?
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
You can use 1167 / 2100 for example...
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
Hi
in Sapphire Nitro+Rx580 8GB
1400 / 2250 / -100mv - is too high?
thanks!
I have 1430 core / 2100 mem / 1050mv => 1100 h/s. ~110 Wattin Sapphire Nitro+Rx580 8GB
1400 / 2250 / -100mv - is too high?
thanks!
You can use 1167 / 2100 for example...
What algo are you mining and what are your current settings? Easier to start from where you are to see if anyone can help.
April 28, 2018, 02:52:01 AM
Dok I am having kinda of an issue with my rig when I remotely connect to it via TeamViewer. After 30-40 seconds one of my card crashes and the miner restarts.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
April 28, 2018, 02:30:25 AM
Someone can help me?
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
You can use 1167 / 2100 for example...
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
Hi
in Sapphire Nitro+Rx580 8GB
1400 / 2250 / -100mv - is too high?
thanks!
I have 1430 core / 2100 mem / 1050mv => 1100 h/s. ~110 Wattin Sapphire Nitro+Rx580 8GB
1400 / 2250 / -100mv - is too high?
thanks!
You can use 1167 / 2100 for example...
April 28, 2018, 02:18:51 AM
Running O.K. on RX 570's.
Speed is not quite there yet ( NormalV7 ) because of the straps, but at least its stable.
Keep up the good work sir
You must point that 570 is Sapphire Nitro+. It's good quality cards. On not so good cards like MSI Gaming X (not plus) 2100MHz isn't stable on doctor's strap. Max 2075-2085MHz and it's only 950-960 h/s gives. On 2100MHz comp hangs after few minutes same as 2150, wich hang comp nearly after launch of miner.Speed is not quite there yet ( NormalV7 ) because of the straps, but at least its stable.
Keep up the good work sir
Must say - anyway doctor's strap "999..." is a little better than "777..." strap. It gives max 930 h/s on 2100-2125MHz.
P.S. I think that doctor's strap can be improved for stability to reach more memory speed on not good quality cards, but it'll lower hashrate... It's need to work on it and test.
Doctor, can you modify your strap a little for improve stability? At least say what it's need to change and I can test it on MSI.
as you said, it needs a lot of trial and test. I don't have time to play with it. You got the strap, now its on you to modify it to work as you want.
And don't be sad that SRBminer is faster than GGS, Zawawa will probably tune it more. Maybe you can ask him to help you modify the strap to make it work better on MSI.
April 28, 2018, 02:11:31 AM
For H5GQ8H24MJR try this folks:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16
Thank you so much.
These are the best timings for my Asus RX 580 Dual OC.
Now I get 1000 H/s in cryptonightV7 & more in heavy
Edit:
GPU 1250 - Memory 2120 MHz (Stable for now, at 2130 I get artifacts on screen)
"intensity" : 122, "worksize" : 8, "threads" : 2
April 28, 2018, 02:05:11 AM
Hi
in Sapphire Nitro+Rx580 8GB
1400 / 2250 / -100mv - is too high?
thanks!
in Sapphire Nitro+Rx580 8GB
1400 / 2250 / -100mv - is too high?
thanks!
Jump to: