Swedish ASIC miner company kncminer.com - page 299.

s1gs3gv

legendary

Activity: 1316

Merit: 1014

ex uno plures

Quote from: Searing on July 13, 2014, 11:15:42 PM

they can be leisurely ...they have the datahall all of our $$ no refund..why drive difficulty up by going 24/7 and pay OT etc when it would not benefit their datahall in any way

6 hour work days coming for the Swedes
http://www.entrepreneur.com/article/235283

Old_Dominion

newbie

Activity: 8

Merit: 0

Quote from: user27 on July 14, 2014, 12:46:26 AM

Quote from: helmax on July 13, 2014, 04:01:46 PM

people any help?
is show me this errors everytime
never stop
this is normal?

Same shit, different Neptune:

I snipped out the images to avoid it being a giant post. I saw this at the console about 15 minutes after I flashed the 1.0 firmware. It suddenly started spamming the communications failure messages. I reset the miner to defaults and power cycled it (switched power supplies on and off), set my clocks back up to 500Mhz, and I have not gotten a repeat.

My experience so far with 1.0 has not been a performance improvement so much as lower variance in hash rate (so RMS hash rate is slightly higher at the pool - 3.55Th/s). I continue to run at 500Mhz on all cores without having to make voltage changes. Hottest VRM hits about 96C, the room is around 22C.

I see The Avenger still has sand in his mangina. What kind of a loser has this much time to troll forums?

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: user27 on July 14, 2014, 12:46:26 AM

Quote from: helmax on July 13, 2014, 04:01:46 PM

people any help?
is show me this errors everytime
never stop
this is normal?

Same shit, different Neptune:

[IMG]

i think a die is coming on and off. you look to be getting 3.35 which is pretty good. you could try the advanced tab on the gui to identify which one it is, and adjust the voltage till it runs okay. I dont know which way to tell you to go, probably up.
If you have another PSU handy, try that. some deliver better than others

user27

sr. member

Activity: 266

Merit: 250

Quote from: helmax on July 13, 2014, 04:01:46 PM

people any help?
is show me this errors everytime
never stop
this is normal?

Same shit, different Neptune:

Beans

hero member

Activity: 518

Merit: 500

Quote from: crashoveride54902 on July 13, 2014, 09:37:22 PM

Quote from: Phoenix1969 on July 13, 2014, 09:16:29 PM

one interesting tidbit... My brother was able to sign into his Imac at home in maui from about 4000 miles away to access the Neppies web GUI through remote desktop.... using his iphone! lol. He can flash firmware, reboot, all of it right from his iphone.

ya not that hard with teamviewer...i use the same thing Wink

course i don't have a fancy neppy and really don't need it for the jups since they are highly stable...almost shockingly stable coming from knc :O

My jups are overclocked and it's 106 degrees in the room. They don't miss a beat.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: DumDumz on July 13, 2014, 10:14:37 PM

if we do not have any Substantial Concrete news by this month end .. to proof they are taking action practically and not just talk and talk..and talk ..this project of theirs may not materialize at all and maybe the op could just closed this thread and not waste our time and hope on them. How on earth they are going to succeed if they only work 8 hours a day and 5 days a week? while the competitor overseas is working 24 hours a day by shifts and 7 days a week. To them maybe speed and timing is not reverent. Wow, thing of it maybe I should move to Sweden..

they can be leisurely ...they have the datahall all of our $$ no refund..why drive difficulty up by going 24/7 and pay OT etc when it would not benefit their datahall in any way

leisurely works

Searing

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: DumDumz on July 13, 2014, 10:14:37 PM

if we do not have any Substantial Concrete news by this month end .. to proof they are taking action practically and not just talk and talk..and talk ..this project of theirs may not materialize at all and maybe the op could just closed this thread and not waste our time and hope on them. How on earth they are going to succeed if they only work 8 hours a day and 5 days a week? while the competitor overseas is working 24 hours a day by shifts and 7 days a week. To them maybe speed and timing is not reverent. Wow, thing of it maybe I should move to Sweden..

What are you referring to? News about what? Taking action on what?
Batch one is hashing away as far as I know... our batch ones came on wednesday
Batch zero 2 weeks ago

DumDumz

full member

Activity: 126

Merit: 100

★☆★Bitin.io★☆★

if we do not have any Substantial Concrete news by this month end .. to proof they are taking action practically and not just talk and talk..and talk ..this project of theirs may not materialize at all and maybe the op could just closed this thread and not waste our time and hope on them. How on earth they are going to succeed if they only work 8 hours a day and 5 days a week? while the competitor overseas is working 24 hours a day by shifts and 7 days a week. To them maybe speed and timing is not reverent. Wow, thing of it maybe I should move to Sweden..

crashoveride54902

hero member

Activity: 784

Merit: 504

Dream become broken often

Quote from: Phoenix1969 on July 13, 2014, 09:16:29 PM

one interesting tidbit... My brother was able to sign into his Imac at home in maui from about 4000 miles away to access the Neppies web GUI through remote desktop.... using his iphone! lol. He can flash firmware, reboot, all of it right from his iphone.

ya not that hard with teamviewer...i use the same thing Wink

course i don't have a fancy neppy and really don't need it for the jups since they are highly stable...almost shockingly stable coming from knc :O

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

one interesting tidbit... My brother was able to sign into his Imac at home in maui from about 4000 miles away to access the Neppies web GUI through remote desktop.... using his iphone! lol. He can flash firmware, reboot, all of it right from his iphone.

crashoveride54902

hero member

Activity: 784

Merit: 504

Dream become broken often

Quote from: Phoenix1969 on July 13, 2014, 08:12:23 PM

Quote from: Searing on July 13, 2014, 08:10:02 PM

Quote from: Phoenix1969 on July 13, 2014, 07:31:23 PM

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

er NO A/C either right?

Searing

12volt exhaust fan straight above venting roof. Powered by a psu. hehe
It is inside a closet, in a garage in maui where its 90F outside and baking cooking hot in that garage. At least 100 degrees(F) ambient room temp at the hottest part of the day. I couldn't stand to be near them too long. 10 cubes in that little closet is really too much on top of having two xantrax 6000 controller chargers running in the same little closet. But I'm the "Hot hashing Pioneer"...remember hahaha.. hope it all doesnt burst into flames, its probably drying out the wood shelving really well. perfect kindeling. It looks like all the corsairs came with 16awg wire, and all the pci connections are fine. Some of the ax1200 psu's, although identical, would not survive startup, while others were fine. (2 cubes each) I ended up using the old cx600's on 2 cubes(1 each) Those work great. I used a cx850 for a cube and controller combo as well, also great.

holy hot hell furnace ya got there...you should put a web cam on just in case it does go so you can watch it go up Grin

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: Searing on July 13, 2014, 08:10:02 PM

Quote from: Phoenix1969 on July 13, 2014, 07:31:23 PM

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

er NO A/C either right?

Searing

12volt exhaust fan straight above venting roof. Powered by a psu. hehe
It is inside a closet, in a garage in maui where its 90F outside and baking cooking hot in that garage. At least 100 degrees(F) ambient room temp at the hottest part of the day. I couldn't stand to be near them too long. 10 cubes in that little closet is really too much on top of having two xantrax 6000 controller chargers running in the same little closet. But I'm the "Hot hashing Pioneer"...remember hahaha.. hope it all doesnt burst into flames, its probably drying out the wood shelving really well. perfect kindeling. It looks like all the corsairs came with 16awg wire, and all the pci connections are fine. Some of the ax1200 psu's, although identical, would not survive startup, leaving dead cubes or dies while others were fine. (2 cubes each) I ended up using the old cx600's on 2 cubes(1 each) Those work great. I used a cx850 for a cube and controller combo as well, also great. All Asic temps look to be fine, around 60-65C All the Vrm's are 90-95C

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Phoenix1969 on July 13, 2014, 07:31:23 PM

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

er NO A/C either right?

Searing

crashoveride54902

hero member

Activity: 784

Merit: 504

Dream become broken often

Quote from: RenHoek on July 13, 2014, 07:25:49 PM

Quote from: Searing on July 13, 2014, 12:56:36 AM

Quote from: Phoenix1969 on July 12, 2014, 10:02:38 PM

kncminer.com offline or DDOS attack? Eligius seems to be taking a shit as well

yeppers can't get on www.kncminer.com either been that way for a couple hours now I think

Searing

kncwallet.com is also down. i hope the bastards are out of businnes now!° Grin

+1 me too me too...someone take down their DC too Grin

alls fair in love n war Wink

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.

Quote from: Phoenix1969 on July 13, 2014, 07:31:23 PM

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

Congrats. My Neppy is a solid 3.4TH/s at the pool on FW1.0 with stock settings. I do use 2-to-1 PCIe cables from Cablez so that I can use the two Corsair AX1200i PSUs I purchased earlier... the AX1200i trips it's Over Current Protection otherwise.

I'm happy with the hardware so far.

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.