4x ASUS R9 280x DC2 TOP
Topic: The big VTC Vertcoin settings thread - page 35. (Read 264260 times)
4x ASUS R9 280x DC2 TOP
Can anyone comment on roughly how many coins they are mining per day? My 280x is doing 266Kh/s, and I've mined about 1 coin in 8 hours.
Strange thing is that my GPU seems to be doing less work. The room the machine is in is much colder than normal, and I see a lot of "requested work restart" in the console. If this is normal, then good, just curious what numbers others are seeing.
P.S. For anyone with a 280x that can't get -i 13 working without hardware errors, there was a comment here that mentions try restarting your computer. That fixed is for me :/.
Strange thing is that my GPU seems to be doing less work. The room the machine is in is much colder than normal, and I see a lot of "requested work restart" in the console. If this is normal, then good, just curious what numbers others are seeing.
P.S. For anyone with a 280x that can't get -i 13 working without hardware errors, there was a comment here that mentions try restarting your computer. That fixed is for me :/.
Off topic buy anyone else's deposits to cryptsy Vert not showing up? For me its been over 12 hours.
ya my 3k is still missing also.... 15 hours now Hi,
I am running Vertminer 0.5.3 on Xubuntu 12.04. So far no problems. Only one thing that bothers me is that Vertminer is not showing overview of hashrate, fan speed, temperatures, etc. as usual but I get screen of "running" text where actual hashrate is sometimes shown at the very bottom.
http://s15.postimg.org/7zfhl1rrf/vertminer.gif
Do you have any idea what is wrong? Thanks for help.
I am running Vertminer 0.5.3 on Xubuntu 12.04. So far no problems. Only one thing that bothers me is that Vertminer is not showing overview of hashrate, fan speed, temperatures, etc. as usual but I get screen of "running" text where actual hashrate is sometimes shown at the very bottom.
http://s15.postimg.org/7zfhl1rrf/vertminer.gif
Do you have any idea what is wrong? Thanks for help.
Do you have libncurses5-dev installed?
Hi,
I am running Vertminer 0.5.3 on Xubuntu 12.04. So far no problems. Only one thing that bothers me is that Vertminer is not showing overview of hashrate, fan speed, temperatures, etc. as usual but I get screen of "running" text where actual hashrate is sometimes shown at the very bottom.
http://s15.postimg.org/7zfhl1rrf/vertminer.gif
Do you have any idea what is wrong? Thanks for help.
I am running Vertminer 0.5.3 on Xubuntu 12.04. So far no problems. Only one thing that bothers me is that Vertminer is not showing overview of hashrate, fan speed, temperatures, etc. as usual but I get screen of "running" text where actual hashrate is sometimes shown at the very bottom.
http://s15.postimg.org/7zfhl1rrf/vertminer.gif
Do you have any idea what is wrong? Thanks for help.
So i bought an extra set of 4gb ram, and cranked up my r9 290 from 230 kh/s to 440 kh/s 
Samsung and Hynix and Elpida benefit from VERTCOINS. Their shares will jump like BITCOIN 10 fold.
Nice! I'm thinking on investing some more ram for the future..
So i bought an extra set of 4gb ram, and cranked up my r9 290 from 230 kh/s to 440 kh/s
Off topic buy anyone else's deposits to cryptsy Vert not showing up? For me its been over 12 hours.
Yes, the same issue!
UPDATE: Just received them all.
I've got a 6x R9 280x BAMT distro mining currently... What steps do I have to take to get it to mine Vertcoins? Is it even doable on BAMT? Or any Linux distro out there? (Windows won't recognise 6 GPU's)
Off topic but anyone else's deposits to cryptsy Vert not showing up? For me its been over 12 hours.
Here're my 4x ASUS 280X (top version):
GPU 1: 64.0C 2962RPM | 362.4K/364.9Kh/s | A:461 R: 0 HW:0 WU: 246.5/m I:13
GPU 2: 73.0C 3057RPM | 365.2K/365.0Kh/s | A:601 R:15 HW:0 WU: 300.4/m I:13
GPU 3: 64.0C 3085RPM | 365.3K/365.2Kh/s | A:895 R:53 HW:0 WU: 434.8/m I:13
GPU 4: 63.0C 2998RPM | 365.2K/363.9Kh/s | A:454 R:34 HW:0 WU: 250.9/m I:13
--------------------------------------------------------------------------------
280.sh file:
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
./vertminer -o -u -p -d 1,2,3,4 -I 13 --worksize 256 --gpu-threads 2 --thread-concurrency 8191 --gpu-engine 1020 --gpu-mem
clock 1600 --gpu-fan 40-80 --temp-overheat 80 --temp-cutoff 85 --lookup-gap 0
So far works great;
Vsm7CxTXBaB386LT6WnarftPKjm5wGYvpS
tips welcome :-p
GPU 1: 64.0C 2962RPM | 362.4K/364.9Kh/s | A:461 R: 0 HW:0 WU: 246.5/m I:13
GPU 2: 73.0C 3057RPM | 365.2K/365.0Kh/s | A:601 R:15 HW:0 WU: 300.4/m I:13
GPU 3: 64.0C 3085RPM | 365.3K/365.2Kh/s | A:895 R:53 HW:0 WU: 434.8/m I:13
GPU 4: 63.0C 2998RPM | 365.2K/363.9Kh/s | A:454 R:34 HW:0 WU: 250.9/m I:13
--------------------------------------------------------------------------------
280.sh file:
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
./vertminer -o -u -p -d 1,2,3,4 -I 13 --worksize 256 --gpu-threads 2 --thread-concurrency 8191 --gpu-engine 1020 --gpu-mem
clock 1600 --gpu-fan 40-80 --temp-overheat 80 --temp-cutoff 85 --lookup-gap 0
So far works great;
Vsm7CxTXBaB386LT6WnarftPKjm5wGYvpS
tips welcome :-p
How? Can't pass 250Kh/s per core with you settings, that's so sad 
P.S. lookup-gap 0 probably means 2
You can check your .bin files names. Can anyone please help me. I'm only getting 240khs per 290s and i have 4 r9 290s. heres my spec.. and i have 4gb of ram running windows 7 64 bit
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Users\Mining Rig 1\Desktop\vertminer-0.5.3\vertminer.exe" -o stratum+tcp://s.ny.vertco.in:3333 -u fafs.1 -p fasfs -I 13 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 8191 --gpu-engine 947 --gpu-memclock 1250 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 75
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Users\Mining Rig 1\Desktop\vertminer-0.5.3\vertminer.exe" -o stratum+tcp://s.ny.vertco.in:3333 -u fafs.1 -p fasfs -I 13 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 8191 --gpu-engine 947 --gpu-memclock 1250 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 75
I have the same problem first trying yesterday. Today just increase System RAM to 8GB and easily jump to 420Kh/s. But I am not sure 4 GPU need 32GB or not LOL
setx GPU_MAX_ALLOC_PERCENT 200
TC increase to 24000 and OC the VCC with 50mV E 1000 M 1500.
i cant go over 8192 without gpus going OFF. ima try to add 4 more gb
I have the following settings on my 2xGigabyte 7950s setup (I got a couple of cards n the shop):
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs
!!!!
Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs
!!!!Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
That's not bad. Remember hashrate is half of normal scrypt. Going to try your settings as mine (posted some 20 updates ago) got me a good 250Khs on HD7950's.
I'm getting 163.5 khs per card! not 327 hashes each ! I used to mine @ ~650 dogecoin so I am currently mining @ 1/4 of the normal scrypt currencies :-/
That explains why I couldn't get it to work properly.
My HD7950 (XFX's) config again, for 250+ Khs each:
./vertminer -o blabla -u aa -p bb --failover-only -I 19,19 -w 256 --thread-concurrency 16384 --gpu-powertune 5,15 --gpu-engine 1110 --gpu-memclock 1500 --gpu-fan 30-90 --auto-fan --auto-gpu --scan-time 30 --temp-cutoff 90 --temp-overheat 85 --temp-target 80 --api-port 4028 --api-listen --api-network --api-allow W:192.168.1/24
Weird! I get a TON of HW with your settings. Guess I'll be sshing from my morning classes to get a clean install going and give it another try
I'm running Xubuntu 13.10 from usb stick and use 4Gb RAM on Asrock Extreme 4 motherboard and sempron 145 cpu. 2x HD7950 (XFX DD and XFX DD Black) and 1x XFX R9 280x.
Also using AMD SDK 2.6 and (I think) 12.8 AMD Drivers. Forgot which version I used though.
I have the following settings on my 2xGigabyte 7950s setup (I got a couple of cards n the shop):
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs!!!!
Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs
!!!!Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
That's not bad. Remember hashrate is half of normal scrypt. Going to try your settings as mine (posted some 20 updates ago) got me a good 250Khs on HD7950's.
I'm getting 163.5 khs per card! not 327 hashes each ! I used to mine @ ~650 dogecoin so I am currently mining @ 1/4 of the normal scrypt currencies :-/
That explains why I couldn't get it to work properly.
My HD7950 (XFX's) config again, for 250+ Khs each:
./vertminer -o blabla -u aa -p bb --failover-only -I 19,19 -w 256 --thread-concurrency 16384 --gpu-powertune 5,15 --gpu-engine 1110 --gpu-memclock 1500 --gpu-fan 30-90 --auto-fan --auto-gpu --scan-time 30 --temp-cutoff 90 --temp-overheat 85 --temp-target 80 --api-port 4028 --api-listen --api-network --api-allow W:192.168.1/24
Weird! I get a TON of HW with your settings. Guess I'll be sshing from my morning classes to get a clean install going and give it another try
I have the following settings on my 2xGigabyte 7950s setup (I got a couple of cards n the shop):
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs!!!!
Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs
!!!!Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
That's not bad. Remember hashrate is half of normal scrypt. Going to try your settings as mine (posted some 20 updates ago) got me a good 250Khs on HD7950's.
I'm getting 163.5 khs per card! not 327 hashes each ! I used to mine @ ~650 dogecoin so I am currently mining @ 1/4 of the normal scrypt currencies :-/
That explains why I couldn't get it to work properly.
My HD7950 (XFX's) config again, for 250+ Khs each:
./vertminer -o blabla -u aa -p bb --failover-only -I 19,19 -w 256 --thread-concurrency 16384 --gpu-powertune 5,15 --gpu-engine 1110 --gpu-memclock 1500 --gpu-fan 30-90 --auto-fan --auto-gpu --scan-time 30 --temp-cutoff 90 --temp-overheat 85 --temp-target 80 --api-port 4028 --api-listen --api-network --api-allow W:192.168.1/24
Weird! I get a TON of HW with your settings. Guess I'll be sshing from my morning classes to get a clean install going and give it another try
Can anyone please help me. I'm only getting 240khs per 290s and i have 4 r9 290s. heres my spec.. and i have 4gb of ram running windows 7 64 bit
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Users\Mining Rig 1\Desktop\vertminer-0.5.3\vertminer.exe" -o stratum+tcp://s.ny.vertco.in:3333 -u fafs.1 -p fasfs -I 13 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 8191 --gpu-engine 947 --gpu-memclock 1250 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 75
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Users\Mining Rig 1\Desktop\vertminer-0.5.3\vertminer.exe" -o stratum+tcp://s.ny.vertco.in:3333 -u fafs.1 -p fasfs -I 13 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 8191 --gpu-engine 947 --gpu-memclock 1250 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 75
I have the same problem first trying yesterday. Today just increase System RAM to 8GB and easily jump to 420Kh/s. But I am not sure 4 GPU need 32GB or not LOL
setx GPU_MAX_ALLOC_PERCENT 200
TC increase to 24000 and OC the VCC with 50mV E 1000 M 1500.
Can anyone please help me. I'm only getting 240khs per 290s and i have 4 r9 290s. heres my spec.. and i have 4gb of ram running windows 7 64 bit
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Users\Mining Rig 1\Desktop\vertminer-0.5.3\vertminer.exe" -o stratum+tcp://s.ny.vertco.in:3333 -u fafs.1 -p fasfs -I 13 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 8191 --gpu-engine 947 --gpu-memclock 1250 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 75
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Users\Mining Rig 1\Desktop\vertminer-0.5.3\vertminer.exe" -o stratum+tcp://s.ny.vertco.in:3333 -u fafs.1 -p fasfs -I 13 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 8191 --gpu-engine 947 --gpu-memclock 1250 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 75
VTC wallet : Vj6Qh3WnzCyuvtSM1oEVb4aiCdEcSX4cbR
R9 290 around 255KH/s. Only Intensity max 13 and TC varies from 8192 to 14320 no difference to hashrate. M:1500E:1000 increases to 270Kh/s
Higher Intensity produces HW errors.
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"expiry" : "30",
"failover-only" : true,
"fix-protocol" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"gpu-threads" : "1",
"gpu-engine" : "947",
"gpu-fan" : "100",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"gpu-vddc" : "1",
"intensity" : "13",
"temp-target" : "85",
"temp-overheat" : "95",
"temp-cutoff" : "100",
"temp-hysteresis" : "3",
"lookup-gap" : "2",
"thread-concurrency" : "14320"
R9 290 around 255KH/s. Only Intensity max 13 and TC varies from 8192 to 14320 no difference to hashrate. M:1500E:1000 increases to 270Kh/s
Higher Intensity produces HW errors.
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"expiry" : "30",
"failover-only" : true,
"fix-protocol" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"gpu-threads" : "1",
"gpu-engine" : "947",
"gpu-fan" : "100",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"gpu-vddc" : "1",
"intensity" : "13",
"temp-target" : "85",
"temp-overheat" : "95",
"temp-cutoff" : "100",
"temp-hysteresis" : "3",
"lookup-gap" : "2",
"thread-concurrency" : "14320"
Today add another 4GB to a total 8GB system RAM from 4GB and Intensity can increase to 20 smoothly and Hash increases to 420kH/s R 290 Flash with 290X BIOS.
Using command line
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -o [mining pool] --gpu-vddc 1 --gpu-fan 100 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 24000 -g 1 -I 20 --worksize 512 --gpu-powertune +20 --lookup-gap 2 -u -p [p]
I have the following settings on my 2xGigabyte 7950s setup (I got a couple of cards n the shop):
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs!!!!
Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
./vertminer -o startum+tcp://stratum.vertco.in:8080 -u -p x -I 13 --thread-concurrency 14777 --gpu-engine 1050 --gpu-memclock 1500
these are the best settings I can get without getting HW errors and all I get is a whopping 327 mhs
!!!!Apparently everyone has r9 280x now, so I have been having a lot of trouble trying to get better settings around here
Would be awesome if more people published their configs for 7950s
Cheers!
That's not bad. Remember hashrate is half of normal scrypt. Going to try your settings as mine (posted some 20 updates ago) got me a good 250Khs on HD7950's.
I'm getting 163.5 khs per card! not 327 hashes each ! I used to mine @ ~650 dogecoin so I am currently mining @ 1/4 of the normal scrypt currencies :-/
That explains why I couldn't get it to work properly.
My HD7950 (XFX's) config again, for 250+ Khs each:
./vertminer -o blabla -u aa -p bb --failover-only -I 19,19 -w 256 --thread-concurrency 16384 --gpu-powertune 5,15 --gpu-engine 1110 --gpu-memclock 1500 --gpu-fan 30-90 --auto-fan --auto-gpu --scan-time 30 --temp-cutoff 90 --temp-overheat 85 --temp-target 80 --api-port 4028 --api-listen --api-network --api-allow W:192.168.1/24
Jump to: