Nvidia 3060, T-rex last version and also last drivers on Windows 10.
Started dual mining ETH + RVN but RVN doesn't get shares and the pool shows it as inactive. What am I doing wrong?
Reported MH/s: ETH: ~15 RVN: ~11.5
These are my parameters in the batch (recommended):
t-rex.exe -a ethash --lhr-algo kawpow -o stratum+tcp://us1.ethermine.org:4444 -u ETHAddress -p 111 -w rig0 --url2 stratum+tcp://stratum-ravencoin.flypool.org:3333 --user2 RVNAddress.rig0 --pass2 111 --fan t:55 --pl 60 --cclock 0 --mclock 1300
pause
Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 11. (Read 174699 times)
I see here that LHR is up to 74% of the full power of a card which I am rounding at 75% and this means that I should also look for LHR cards right now as the hash rates are pretty impressive with this unlock from T-Rex miner.I saw 89 Mhsh for 3080 ti which is a great number and the same near 60 Mhsh for a 3070 ti meaning it is doing the same as 3070 non LHR,I am impressed by this.Well this gave me hope that even for LHR cards I should buy them because I am assuming the RTX 3060 should do 40 Mhsh with T-Rex or am I missing something?
I can find one RTX 3060 for as low as 750 EUR brand new LHR.
I can find one RTX 3060 for as low as 750 EUR brand new LHR.
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 * ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
would anyone give the result
hashrate given by a regular 3080 video card with lhr?
https://imgur.com/AcLZqqt
I do not deny that such a result is possible, but my video card gives out otherwise
Hi
Worked like a charm so far
- Somehow every instance of Trex is suddenly using 11-12% CPU of Ryzen 5. I had to do a Bios reset. Before it was like below 1% CPU usage per instance.
I also changed some system settings because recently I added from stock a GTX 970 would not work in Trex for Ergo, ETC.
"Can't find nonce with device. Cuda exception. Cuda error not supported."
It works fine in miniZ miner.
Any Idea about sudden high CPU Usage?
Maxwell still supported? I read it should be.
Best regards
If you experience high CPU usage by T-Rex miner process on Windows and your NVIDIA drivers are 471.11 or newer, the most likely cause is the "Hardware-accelerated GPU Scheduling" feature.Worked like a charm so far
- Somehow every instance of Trex is suddenly using 11-12% CPU of Ryzen 5. I had to do a Bios reset. Before it was like below 1% CPU usage per instance.
I also changed some system settings because recently I added from stock a GTX 970 would not work in Trex for Ergo, ETC.
"Can't find nonce with device. Cuda exception. Cuda error not supported."
It works fine in miniZ miner.
Any Idea about sudden high CPU Usage?
Maxwell still supported? I read it should be.
Best regards
To disable it, go to Start -> Settings -> Display -> Graphics settings, and turn it off.
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 * ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
would anyone give the result
hashrate given by a regular 3080 video card with lhr?
https://imgur.com/AcLZqqt
I do not deny that such a result is possible, but my video card gives out otherwise
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 * ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
would anyone give the result
hashrate given by a regular 3080 video card with lhr?
https://imgur.com/AcLZqqt
On 3080 normal AORUS
0: Gigabyte NVIDIA RTX 3080 10GB94.02.71.80.06
1455/10151
70.91 HASH
SImplemining
0: Gigabyte NVIDIA RTX 3080 10GB94.02.71.80.06
1455/10151
70.91 HASH
SImplemining
Friends, I have the following problem, it doesn't show clocks and power consumption, any tips?
windows 10 + 472.12 nvidia driver
windows 10 + 472.12 nvidia driver
solved, formatted and re-installed windows 10, and installed the 472.12 nv driver cleanly
Colorful RTX 3080 Ti Vulkan OC V
core fixed 1185 MHz
memory +1100 MHz
89 MH/s
255 W
I think this is due to the fact that with an increase in the clock frequency of the memory, the total consumption of the card increases and ultimately it exceeds a certain limit set for the LHR to operate
Hi! With versions 0.24.5-0.24.7 I have a problem with dual mining ETH+ERG on 3060ti. I've tried to set --dataset-mode=1, run without any overclock but without success. On version 0.24.2 everything works fine.
Quote
20211114 09:34:15 conn1: Using protocol: stratum1.
20211114 09:34:15 conn1: Authorizing...
20211114 09:34:15 conn1: Authorized successfully.
20211114 09:34:15 conn1: ethash epoch: 453, diff: 4.29 G
20211114 09:34:15 conn2: Extranonce is set to: 6722
20211114 09:34:15 conn2: Authorizing...
20211114 09:34:15 GPU #0: intensity 21.3
20211114 09:34:15 conn2: Authorized successfully.
20211114 09:34:15 conn2: autolykos2 block: 619700, diff: 4.00 G
20211114 09:34:20 GPU #0: generating DAG 4.54 GB for epoch 453 ...
20211114 09:34:34 GPU #0: DAG generated [crc: 74767b93, time: 14358 ms], memory left: 2.02 GB
20211114 09:34:34 TREX: Can't find nonce with device [ID=0, GPU #0], cuda exception: CUDA_ERROR_ILLEGAL_ADDRESS, try to reduce overclock to stabilize GPU state
20211114 09:34:34 WARN: Miner is going to shutdown...
20211114 09:34:34 Main loop finished. Cleaning up resources...
20211114 09:34:34 ApiServer: stopped listening on 0.0.0.0:5555
20211114 09:34:35 T-Rex finished.
20211114 09:34:15 conn1: Authorizing...
20211114 09:34:15 conn1: Authorized successfully.
20211114 09:34:15 conn1: ethash epoch: 453, diff: 4.29 G
20211114 09:34:15 conn2: Extranonce is set to: 6722
20211114 09:34:15 conn2: Authorizing...
20211114 09:34:15 GPU #0: intensity 21.3
20211114 09:34:15 conn2: Authorized successfully.
20211114 09:34:15 conn2: autolykos2 block: 619700, diff: 4.00 G
20211114 09:34:20 GPU #0: generating DAG 4.54 GB for epoch 453 ...
20211114 09:34:34 GPU #0: DAG generated [crc: 74767b93, time: 14358 ms], memory left: 2.02 GB
20211114 09:34:34 TREX: Can't find nonce with device [ID=0, GPU #0], cuda exception: CUDA_ERROR_ILLEGAL_ADDRESS, try to reduce overclock to stabilize GPU state
20211114 09:34:34 WARN: Miner is going to shutdown...
20211114 09:34:34 Main loop finished. Cleaning up resources...
20211114 09:34:34 ApiServer: stopped listening on 0.0.0.0:5555
20211114 09:34:35 T-Rex finished.
Friends, I have the following problem, it doesn't show clocks and power consumption, any tips?
windows 10 + 472.12 nvidia driver
https://i.imgur.com/osmzhaa.png
https://i.imgur.com/EpqeGtE.png
windows 10 + 472.12 nvidia driver
https://i.imgur.com/osmzhaa.png
https://i.imgur.com/EpqeGtE.png
solved, formatted and re-installed windows 10, and installed the 472.12 nv driver cleanly
https://i.imgur.com/6QHCfQo.png
EVGA GTX 1070
core +150 MHz
memory +450MHz
28 MH/s
130 W
Palit RTX 3070 Ti Gaming Pro
core fixed 1050 MHz
memory +1100 MHz
59 MH/s
170W
Colorful RTX 3080 Ti Vulkan OC V
core fixed 1185 MHz
memory +1100 MHz
89 MH/s
255 W
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 * ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
would anyone give the result
hashrate given by a regular 3080 video card with lhr?
Friends, I have the following problem, it doesn't show clocks and power consumption, any tips?
windows 10 + 472.12 nvidia driver
https://i.imgur.com/osmzhaa.png
https://i.imgur.com/EpqeGtE.png
windows 10 + 472.12 nvidia driver
https://i.imgur.com/osmzhaa.png
https://i.imgur.com/EpqeGtE.png
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
If you want to dual mine with a non-LHR card you need to manually specify "--lhr-tune 30" (or whatever ETH percentage you like) in your bat file.
It gives an error: parse error: Argument: -algo
T-Rex 0.24.7
Bug fixes:
* Some command line arguments don't take precedence over the values set in a config file (e.g. "--lhr-autotune-step-size")
* (WebUI) Performance degradation introduced in 0.24.6
* (WebUI) Monitoring page shows a blank page if you had 15M or 2H graph views selected on while using an older version of T-Rex
* (WebUI) Impossible to set LHR tune values with decimal point
HiveOS users: many of you complained that your hashrate on LHR cards is fluctuating too much compared to the Windows version. The reason is HiveOS sets "hashrate-avr": 30 for T-Rex causing it to report 30-seconds average hashrate as opposed to 1-minute average (default).
A temporary solution would be to edit your flight sheet and manually add "hashrate-avr": 60 to the "Extra config arguments" field. Otherwise, we've been told there will be a HiveOS release that fixes it permanently.
Bug fixes:
* Some command line arguments don't take precedence over the values set in a config file (e.g. "--lhr-autotune-step-size")
* (WebUI) Performance degradation introduced in 0.24.6
* (WebUI) Monitoring page shows a blank page if you had 15M or 2H graph views selected on while using an older version of T-Rex
* (WebUI) Impossible to set LHR tune values with decimal point
HiveOS users: many of you complained that your hashrate on LHR cards is fluctuating too much compared to the Windows version. The reason is HiveOS sets "hashrate-avr": 30 for T-Rex causing it to report 30-seconds average hashrate as opposed to 1-minute average (default).
A temporary solution would be to edit your flight sheet and manually add "hashrate-avr": 60 to the "Extra config arguments" field. Otherwise, we've been told there will be a HiveOS release that fixes it permanently.
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
If you want to dual mine with a non-LHR card you need to manually specify "--lhr-tune 30" (or whatever ETH percentage you like) in your bat file.
Also +1 on Flux
Any chance to add zelcah (flux) ?
I love T-Rex but, want to start mining flux, and at this time only Gminer or zmini can mine flux.
I love T-Rex but, want to start mining flux, and at this time only Gminer or zmini can mine flux.
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 * ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
would anyone give the result
hashrate given by a regular 3080 video card with lhr?
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
If you want to dual mine with a non-LHR card you need to manually specify "--lhr-tune 30" (or whatever ETH percentage you like) in your bat file.
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
* ("ethash", "autolykos2") New "--lhr-autotune-step-size" and "--lhr-autotune-interval" parameters for finer control of LHR unlock behaviour
* ("ethash", "firopow") Add ETH+FIRO dual mining (use the same OC settings as ETH+RVN)
* ("autolykos2") New "--dataset-mode" parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode (default)
* Add SOCKS5 proxy support (see "--proxy" parameter)
* New "--temperature-color-mem" parameter to control memory temperature highlighting in console and WebUI
* (WebUI) Multiple improvements:
- 24H view on the graph
- Ability to hide individual charts (power, avg hashrate etc.) on the graph
- Recompute average hashrate/power when zooming in the graph
- Ability to reorder/hide GPU table columns
- Auto-propagation of the miner node list to all nodes
Bug fixes:
* ("ethash") RTX 3060 GA104 is not recognised as an LHR card
* Veriblock mining is broken since 0.24.2
* (Linux) Log file contains ANSI escape sequences
* (WebUI) Log file retrieved through WebUI has trailing zeros
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default.
The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters
(in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
* ("ethash", "autolykos2") New "--lhr-autotune-step-size" and "--lhr-autotune-interval" parameters for finer control of LHR unlock behaviour
* ("ethash", "firopow") Add ETH+FIRO dual mining (use the same OC settings as ETH+RVN)
* ("autolykos2") New "--dataset-mode" parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode (default)
* Add SOCKS5 proxy support (see "--proxy" parameter)
* New "--temperature-color-mem" parameter to control memory temperature highlighting in console and WebUI
* (WebUI) Multiple improvements:
- 24H view on the graph
- Ability to hide individual charts (power, avg hashrate etc.) on the graph
- Recompute average hashrate/power when zooming in the graph
- Ability to reorder/hide GPU table columns
- Auto-propagation of the miner node list to all nodes
Bug fixes:
* ("ethash") RTX 3060 GA104 is not recognised as an LHR card
* Veriblock mining is broken since 0.24.2
* (Linux) Log file contains ANSI escape sequences
* (WebUI) Log file retrieved through WebUI has trailing zeros
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
I keep getting an error with ethash algo.
Jump to: