Bitcoin Forum>Bitcoin>Mining>Mining support
Pages:
Author

Topic: T17/S17 malfunction: cases, solutions, remedies, RMA history - page 6. (Read 7035 times)

wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 11, 2021, 07:11:32 AM
#326
Quote from: RRZP028 on January 10, 2021, 06:26:48 PM
I bought a tester from Zeusbtc two months ago, I can tell you that there is still no successful result regarding the repair of my miners, first the tester is of very poor quality, it can be seen that they looked to save on everything, asik 0 on almost all boards and cooperation with them grade 2

Yeah, the tester is only a small part of being able to repair hashboards. The output of the test is only sometimes useful, most of the time you need the fixture just to operate the board while you use an oscilloscope and/or voltmeter to measure signals at the test points.

Just FYI, with the COVID situation, Bitmain now offers an online repair course for $500. I haven't taken it so I'm not sure how useful it is, but once you complete it you get access to all of their official repair manuals and downloads, and you can order Bitmain's test fixture and spare parts direct from them. Previously it was $1000 and you had to travel to one of their sites to take the 1-week long course.

All of the testers of that type are built similarly ... I agree that it is not the best. Just kind of hacked together. I've ordered a different tester from here https://tester.asic.repair/en. It was much more expensive and ships from Russia but looks like a much better product. Slow shipping from Russia to USA though ... ordered a month ago and the tracking estimated arrival is still 3 to 5 more weeks...
RRZP028
newbie
Activity: 13
Merit: 6
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 10, 2021, 06:26:48 PM
#325
I bought a tester from Zeusbtc two months ago, I can tell you that there is still no successful result regarding the repair of my miners, first the tester is of very poor quality, it can be seen that they looked to save on everything, asik 0 on almost all boards and cooperation with them grade 2
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 02, 2021, 05:02:31 PM
#324
I am 99% positive that it is a hardware issue, however, i would still test the miner with custom firmware since sometimes it could fix the issue, try vnish (asic.to or awesomeminer), chances are low but you have nothing to lose.
favebook
sr. member
Activity: 604
Merit: 416
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 02, 2021, 05:00:50 PM
#323
Quote from: mikeywith on January 02, 2021, 12:19:13 PM
This is the problem, Chain 1 shows only 40 asic when it's supposed to signal 48 chips, so there seem to be an issue with the 40th or 41th chip, usually, with these 17 series mining gears it's a loose heatsink that needs soldering.

With that being said, where is your chain 0 and chain 2, does this miner run with only 1 hashboard?

It does have three chains, it just skips them in beginning. Loose heatsinks (they fell off almost certainly) are almost 100% problem on those 2, while chain 1 is just loose heatsinks but still haven't fallen of fully.

Quote from: spyroslo on January 02, 2021, 01:36:07 PM
Thank you for you reply. Do you believe that it is a hardware problem or software? The miner has install free hashboard.

Hardware 100%, check other posts here, you will find very similar or identical problems.
spyroslo
newbie
Activity: 4
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 02, 2021, 01:36:07 PM
#322
Thank you for you reply. Do you believe that it is a hardware problem or software? The miner has install free hashboard.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 02, 2021, 12:19:13 PM
#321
Quote from: spyroslo on January 02, 2021, 11:37:06 AM
2021-01-02 16:33:31 driver-btm-api.c:942:check_asic_number: Chain 1 only find 40 asic, will power off hash board 1

This is the problem, Chain 1 shows only 40 asic when it's supposed to signal 48 chips, so there seem to be an issue with the 40th or 41th chip, usually, with these 17 series mining gears it's a loose heatsink that needs soldering.

With that being said, where is your chain 0 and chain 2, does this miner run with only 1 hashboard?
spyroslo
newbie
Activity: 4
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 02, 2021, 11:37:06 AM
#320
Hi and hapy new year

i have two s17_56h in one i take erros and hi does not start

Any ideas ....?

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203612K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25764K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12724K (cce94000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 25/10, WL threshold: 4096, image sequence number: 2419912869
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 1303F5C2-F3EF-4059-9B98-C469B28B1788, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 443/125, WL threshold: 4096, image sequence number: 2324953515
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8C5051EC-2BDF-4773-B69A-558999E9CEC7, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-01-02 16:31:17 driver-btm-api.c:542:init_freq_mode: This is scan-user version
2021-01-02 16:31:17 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version     = 1
2021-01-02 16:31:17 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab        = 1
2021-01-02 16:31:17 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
2021-01-02 16:31:17 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
2021-01-02 16:31:17 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
2021-01-02 16:31:17 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2021-01-02 16:31:17 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2021-01-02 16:31:17 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-01-02 16:31:17 thread.c:783:create_read_nonce_reg_thread: create thread
2021-01-02 16:31:23 driver-btm-api.c:972:init_miner_version: miner ID : 80680c0e7510481c
2021-01-02 16:31:23 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2021-01-02 16:31:29 driver-btm-api.c:616:get_product_id: product_id[0] = 0
2021-01-02 16:31:29 driver-btm-api.c:616:get_product_id: product_id[1] = 0
2021-01-02 16:31:29 driver-btm-api.c:616:get_product_id: product_id[2] = 0
2021-01-02 16:31:29 driver-btm-api.c:560:_set_project_type: project:1
2021-01-02 16:31:29 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
2021-01-02 16:31:29 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2021-01-02 16:31:29 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2021-01-02 16:31:29 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2021-01-02 16:31:29 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-01-02 16:31:29 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-01-02 16:31:29 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-01-02 16:31:30 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2021-01-02 16:31:38 driver-btm-api.c:321:init_pic: Chain[0] PIC init failed!
2021-01-02 16:31:38 driver-btm-api.c:198:set_miner_status: ERROR_PIC_LOST
2021-01-02 16:31:38 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-01-02 16:31:54 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xff
2021-01-02 16:31:55 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-01-02 16:31:57 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-01-02 16:32:05 driver-btm-api.c:321:init_pic: Chain[2] PIC init failed!
2021-01-02 16:32:05 driver-btm-api.c:198:set_miner_status: ERROR_PIC_LOST
2021-01-02 16:32:05 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-01-02 16:32:22 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xff
2021-01-02 16:32:22 thread.c:778:create_pic_heart_beat_thread: create thread
2021-01-02 16:32:22 power_api.c:207:power_init: Power init:
2021-01-02 16:32:22 power_api.c:208:power_init: current_voltage_raw = 0
2021-01-02 16:32:22 power_api.c:209:power_init: highest_voltage_raw = 2100
2021-01-02 16:32:22 power_api.c:210:power_init: working_voltage_raw = 1830
2021-01-02 16:32:22 power_api.c:211:power_init: higher_voltage_raw  = 1950
2021-01-02 16:32:22 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-01-02 16:32:54 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-01-02 16:32:56 power_api.c:87:check_voltage_multi: retry time: 0
2021-01-02 16:32:58 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.455156
2021-01-02 16:32:58 power_api.c:50:_get_avg_voltage: average_voltage = 21.455156
2021-01-02 16:32:58 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.46, check voltage passed.
2021-01-02 16:32:58 uart.c:71:set_baud: set fpga_baud to 115200
2021-01-02 16:33:09 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 0
2021-01-02 16:33:20 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 1
2021-01-02 16:33:31 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 2
2021-01-02 16:33:31 driver-btm-api.c:942:check_asic_number: Chain 1 only find 40 asic, will power off hash board 1
2021-01-02 16:33:32 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2021-01-02 16:33:32 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2021-01-02 16:33:32 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-01-02 16:33:32 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 21, 2020, 10:52:21 PM
#319
First two miners are finding 0 chips on one hashboard at startup. Not something that is generally fixable without getting the hashboard on a test fixture and tracking down the issue. As mikeywith said, your best option is probably to try to just run with 2 hashboards each. If you can find a repair shop reasonably close you could consider sending them to get repaired, but by the time you pay shipping both ways and repair of 2 hashboards it would probably be > $500. Sending them back to Bitmain is not a good option in my opinion. I RMAed a S17pro under warranty to Bitmain's repair facility in California in May and still don't have it back.

As for the 3rd one, it doesn't see any chips on bootup from any hashboard. Not likely that all 3 hashboards decided to die at the same time. So, like mikeywith suggested, you should see if your host will swap a PSU to see if it runs with a good one. If that doesn't do it, you might see if they'll swap the control board out.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 21, 2020, 05:29:16 PM
#318
For the first miner:

Code:
2020-10-15 11:31:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-10-15 11:32:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-10-15 11:32:37 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0

I would just mine with 2 hash boards rather than sending the gear back to China, the process will take forever and someone mentioned that bitmain couldn't send them their gears back and offered to buy their gears at a very cheap price, so sending them your gears back is a huge risk.

for the second worker, did you try a different PSU?
favebook
sr. member
Activity: 604
Merit: 416
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 21, 2020, 03:37:47 PM
#317
What helped me is to use other miner to heat up the one that I am about to boot. After booting it, I move away my "heater" and it doesn't overheat but at least it mines. I have this problem with both S17Pro and S17+.

When not heated S17Pro mines with only one or sometimes no hashboards at all, if I heat it up with my Z11, it mines with 2 or 3 hashboards normally. When not heated S17+ does not mine at all, if I heat it, it mines with one or sometimes two hashboards (third hashboard has loose heatsink so there is no way this method helps it Cheesy).
mtnrotary
newbie
Activity: 7
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 21, 2020, 01:23:36 PM
#316
Worker 3

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 13/4, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 347/120, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
macb e000b000.ethernet eth0: link down
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
2020-10-14 20:34:55 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2020-10-14 20:34:55 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version     = 1
2020-10-14 20:34:55 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab        = 1
2020-10-14 20:34:55 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-10-14 20:34:55 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun  2 10:31:07 CST 2020 type: Antminer S17+
2020-10-14 20:34:55 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2020-10-14 20:34:55 driver-btm-api.c:2083:show_sn: len:16, 8070642a18c0885c
2020-10-14 20:34:55 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2020-10-14 20:34:55 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2020-10-14 20:34:55 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8070642a18c0885c
2020-10-14 20:34:55 fan.c:284:front_fan_power_on: Note: front fan is power on!
2020-10-14 20:34:55 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2020-10-14 20:34:55 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2020-10-14 20:34:55 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-10-14 20:35:01 driver-btm-api.c:1239:init_miner_version: miner ID : 8070642a18c0885c
2020-10-14 20:35:01 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-10-14 20:35:06 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-10-14 20:35:06 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-10-14 20:35:06 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-10-14 20:35:06 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2020-10-14 20:35:06 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2020-10-14 20:35:06 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2020-10-14 20:35:06 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2020-10-14 20:35:06 thread.c:1363:create_read_nonce_reg_thread: create thread
2020-10-14 20:35:12 driver-btm-api.c:1239:init_miner_version: miner ID : 8070642a18c0885c
2020-10-14 20:35:12 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-10-14 20:35:18 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-10-14 20:35:18 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-10-14 20:35:18 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-10-14 20:35:18 driver-btm-api.c:792:_set_project_type: project:0
2020-10-14 20:35:18 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2020-10-14 20:35:18 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-10-14 20:35:18 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-10-14 20:35:18 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-10-14 20:35:18 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-10-14 20:35:18 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-10-14 20:35:18 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-10-14 20:35:18 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2020-10-14 20:35:19 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-10-14 20:35:21 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-10-14 20:35:22 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-10-14 20:35:24 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-10-14 20:35:25 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-10-14 20:35:27 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-10-14 20:35:27 thread.c:1358:create_pic_heart_beat_thread: create thread
2020-10-14 20:35:27 power_api.c:213:power_init: Power init:
2020-10-14 20:35:27 power_api.c:214:power_init: current_voltage_raw = 0
2020-10-14 20:35:27 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-10-14 20:35:27 power_api.c:216:power_init: working_voltage_raw = 1950
2020-10-14 20:35:27 power_api.c:217:power_init: higher_voltage_raw  = 2040
2020-10-14 20:35:27 power_api.c:218:power_init: check_asic_voltage_raw  = 2100
2020-10-14 20:35:27 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-10-14 20:35:27 power_api.c:186:power_off: init gpio907
2020-10-14 20:35:59 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-10-14 20:36:25 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:36:26 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.175572
2020-10-14 20:36:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.027955
2020-10-14 20:36:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.003812
2020-10-14 20:36:28 power_api.c:53:_get_avg_voltage: average_voltage = 21.069113
2020-10-14 20:36:28 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.07, check voltage passed.
2020-10-14 20:36:28 uart.c:72:set_baud: set fpga_baud to 115200
2020-10-14 20:36:39 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2020-10-14 20:36:50 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2020-10-14 20:37:01 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2020-10-14 20:37:01 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:37:09 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3
2020-10-14 20:37:09 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2050
2020-10-14 20:37:09 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2020-10-14 20:37:13 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:37:15 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.641678
2020-10-14 20:37:16 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.522900
2020-10-14 20:37:17 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.520966
2020-10-14 20:37:17 power_api.c:53:_get_avg_voltage: average_voltage = 20.561848
2020-10-14 20:37:17 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.56, check voltage passed.
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:37:26 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4
2020-10-14 20:37:26 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2020-10-14 20:37:26 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2020-10-14 20:37:29 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:37:30 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.134689
2020-10-14 20:37:31 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.039440
2020-10-14 20:37:32 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.038120
2020-10-14 20:37:32 power_api.c:53:_get_avg_voltage: average_voltage = 20.070750
2020-10-14 20:37:32 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.07, check voltage passed.
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:37:41 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5
2020-10-14 20:37:41 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2020-10-14 20:37:41 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-10-14 20:37:46 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:37:47 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.124524
2020-10-14 20:37:48 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.030534
2020-10-14 20:37:50 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.003812
2020-10-14 20:37:50 power_api.c:53:_get_avg_voltage: average_voltage = 21.052957
2020-10-14 20:37:50 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.05, check voltage passed.
2020-10-14 20:37:50 driver-btm-api.c:1193:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2020-10-14 20:37:51 driver-btm-api.c:1195:check_asic_number: Chain 0 voltage: an0 = 2.825806, an2 2.822581, an6 2.538710.
2020-10-14 20:38:02 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-10-14 20:38:13 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2020-10-14 20:38:24 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2020-10-14 20:38:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:38:33 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
2020-10-14 20:38:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2050
2020-10-14 20:38:33 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2020-10-14 20:38:36 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:38:37 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.520966
2020-10-14 20:38:38 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.520966
2020-10-14 20:38:38 power_api.c:53:_get_avg_voltage: average_voltage = 20.520966
2020-10-14 20:38:38 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.52, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:38:47 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
2020-10-14 20:38:47 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2020-10-14 20:38:47 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2020-10-14 20:38:50 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:38:51 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.013978
2020-10-14 20:38:52 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.013978
2020-10-14 20:38:52 power_api.c:53:_get_avg_voltage: average_voltage = 20.013978
2020-10-14 20:38:52 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.01, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:39:01 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
2020-10-14 20:39:01 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2020-10-14 20:39:01 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-10-14 20:39:06 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:39:07 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.003812
2020-10-14 20:39:08 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.003812
2020-10-14 20:39:08 power_api.c:53:_get_avg_voltage: average_voltage = 21.003812
2020-10-14 20:39:08 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.00, check voltage passed.
2020-10-14 20:39:08 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2020-10-14 20:39:09 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.812903, an2 2.806452, an6 2.535484.
2020-10-14 20:39:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2020-10-14 20:39:32 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 8 asic, times 1
2020-10-14 20:39:43 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2020-10-14 20:39:43 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:39:51 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
2020-10-14 20:39:51 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2050
2020-10-14 20:39:51 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2020-10-14 20:39:55 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:39:56 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.494923
2020-10-14 20:39:56 power_api.c:53:_get_avg_voltage: average_voltage = 20.494923
2020-10-14 20:39:56 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.49, check voltage passed.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:40:05 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4
2020-10-14 20:40:05 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2020-10-14 20:40:05 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2020-10-14 20:40:08 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:40:10 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.012689
2020-10-14 20:40:10 power_api.c:53:_get_avg_voltage: average_voltage = 20.012689
2020-10-14 20:40:10 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.01, check voltage passed.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-10-14 20:40:18 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5
2020-10-14 20:40:18 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2020-10-14 20:40:18 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-10-14 20:40:23 power_api.c:85:check_voltage_multi: retry time: 0
2020-10-14 20:40:25 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.977156
2020-10-14 20:40:25 power_api.c:53:_get_avg_voltage: average_voltage = 20.977156
2020-10-14 20:40:25 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.98, check voltage passed.
2020-10-14 20:40:25 driver-btm-api.c:1193:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2020-10-14 20:40:26 driver-btm-api.c:1195:check_asic_number: Chain 2 voltage: an0 = 2.819355, an2 2.806452, an6 2.541935.
2020-10-14 20:40:27 driver-btm-api.c:222:set_miner_status: ERROR_SOC_INIT
2020-10-14 20:40:27 driver-btm-api.c:156:stop_mining: stop mining: soc init failed!
2020-10-14 20:40:27 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
2020-10-14 20:40:27 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
mtnrotary
newbie
Activity: 7
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 21, 2020, 01:15:53 PM
#315
They're not hashing at all, or just very low hash. At this point Bitmain have said to ship all three back to them Sad. Any tips would be greatly appreciated!

Worker 1

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203544K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25832K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12792K (cce82000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 6/1, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 404/140, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-10-15 11:30:38 driver-btm-api.c:632:init_freq_mode: This is scan-user version
2020-10-15 11:30:38 driver-btm-api.c:1815:bitmain_soc_init: opt_multi_version     = 1
2020-10-15 11:30:38 driver-btm-api.c:1816:bitmain_soc_init: opt_bitmain_ab        = 1
2020-10-15 11:30:38 driver-btm-api.c:1817:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-10-15 11:30:38 driver-btm-api.c:1818:bitmain_soc_init: Miner compile time: Fri Dec  6 13:23:09 CST 2019 type: Antminer S17+
2020-10-15 11:30:38 driver-btm-api.c:1819:bitmain_soc_init: commit version: c767010 2019-12-04 14:22:30, build by: lol 2019-12-06 13:31:56
2020-10-15 11:30:38 driver-btm-api.c:1655:show_sn: no SN got, please write SN to /nvdata/sn
2020-10-15 11:30:38 fan.c:236:front_fan_power_on: Note: front fan is power on!
2020-10-15 11:30:38 fan.c:248:rear_fan_power_on: Note: rear fan is power on!
2020-10-15 11:30:38 driver-btm-api.c:1110:miner_device_init: Detect 256MB control board of XILINX
2020-10-15 11:30:38 driver-btm-api.c:1058:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-10-15 11:30:38 thread.c:731:create_read_nonce_reg_thread: create thread
2020-10-15 11:30:44 driver-btm-api.c:1042:init_miner_version: miner ID : 8168242429e04814
2020-10-15 11:30:44 driver-btm-api.c:1048:init_miner_version: FPGA Version = 0xB023
2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[0] = 0
2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[1] = 0
2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[2] = 0
2020-10-15 11:30:49 driver-btm-api.c:645:_set_project_type: project:0
2020-10-15 11:30:49 driver-btm-api.c:665:_set_project_type: Project type: Antminer S17+
2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-10-15 11:30:53 driver-btm-api.c:1764:bitmain_board_init: Fan check passed.
2020-10-15 11:30:54 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-10-15 11:30:56 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-10-15 11:30:57 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-10-15 11:31:00 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-10-15 11:31:01 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-10-15 11:31:03 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-10-15 11:31:03 thread.c:726:create_pic_heart_beat_thread: create thread
2020-10-15 11:31:03 power_api.c:208:power_init: Power init:
2020-10-15 11:31:03 power_api.c:209:power_init: current_voltage_raw = 0
2020-10-15 11:31:03 power_api.c:210:power_init: highest_voltage_raw = 2100
2020-10-15 11:31:03 power_api.c:211:power_init: working_voltage_raw = 1950
2020-10-15 11:31:03 power_api.c:212:power_init: higher_voltage_raw  = 2040
2020-10-15 11:31:03 driver-btm-api.c:1774:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-10-15 11:31:03 power_api.c:182:power_off: init gpio907
2020-10-15 11:31:35 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step.
2020-10-15 11:31:37 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:31:38 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.016624
2020-10-15 11:31:39 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.040921
2020-10-15 11:31:40 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.089514
2020-10-15 11:31:40 power_api.c:51:_get_avg_voltage: average_voltage = 21.049020
2020-10-15 11:31:40 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.05, check voltage passed.
2020-10-15 11:31:40 uart.c:71:set_baud: set fpga_baud to 115200
2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2020-10-15 11:31:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-10-15 11:32:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-10-15 11:32:13 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2020-10-15 11:32:23 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2020-10-15 11:32:23 driver-btm-api.c:1010:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2020-10-15 11:32:25 driver-btm-api.c:1012:check_asic_number: Chain 1 voltage: an0 = 2.783871, an2 2.790323, an6 2.522581.
2020-10-15 11:32:37 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-10-15 11:32:43 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-10-15 11:32:43 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3
2020-10-15 11:32:43 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3
2020-10-15 11:32:43 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-10-15 11:32:43 voltage[0] = 1940
2020-10-15 11:32:43 voltage[2] = 1940
2020-10-15 11:32:43 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1940
2020-10-15 11:32:44 temperature.c:314:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-10-15 11:32:45 temperature.c:314:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-10-15 11:32:45 uart.c:71:set_baud: set fpga_baud to 12000000
2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3
2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 12000000, chip_divider = 3
2020-10-15 11:32:46 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 15
2020-10-15 11:32:46 thread.c:746:create_check_miner_status_thread: create thread
2020-10-15 11:32:46 thread.c:736:create_show_miner_status_thread: create thread
2020-10-15 11:32:46 thread.c:721:create_temperature_monitor_thread: create thread
2020-10-15 11:32:46 freq_tuning.c:145:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-10-15 11:32:46 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
2020-10-15 11:32:55 frequency.c:811:inc_freq_with_fixed_step: chain = 0, freq_start = 540, freq_end = 590, freq_step = 5, is_higher_voltage = true
2020-10-15 11:32:57 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-10-15 11:32:58 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:32:59 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.822251
2020-10-15 11:33:00 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.892719
2020-10-15 11:33:00 power_api.c:51:_get_avg_voltage: average_voltage = 20.857485
2020-10-15 11:33:00 power_api.c:69:check_voltage: target_vol = 20.90, actural_vol = 20.86, check voltage passed.
2020-10-15 11:33:04 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2070, step by step.
2020-10-15 11:33:06 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:33:07 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.627877
2020-10-15 11:33:08 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.725064
2020-10-15 11:33:08 power_api.c:51:_get_avg_voltage: average_voltage = 20.676471
2020-10-15 11:33:08 power_api.c:69:check_voltage: target_vol = 20.70, actural_vol = 20.68, check voltage passed.
2020-10-15 11:33:08 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 0, start = 590, freq_step = 5
2020-10-15 11:33:13 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 2, start = 540, freq_step = 5
2020-10-15 11:33:16 driver-btm-api.c:618:set_timeout: freq = 620, percent = 90, hcn = 44236, timeout = 71
2020-10-15 11:33:16 power_api.c:226:set_higher_voltage_raw: higher_voltage_raw = 2040
2020-10-15 11:33:16 power_api.c:332:set_to_higher_voltage_by_steps: Set to voltage raw 2040, step by step.
2020-10-15 11:33:18 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:33:19 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.336317
2020-10-15 11:33:20 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.433504
2020-10-15 11:33:20 power_api.c:51:_get_avg_voltage: average_voltage = 20.384910
2020-10-15 11:33:20 power_api.c:69:check_voltage: target_vol = 20.40, actural_vol = 20.38, check voltage passed.
2020-10-15 11:33:20 thread.c:741:create_check_system_status_thread: create thread
2020-10-15 11:33:21 driver-btm-api.c:1919:bitmain_soc_init: Init done!
2020-10-15 11:33:21 driver-btm-api.c:194:set_miner_status: STATUS_INIT
2020-10-15 11:33:25 driver-btm-api.c:194:set_miner_status: STATUS_OKAY
2020-10-15 11:33:26 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 49572
2020-10-15 11:33:26 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 49000
2020-10-15 11:33:29 driver-btm-api.c:1292:dhash_chip_send_job: Version num 4
2020-10-15 11:33:38 thread.c:390:check_working_voltage: current PCB min temperature is 28
2020-10-15 11:33:38 thread.c:391:check_working_voltage: current voltage is 2040, recovery to 1940
2020-10-15 11:33:38 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step.
2020-10-15 11:33:43 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:33:45 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.364450
2020-10-15 11:33:46 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 19.436780
2020-10-15 11:33:46 power_api.c:51:_get_avg_voltage: average_voltage = 19.400615
2020-10-15 11:33:46 power_api.c:69:check_voltage: target_vol = 19.40, actural_vol = 19.40, check voltage passed.
2020-10-15 12:03:46 thread.c:214:calc_hashrate_avg: avg rate is 50463.77 in 30 mins
2020-10-15 12:03:46 temperature.c:482:temp_statistics_show:   pcb temp 33~64  chip temp 53~81
2020-10-15 12:33:48 thread.c:214:calc_hashrate_avg: avg rate is 50487.23 in 30 mins
2020-10-15 12:33:48 temperature.c:482:temp_statistics_show:   pcb temp 35~64  chip temp 54~82
2020-10-15 13:03:49 thread.c:214:calc_hashrate_avg: avg rate is 50529.31 in 30 mins
2020-10-15 13:03:49 temperature.c:482:temp_statistics_show:   pcb temp 34~62  chip temp 54~79
2020-10-15 13:33:51 thread.c:214:calc_hashrate_avg: avg rate is 50277.34 in 30 mins
2020-10-15 13:33:51 temperature.c:482:temp_statistics_show:   pcb temp 34~63  chip temp 54~80

Worker 2

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203544K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25832K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12792K (cce82000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 430/137, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-10-15 11:30:38 driver-btm-api.c:632:init_freq_mode: This is scan-user version
2020-10-15 11:30:38 driver-btm-api.c:1815:bitmain_soc_init: opt_multi_version     = 1
2020-10-15 11:30:38 driver-btm-api.c:1816:bitmain_soc_init: opt_bitmain_ab        = 1
2020-10-15 11:30:38 driver-btm-api.c:1817:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-10-15 11:30:38 driver-btm-api.c:1818:bitmain_soc_init: Miner compile time: Fri Dec  6 13:23:09 CST 2019 type: Antminer S17+
2020-10-15 11:30:38 driver-btm-api.c:1819:bitmain_soc_init: commit version: c767010 2019-12-04 14:22:30, build by: lol 2019-12-06 13:31:56
2020-10-15 11:30:38 driver-btm-api.c:1655:show_sn: no SN got, please write SN to /nvdata/sn
2020-10-15 11:30:38 fan.c:236:front_fan_power_on: Note: front fan is power on!
2020-10-15 11:30:38 fan.c:248:rear_fan_power_on: Note: rear fan is power on!
2020-10-15 11:30:38 driver-btm-api.c:1110:miner_device_init: Detect 256MB control board of XILINX
2020-10-15 11:30:38 driver-btm-api.c:1058:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-10-15 11:30:38 thread.c:731:create_read_nonce_reg_thread: create thread
2020-10-15 11:30:44 driver-btm-api.c:1042:init_miner_version: miner ID : 803c442429e0481c
2020-10-15 11:30:44 driver-btm-api.c:1048:init_miner_version: FPGA Version = 0xB023
2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[0] = 0
2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[1] = 0
2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[2] = 0
2020-10-15 11:30:49 driver-btm-api.c:645:_set_project_type: project:0
2020-10-15 11:30:49 driver-btm-api.c:665:_set_project_type: Project type: Antminer S17+
2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-10-15 11:30:53 driver-btm-api.c:1764:bitmain_board_init: Fan check passed.
2020-10-15 11:30:54 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-10-15 11:30:56 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-10-15 11:30:57 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-10-15 11:31:00 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-10-15 11:31:01 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-10-15 11:31:03 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-10-15 11:31:03 thread.c:726:create_pic_heart_beat_thread: create thread
2020-10-15 11:31:03 power_api.c:208:power_init: Power init:
2020-10-15 11:31:03 power_api.c:209:power_init: current_voltage_raw = 0
2020-10-15 11:31:03 power_api.c:210:power_init: highest_voltage_raw = 2100
2020-10-15 11:31:03 power_api.c:211:power_init: working_voltage_raw = 1950
2020-10-15 11:31:03 power_api.c:212:power_init: higher_voltage_raw  = 2040
2020-10-15 11:31:03 driver-btm-api.c:1774:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-10-15 11:31:03 power_api.c:182:power_off: init gpio907
2020-10-15 11:31:35 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step.
2020-10-15 11:31:37 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:31:38 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.119138
2020-10-15 11:31:39 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.135375
2020-10-15 11:31:40 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.081529
2020-10-15 11:31:40 power_api.c:51:_get_avg_voltage: average_voltage = 21.112014
2020-10-15 11:31:40 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.11, check voltage passed.
2020-10-15 11:31:40 uart.c:71:set_baud: set fpga_baud to 115200
2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2020-10-15 11:31:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-10-15 11:32:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2020-10-15 11:32:13 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2020-10-15 11:32:24 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2020-10-15 11:32:34 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2020-10-15 11:32:34 driver-btm-api.c:1010:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2020-10-15 11:32:35 driver-btm-api.c:1012:check_asic_number: Chain 2 voltage: an0 = 2.793548, an2 2.803226, an6 2.535484.
2020-10-15 11:32:42 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-10-15 11:32:42 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3
2020-10-15 11:32:42 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3
2020-10-15 11:32:42 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-10-15 11:32:42 voltage[0] = 1940
2020-10-15 11:32:42 voltage[1] = 1940
2020-10-15 11:32:42 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1940
2020-10-15 11:32:43 temperature.c:314:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-10-15 11:32:45 temperature.c:314:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2020-10-15 11:32:45 uart.c:71:set_baud: set fpga_baud to 12000000
2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3
2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 12000000, chip_divider = 3
2020-10-15 11:32:46 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 16
2020-10-15 11:32:46 thread.c:746:create_check_miner_status_thread: create thread
2020-10-15 11:32:46 thread.c:736:create_show_miner_status_thread: create thread
2020-10-15 11:32:46 thread.c:721:create_temperature_monitor_thread: create thread
2020-10-15 11:32:46 freq_tuning.c:145:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-10-15 11:32:46 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 560, is_higher_voltage = true
2020-10-15 11:32:54 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-10-15 11:32:56 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:32:57 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.924049
2020-10-15 11:32:58 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.963010
2020-10-15 11:32:58 power_api.c:51:_get_avg_voltage: average_voltage = 20.943530
2020-10-15 11:32:58 power_api.c:69:check_voltage: target_vol = 20.90, actural_vol = 20.94, check voltage passed.
2020-10-15 11:32:59 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2070, step by step.
2020-10-15 11:33:00 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:33:01 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.731644
2020-10-15 11:33:02 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.769132
2020-10-15 11:33:02 power_api.c:51:_get_avg_voltage: average_voltage = 20.750388
2020-10-15 11:33:02 power_api.c:69:check_voltage: target_vol = 20.70, actural_vol = 20.75, check voltage passed.
2020-10-15 11:33:02 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 0, start = 560, freq_step = 5
2020-10-15 11:33:09 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 1, start = 560, freq_step = 5
2020-10-15 11:33:13 driver-btm-api.c:618:set_timeout: freq = 610, percent = 90, hcn = 44236, timeout = 72
2020-10-15 11:33:13 power_api.c:226:set_higher_voltage_raw: higher_voltage_raw = 2040
2020-10-15 11:33:13 power_api.c:332:set_to_higher_voltage_by_steps: Set to voltage raw 2040, step by step.
2020-10-15 11:33:15 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:33:17 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.443037
2020-10-15 11:33:18 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.454081
2020-10-15 11:33:18 power_api.c:51:_get_avg_voltage: average_voltage = 20.448559
2020-10-15 11:33:18 power_api.c:69:check_voltage: target_vol = 20.40, actural_vol = 20.45, check voltage passed.
2020-10-15 11:33:18 thread.c:741:create_check_system_status_thread: create thread
2020-10-15 11:33:18 driver-btm-api.c:1919:bitmain_soc_init: Init done!
2020-10-15 11:33:18 driver-btm-api.c:194:set_miner_status: STATUS_INIT
2020-10-15 11:33:23 driver-btm-api.c:194:set_miner_status: STATUS_OKAY
2020-10-15 11:33:24 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 49572
2020-10-15 11:33:24 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 49000
2020-10-15 11:33:29 driver-btm-api.c:1292:dhash_chip_send_job: Version num 4
2020-10-15 11:33:33 thread.c:390:check_working_voltage: current PCB min temperature is 30
2020-10-15 11:33:33 thread.c:391:check_working_voltage: current voltage is 2040, recovery to 1940
2020-10-15 11:33:33 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step.
2020-10-15 11:33:38 power_api.c:83:check_voltage_multi: retry time: 0
2020-10-15 11:33:39 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.481012
2020-10-15 11:33:40 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 19.484694
2020-10-15 11:33:40 power_api.c:51:_get_avg_voltage: average_voltage = 19.482853
2020-10-15 11:33:40 power_api.c:69:check_voltage: target_vol = 19.40, actural_vol = 19.48, check voltage passed.
2020-10-15 12:03:40 thread.c:214:calc_hashrate_avg: avg rate is 50388.11 in 30 mins
2020-10-15 12:03:40 temperature.c:482:temp_statistics_show:   pcb temp 33~64  chip temp 53~79
2020-10-15 12:33:42 thread.c:214:calc_hashrate_avg: avg rate is 50508.59 in 30 mins
2020-10-15 12:33:42 temperature.c:482:temp_statistics_show:   pcb temp 36~64  chip temp 56~80
2020-10-15 13:03:43 thread.c:214:calc_hashrate_avg: avg rate is 50827.84 in 30 mins
2020-10-15 13:03:43 temperature.c:482:temp_statistics_show:   pcb temp 35~64  chip temp 56~79
2020-10-15 13:33:44 thread.c:214:calc_hashrate_avg: avg rate is 50653.24 in 30 mins
2020-10-15 13:33:44 temperature.c:482:temp_statistics_show:   pcb temp 36~65  chip temp 57~81

Continued in next post.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 21, 2020, 12:03:05 AM
#314
There is no firmware on those hash boards, it's just the hex file difference, most miners will show some sort of id type for each hashboard, those need to be identical, these info can be found either on the hash board itself or the kernel log, you should look for things like typeID, major type or minor type, product id or any other info that shows at the top of the kernel log which specifies a certain value for each of the hash boards you have installed.

here is an example of mixed boards on an S9:

Code:
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] chip[244] get middle temp offset=27 typeID=55

Chain 7 has a different type id but the miner works just fine because well, it's an S9 after all  Grin.

Here is another example of an S9k:

Code:
read chain[0] hardware info:
major type: 0
minor type: 2
chip level: 0
bom version: 0x10
pcb version: 0x39


read chain[2] hardware info:
major type: 0
minor type: 2
chip level: 0
bom version: 0x10
pcb version: 0x39

There is no exact word/value to look for, but it's pretty self-explanatory.
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 20, 2020, 09:26:25 AM
#313
Quote from: Costar79 on December 20, 2020, 12:18:01 AM
2020-12-20 03:49:15 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 0
2020-12-20 03:49:26 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 1
2020-12-20 03:49:37 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 2
2020-12-20 03:49:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100

[...]

2020-12-20 03:55:20 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:21 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-12-20 03:55:22 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:23 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-12-20 03:55:24 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:25 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times.
2020-12-20 03:55:26 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 150, reg = 28, got chain = 0, chip = 0, reg = 1
2020-12-20 03:55:27 register.c:313:get_register: !!! REG_TYPE = 1. 704673792
2020-12-20 03:55:27 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times.
2020-12-20 03:55:28 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 56, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxox xxxxx
2020-12-20 03:55:29 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times.
2020-12-20 03:55:29 thread.c:1297:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times, power off.
2020-12-20 03:55:30 temperature.c:843:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1

Looks like chain 1 is not able to get status back from chip 51 - 65, which could there is an issue with asic chip 50 or 51, or an issue with the voltage regulation for 51 - 55. Could be bad solder joints, excess solder from the heatsink shorting signals out, or just a bad chip. Essentially the same for chain 0, but it manages to get the status back initially but then fails once the board starts hashing. That can happen because solder connections break or short when the board heats up or the voltage regulation dies once the board starts drawing more current.

I don't think you can hurt anything by swapping hashboards around, although some 17 series hashboards don't mix with others, so it may not work. My understanding is that the control board needs all the hashboards to be running the same firmware.

Did these machines arrive like this? If so, is coinminingcentral not being helpful?

If you've read through this thread then you know sending a miner to Bitmain for repair is not a good idea, so definitely try to find a 3rd party to repair them. If you send it to Bitmain you might never see it again.

So in my opinion, best option is to get coinminingcentral to make good in some way, second best option is to find a repair shop.
Costar79
newbie
Activity: 2
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 20, 2020, 12:18:01 AM
#312
Hi all,

I bought two second hand s17+ from coinminingcentral of the 140 Th i was hoping to get out of these two machines i am only getting 50 to 80. All kinds of problems, the common ones, temp sensors hash boards going off line all that jazz.

The first machine, the better one starts up at with all three chains running and the after a couple of hours gets a temp sensor error and then shuts that board off. 70Th down to 50Th then seems to stay like that until i reboot the machine and then the board starts up again back to 70Th YAAAY for a couple of hours again and boops back offline!

The second machine seems to have only one board that functions correctly, ill leave the log here so someone can make sense of whats happening.

Code:
2020-12-20 03:47:35 driver-btm-api.c:1239:init_miner_version: miner ID : 80781c864e10481c
2020-12-20 03:47:35 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-12-20 03:47:40 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-12-20 03:47:40 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-12-20 03:47:40 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-12-20 03:47:40 driver-btm-api.c:792:_set_project_type: project:0
2020-12-20 03:47:40 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2020-12-20 03:47:40 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-12-20 03:47:40 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-12-20 03:47:40 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-12-20 03:47:40 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-12-20 03:47:40 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-12-20 03:47:40 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-12-20 03:47:42 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2020-12-20 03:47:43 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-12-20 03:47:46 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-12-20 03:47:47 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-12-20 03:47:49 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-12-20 03:47:50 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-12-20 03:47:52 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-12-20 03:47:52 thread.c:1358:create_pic_heart_beat_thread: create thread
2020-12-20 03:47:52 power_api.c:213:power_init: Power init:
2020-12-20 03:47:52 power_api.c:214:power_init: current_voltage_raw = 0
2020-12-20 03:47:52 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-12-20 03:47:52 power_api.c:216:power_init: working_voltage_raw = 1950
2020-12-20 03:47:52 power_api.c:217:power_init: higher_voltage_raw  = 2040
2020-12-20 03:47:52 power_api.c:218:power_init: check_asic_voltage_raw  = 2100
2020-12-20 03:47:52 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-12-20 03:47:52 power_api.c:186:power_off: init gpio907
2020-12-20 03:48:24 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-12-20 03:48:50 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:48:51 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.970549
2020-12-20 03:48:52 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.924359
2020-12-20 03:48:53 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.897566
2020-12-20 03:48:53 power_api.c:53:_get_avg_voltage: average_voltage = 20.930825
2020-12-20 03:48:53 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.93, check voltage passed.
2020-12-20 03:48:53 uart.c:72:set_baud: set fpga_baud to 115200
2020-12-20 03:49:04 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-12-20 03:49:15 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 0
2020-12-20 03:49:26 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 1
2020-12-20 03:49:37 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 2
2020-12-20 03:49:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-20 03:49:46 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 3
2020-12-20 03:49:46 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2050
2020-12-20 03:49:46 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2020-12-20 03:49:49 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:49:52 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.433504
2020-12-20 03:49:53 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.411010
2020-12-20 03:49:54 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.386683
2020-12-20 03:49:54 power_api.c:53:_get_avg_voltage: average_voltage = 20.410399
2020-12-20 03:49:54 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.41, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-20 03:50:03 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 4
2020-12-20 03:50:03 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2020-12-20 03:50:03 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2020-12-20 03:50:06 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:50:08 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.947570
2020-12-20 03:50:09 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.924455
2020-12-20 03:50:10 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.900127
2020-12-20 03:50:10 power_api.c:53:_get_avg_voltage: average_voltage = 19.924051
2020-12-20 03:50:10 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.92, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-20 03:50:19 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 5
2020-12-20 03:50:19 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2020-12-20 03:50:19 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-12-20 03:50:24 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:50:26 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.892719
2020-12-20 03:50:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.897566
2020-12-20 03:50:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.873238
2020-12-20 03:50:28 power_api.c:53:_get_avg_voltage: average_voltage = 20.887841
2020-12-20 03:50:28 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.89, check voltage passed.
2020-12-20 03:50:28 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 50 asic, will power off hash board 1
2020-12-20 03:50:29 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.770968, an2 2.770968, an6 2.519355.
2020-12-20 03:50:41 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-12-20 03:50:46 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-12-20 03:50:46 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2020-12-20 03:50:47 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
2020-12-20 03:50:47 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-12-20 03:50:47 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2020-12-20 03:50:47 voltage[0] = 1960
2020-12-20 03:50:47 voltage[2] = 1960
2020-12-20 03:50:47 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
2020-12-20 03:50:49 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-12-20 03:50:50 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-12-20 03:50:50 uart.c:72:set_baud: set fpga_baud to 12000000
2020-12-20 03:50:51 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 23
2020-12-20 03:50:51 thread.c:1378:create_check_miner_status_thread: create thread
2020-12-20 03:50:51 thread.c:1368:create_show_miner_status_thread: create thread
2020-12-20 03:50:51 thread.c:1348:create_temperature_monitor_thread: create thread
2020-12-20 03:50:51 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 23 dec_freq_index=0
2020-12-20 03:50:51 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-12-20 03:50:51 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2020-12-20 03:50:51 thread.c:1338:create_asic_status_monitor_thread: create thread
2020-12-20 03:50:51 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 515, is_higher_voltage = true
2020-12-20 03:51:41 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-12-20 03:51:43 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:51:45 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.797954
2020-12-20 03:51:46 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.700767
2020-12-20 03:51:46 power_api.c:53:_get_avg_voltage: average_voltage = 20.749361
2020-12-20 03:51:46 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.75, check voltage passed.
2020-12-20 03:55:20 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:21 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-12-20 03:55:22 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:23 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-12-20 03:55:24 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:25 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times.
2020-12-20 03:55:26 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx
2020-12-20 03:55:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 150, reg = 28, got chain = 0, chip = 0, reg = 1
2020-12-20 03:55:27 register.c:313:get_register: !!! REG_TYPE = 1. 704673792
2020-12-20 03:55:27 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times.
2020-12-20 03:55:28 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 56, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxox xxxxx
2020-12-20 03:55:29 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times.
2020-12-20 03:55:29 thread.c:1297:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times, power off.
2020-12-20 03:55:30 temperature.c:843:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-12-20 03:56:02 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2060, step by step.
2020-12-20 03:56:04 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:56:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.384910
2020-12-20 03:56:05 power_api.c:53:_get_avg_voltage: average_voltage = 20.384910
2020-12-20 03:56:05 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.38, check voltage passed.
2020-12-20 03:56:05 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 2, start = 515, freq_step = 5
2020-12-20 03:56:09 driver-btm-api.c:765:set_timeout: freq = 545, percent = 90, hcn = 44236, timeout = 81
2020-12-20 03:56:09 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step.
2020-12-20 03:56:14 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-20 03:56:15 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.413043
2020-12-20 03:56:15 power_api.c:53:_get_avg_voltage: average_voltage = 19.413043
2020-12-20 03:56:15 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.41, check voltage passed.
2020-12-20 03:56:15 thread.c:1373:create_check_system_status_thread: create thread
2020-12-20 03:56:16 driver-btm-api.c:2618:bitmain_soc_init: Init done!
2020-12-20 03:56:16 driver-btm-api.c:222:set_miner_status: STATUS_INIT
2020-12-20 03:56:20 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
2020-12-20 03:56:21 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 22699
2020-12-20 03:56:21 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 22000
2020-12-20 03:56:26 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4.
2020-12-20 03:56:26 driver-btm-api.c:1644:dhash_chip_send_job: stime.tv_sec 1608436586, block_ntime 1608436571

Can someone pls pls advise me of what my next steps should be here. Here are the kernel versions for both machines:


Kernel Version   Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
File System Version   Tue Jun 2 10:31:07 CST 2020


I am thinking of replacing the board with the temp sensor error on the first machine with the board from the second machine that seems to be working and then maybe sending a full machine away for repairs.

Any suggestions?
Moeter81
member
Activity: 62
Merit: 29
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 14, 2020, 12:47:12 AM
#311
https://bitcointalksearch.org/topic/minerseu-scam-website-review-5279533

here, I have completed my report about Miners.eu.
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 12, 2020, 04:26:26 PM
#310
A good start would be to post the kernel logs.

Are they not hashing at all, or hashing and then shutting down after a period of time?
mtnrotary
newbie
Activity: 7
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 12, 2020, 03:52:26 PM
#309
Hi all, I've read through some of this thread and am amazed to see the number of errors people have had with their s17's.

I'm in a similar boat however not so familiar so was after some help in trying to determine what to do next. Long story short, 3 of my miners are hosted in Canada. The mining company elected to transfer the miners across the country and within days of arriving at the new site all three died.

I have access to the serial numbers and kernal logs but trying to figure out what to post to help determine the issue? The problem is complicated by the fact the mining company is being rather unhelpful, and I'm on the other side of the world to Canada.

Anyway, any assistance would be greatly appreciated Smiley
Moeter81
member
Activity: 62
Merit: 29
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 09, 2020, 12:53:12 AM
#308
I phoned Dominic Alders (Miners.eu) 2 weeks ago. I asked him which miners he could deliver from the warehouse immediately. His answer was that you don't have any miners in stock. (according to the website, some devices are shown as available). All miners, but could be delivered between 7-14 days.

My order was executed and paid for on November 17th, 2020. Unfortunately I haven't received a miner yet and communication is difficult. I hope it will turn out well, I will report.
favebook
sr. member
Activity: 604
Merit: 416
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
December 08, 2020, 09:30:53 PM
#307
Quote from: mikxxy on December 08, 2020, 05:18:02 PM
Is asicminervalue.com to be a trusted  as non afiliated party? They have markings "trusted" on some vendors (obviously  based on some simple algortim, but still they are risking to discredit thier trademark if they are deviating with their "Trusted" marks to much.
Just my 2 cents

Read FAQ from time to time. It might be fruitful for you:

Quote from: https://www.asicminervalue.com/faq
All vendor listed are legit?
We try to check vendors to provide the safest links possible, but we cannot guarantee any of them.

You must be aware that all external links are out of our control, and one store may be safe for some users and give one bad experience to another.

All labels and risk estimates are given "as is" based on our experience and feedback from the community.
Pages:
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: