Hi I'm a using HIS 7950,does anyone know why I cant get it running at cooler temperatures, its really hard to get it running under 98 degrees. Im only using it on Intensity 13, getting about 260khs with the following settup, pretty frustrating!! Also using 8gb ram
,
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "10240",
"shaders" : "2048",
"gpu-engine" : "1100",
"gpu-fan" : "35-95",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.081",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "80",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt-vert" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
Topic: The big VTC Vertcoin settings thread - page 37. (Read 264260 times)
YES!!! finally sorted out my CPU only miner.
all came down to sorting out the CLI properly.
Thanks a bunch Aleks. if you have any spare VTC to help kickstart a new miner feel free.. VbsgNouAFM6eGDhkzDhWNA6S4AX1dzB6Xs
For the new miners for CPU only PM if need be, happy to help get this VTC going.
or follow CLI as below:
c:\users\miner\desktop\folders\vert\cgminer -G --scrypt -o stratum+tcp://yourpool.org:3333 -u user.number1 -p password
<---pool type, pool address, port and user login details------>
enjoy and prosper
ua
all came down to sorting out the CLI properly.
Thanks a bunch Aleks. if you have any spare VTC to help kickstart a new miner feel free.. VbsgNouAFM6eGDhkzDhWNA6S4AX1dzB6Xs
For the new miners for CPU only PM if need be, happy to help get this VTC going.
or follow CLI as below:
c:\users\miner\desktop\folders\vert\cgminer -G --scrypt -o stratum+tcp://yourpool.org:3333 -u user.number1 -p password
enjoy and prosper
ua
Hey all,
Just setup 4x Asus DCII 280x.
Having some issues getting anything good out of them.
I am running on BAMT that has been swapped over to run vertminer.
Here is my config, see anything that would cause them to run at only 260Kh/s?
Another odd thing is that the dash board below does not appear to update the clock speed when I change it. Quite odd.
Just setup 4x Asus DCII 280x.
Having some issues getting anything good out of them.
I am running on BAMT that has been swapped over to run vertminer.
Here is my config, see anything that would cause them to run at only 260Kh/s?
Another odd thing is that the dash board below does not appear to update the clock speed when I change it. Quite odd.
Code:
{
"pools" : [
{
"url" : "*",
"user" : "*",
"pass" : "*"
}
]
,
"auto-fan" : true,
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "80",
"gpu-fan" : "0-100",
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"api-port" : "4028",
"expiry" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1070",
"gpu-memclock" : "1800",
"gpu-powertune" : "20",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "9",
"scan-time" : "30",
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
} I have a Sapphire r9 270x but just can't get over 75 kh/s without HW errors.
It's strange I can't set a thread concurrency over 1024. I thought TC was a multiple of the shader count. My gpu has 1280 shaders and I can't even set thread-concurrency=1280 ?
It gives me "Error -61: clCreateBuffer,
I'm on windows with the modifed cgminer 3.7.2
try to use setx GPU_MAX_ALLOC_PERCENT 200 (or even bigger number).
I use vertminer and directly execute the command above.
I don't use vertminer.conf to set the parameters, it makes a lot of troublesome. For example, setx GPU_MAX_ALLOC_PERCENT 100 can not be active if you use vertminer.conf, even if I separately execute setx GPU_MAX_ALLOC_PERCENT 100 before running vertminer.
But for my 280x system and 7850 system, I can use vertminer.conf.
Thanks, but GPU_MAX_ALLOC_PERCENT 200 didn't help.
I finally managed to double the rate by setting
GPU_MAX_ALLOC_PERCENT ""
With that I'm getting 155 kh/s , WU: 144.2/m, no HW and hardly any rejects
conf is:
"scrypt" : true,
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"intensity" : "12",
"gpu-threads" : "1",
"shaders" : "1280",
"thread-concurrency" : "4096",
"lookup-gap" : "2",
"worksize" : "256",
I think there's still more possible, will be trying it without the conf file
R9 280x from Nonny12:
cgminer.exe --scrypt -o POOL-ADDRESS -u username -p password -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20,-20 --gpu-fan 59,50 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --thread-concurrency 8193
cgminer.exe --scrypt -o POOL-ADDRESS -u username -p password -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20,-20 --gpu-fan 59,50 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --thread-concurrency 8193
I get about 700 kh/s with two 280x and this config.
One Powercolor R9 280x
One Sapphire R9 280x Vapor-X
Hi having problems to conf the file can yo send me de inf file please ,sreen shot .thanks jan
Using setup with 2XFX HD7950's (DD and DD Black) and 1 XFX R9 280x. Running on Xubuntu 13.10 with vertminer, using 4Gb RAM.
Settings for HD7950s for 250+ Khs
Settings 280x for 340+Khs
Settings for HD7950s for 250+ Khs
Code:
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export DISPLAY=:0
#
# Cleanup logs
mv hd7950s.log hd7950s.log.bck
#
# Start HD7950s
./vertminer -o stratum+tcp://eu.bitcrush.info:3444 -u aaa -p bbb -o stratum+tcp://eu2.bitcrush.info:3444 -u aaa -p bbb -o stratum+tcp://us.bitcrush.info:3444 -u aaa -p bbb -d 0 -d 1 --remove-disabled --failover-only -I 19,19 -w 256 --thread-concurrency 16384 --gpu-powertune 5,15 --gpu-engine 1110 --gpu-memclock 1500 --gpu-fan 30-90 --auto-fan --auto-gpu --scan-time 30 --temp-cutoff 90 --temp-overheat 85 --temp-target 80 --api-port 4028 --api-listen --api-network --api-allow W:192.168.1/24 2>hd7950s.log
Code:
vertminer version 0.5.3 - Started: [2014-02-05 08:32:09]
--------------------------------------------------------------------------------
(5s):517.1K (avg):504.6Kh/s | A:35600 R:704 HW:2 WU:470.9/m
ST: 2 SS: 19 NB: 53 LW: 611 GF: 0 RF: 0
Connected to eu.bitcrush.info diff 128 with stratum as user xxx
Block: 317ec20d... Diff:81 Started: [09:53:17] Best share: 13.1K
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 78.0C 2842RPM | 256.0K/255.4Kh/s | A:17920 R:576 HW:1 WU:242.7/m I:19
GPU 1: 78.0C 2369RPM | 255.4K/249.7Kh/s | A:17680 R:128 HW:1 WU:228.2/m I:19
--------------------------------------------------------------------------------
Settings 280x for 340+Khs
Code:
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=200
export DISPLAY=:0
#
# Cleanup logs
mv r9.280x.log r9.280x.log.bck
#
#Start 280x
./vertminer -o stratum+tcp://eu.bitcrush.info:3444 -u aaa -p bbb -o stratum+tcp://eu2.bitcrush.info:3444 -u aaa -p bbb -o stratum+tcp://us.bitcrush.info:3444 -u aaa -p bbb -d 2 --remove-disabled --failover-only -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune 5 --gpu-engine 1020 --gpu-memclock 1500 --thread-concurrency 8193 --gpu-fan 30-90 --auto-fan --auto-gpu --scan-time 30 --temp-cutoff 90 --temp-overheat 85 --temp-target 80 --api-port 4029 --api-listen --api-network --api-allow W:192.168.1/24 2>r9.280x.log
Code:
vertminer version 0.5.3 - Started: [2014-02-05 08:32:15]
--------------------------------------------------------------------------------
(5s):361.5K (avg):343.5Kh/s | A:25920 R:384 HW:0 WU:327.8/m
ST: 2 SS: 0 NB: 49 LW: 595 GF: 0 RF: 0
Connected to eu.bitcrush.info diff 32 with stratum as user xxxx
Block: a687a280... Diff:80 Started: [09:47:55] Best share: 234K
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 2: 79.0C 1850RPM | 364.1K/343.8Kh/s | A:25920 R:384 HW:0 WU:327.8/m I:13
--------------------------------------------------------------------------------
Getting around around 290/300 kh/s with 7950 sapphire dualx with boost 3GB No HWs
-I 13 -w 256 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 1.187V VGPU
-I 13 -w 256 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 1.187V VGPU
Hi! What are your overall system specs and OS that you currently use? I have the same card but I cant get to get more than 245Kh/s...
The only thing I've needed to change for Vertcoin is thread concurrency. These seem to be the optimal ones for the cards I've tried so far:
R9 290: 24550
7950: 19712
5850: 5120
R9 290: 24550
7950: 19712
5850: 5120
Thanks for the 5850 TC. 5120 seems to be the only one that works.
just started mining this and I was wondering if half of the speed you get running scrypt is normal? Also it really slows down the pc compared to scrypt.
my 5850 normally does about 320 kh/s and with this coin it does 160 kh/s, is this normal?
Yes VTC mines about 1/2 of straight scrypt so that looks right.
please - give me settings for 7970 Sappfire for cgminer 3.7.2
setx GPU_MAX_ALLOC_PERCENT 200
cgminer --scrypt -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-engine 1022 --gpu-powertune -20 --gpu-memclock 1493 --thread-concurrency 8193 -o stratum+tcp://x -u x -p x
Asus 7970 give me ~344 kh\s
can someone help? even with no tuning parameters i have GPU 0 failure disabling...
please - give me settings for 7970 Sappfire for cgminer 3.7.2
The only thing I've needed to change for Vertcoin is thread concurrency. These seem to be the optimal ones for the cards I've tried so far:
R9 290: 24550
7950: 19712
5850: 5120
R9 290: 24550
7950: 19712
5850: 5120
Thanks for the 5850 TC. 5120 seems to be the only one that works.
just started mining this and I was wondering if half of the speed you get running scrypt is normal? Also it really slows down the pc compared to scrypt.
my 5850 normally does about 320 kh/s and with this coin it does 160 kh/s, is this normal?
I use this:
--scrypt -o stratum+tcp:// --intensity 16 --gpu-engine 800 --gpu-memclock 1125 --worksize 256 --thread-concurrency 5120 --no-submit-stale --failover-only --queue=0 --scan-time=0 --expiry=1 -g 1
Thouse are the best settings for me
R9 280x :
cgminer.exe --scrypt -o stratum+tcp://POOL -u USER.Worker -p PASS -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20,-20 --gpu-fan 59,50 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --thread-concurrency 8193
341kh/s
R9 290 :
cgminer.exe --scrypt -o stratum+tcp://POOL -u User.Worker -p PASS -I 19 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-engine 1000 --gpu-memclock 1500 --gpu-powertune 10 -v 1 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 78
447 kh/s
If i helped someone out if u want to tip : VfUzaU29Ri4oFGhBPLHsmsqMqh97uZ4wbS
R9 280x :
cgminer.exe --scrypt -o stratum+tcp://POOL -u USER.Worker -p PASS -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20,-20 --gpu-fan 59,50 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --thread-concurrency 8193
341kh/s
R9 290 :
cgminer.exe --scrypt -o stratum+tcp://POOL -u User.Worker -p PASS -I 19 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-engine 1000 --gpu-memclock 1500 --gpu-powertune 10 -v 1 --auto-fan --temp-cutoff 85 --temp-overheat 83 --temp-target 78
447 kh/s
If i helped someone out if u want to tip : VfUzaU29Ri4oFGhBPLHsmsqMqh97uZ4wbS
i got a r9 280x and i wrote this settings in my bat and the bat just closes when i click it. and other settings give me error too much memory or something like that what can i do?
I have some WF3 7950s that I'm trying to configure. I am able to get a maximum of 188k, which is disappointing since they do 685k scrypt. I expected over 300k.
I've fiddled with all the settings, can't get better. Any pointers would be great!
My bat file for one of the cards:
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100
cgminer.exe --scrypt -o vtc.poolz.net:3333 -u xxxx -p yyyy -d 0 -I 13 --thread-concurrency 10240 -v 1 -w 256 -g 2 --shaders 2048 --lookup-gap 2 --temp-overheat 85 --temp-cutoff 90 --remove-disabled
Thanks.
Thx a lot! I've fiddled with all the settings, can't get better. Any pointers would be great!
My bat file for one of the cards:
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100
cgminer.exe --scrypt -o vtc.poolz.net:3333 -u xxxx -p yyyy -d 0 -I 13 --thread-concurrency 10240 -v 1 -w 256 -g 2 --shaders 2048 --lookup-gap 2 --temp-overheat 85 --temp-cutoff 90 --remove-disabled
Thanks.
I have some WF3 7950s that I'm trying to configure. I am able to get a maximum of 188k, which is disappointing since they do 685k scrypt. I expected over 300k.
I've fiddled with all the settings, can't get better. Any pointers would be great!
My bat file for one of the cards:
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100
cgminer.exe --scrypt -o vtc.poolz.net:3333 -u xxxx -p yyyy -d 0 -I 13 --thread-concurrency 10240 -v 1 -w 256 -g 2 --shaders 2048 --lookup-gap 2 --temp-overheat 85 --temp-cutoff 90 --remove-disabled
Thanks.
I've fiddled with all the settings, can't get better. Any pointers would be great!
My bat file for one of the cards:
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100
cgminer.exe --scrypt -o vtc.poolz.net:3333 -u xxxx -p yyyy -d 0 -I 13 --thread-concurrency 10240 -v 1 -w 256 -g 2 --shaders 2048 --lookup-gap 2 --temp-overheat 85 --temp-cutoff 90 --remove-disabled
Thanks.
LTC bounty for those who help me get vertminer-gpu working in linux
having a weird issue after building it where when I try to run my .sh file I get:
vert.shL 5L vert.sh: /home/me/Downloads/vertminer-gpu/vertminer: not found
looks like that executable file never gets created in the build process...
EDIT: PM me
having a weird issue after building it where when I try to run my .sh file I get:
vert.shL 5L vert.sh: /home/me/Downloads/vertminer-gpu/vertminer: not found
looks like that executable file never gets created in the build process...
EDIT: PM me
Hi,guys! My settings rig 3x Gigabyte r9 270x and 1x Asus 7850.
del *.bin
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe --scrypt-vert -o stratum+tcp://vtcpool.co.uk:3333 -u Login -p Password --expiry 1 --scan-time 1 --queue 0 --gpu-powertune 20 --lookup-gap 2 --thread-concurrency 4096 -I 12 -g 2 -w 256 --gpu-engine 1115,1115,1115,1040 --gpu-memclock 1500,1500,1500,1350 --auto-fan --gpu-fan 30-85 --temp-target 70 --temp-overheat 85 --temp-cutoff 90
No hardware, no rejects! ))
Screen vertminer http://joxi.ru/fNDxUv3JTJB6eW1XrPA
del *.bin
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe --scrypt-vert -o stratum+tcp://vtcpool.co.uk:3333 -u Login -p Password --expiry 1 --scan-time 1 --queue 0 --gpu-powertune 20 --lookup-gap 2 --thread-concurrency 4096 -I 12 -g 2 -w 256 --gpu-engine 1115,1115,1115,1040 --gpu-memclock 1500,1500,1500,1350 --auto-fan --gpu-fan 30-85 --temp-target 70 --temp-overheat 85 --temp-cutoff 90
No hardware, no rejects! ))
Screen vertminer http://joxi.ru/fNDxUv3JTJB6eW1XrPA
Trying to get vertminer running on BAMT..
Works, using https://github.com/Bufius/vertminer-gpu.. but weird
cgminer (vertminer) doesn't show the fan speeds. but it DOES seem to autocorrect.
At the same time, have to go into gpumon to see temps.
And one of my old 7950s seemed to do something pretty wrong, fan was spinning up to 100% quickly and then stopping, check temp - 96C.
anyone else having issues with temp's not being seen in cgminer/vertminer?
I just took all my scrypt configs but made thread-conncurency +1, so basically for ASUS 280x:
intensity 13
worksize 256
lookup-gap 2
thread-concurrency 8193
shaders 2048
gpu-threads 2
gpu-engine 1080
gpu-memclock 1500
gpu-powertune 0
gets me almost exactly half of my regular scrypt hashrate, ~385 kh/sec per card.
edit : Reboot because i thought maybe that would get it to show temps. Nope, and now hashrate back to 250 kh/sec, EXACT SAME SETTINGS.
edit2 : oh duh, realized i was following a guide too letter-by-letter.. copy ADL files in before running ./buildit.sh, not after, even if they say after.
Works, using https://github.com/Bufius/vertminer-gpu.. but weird
cgminer (vertminer) doesn't show the fan speeds. but it DOES seem to autocorrect.
At the same time, have to go into gpumon to see temps.
And one of my old 7950s seemed to do something pretty wrong, fan was spinning up to 100% quickly and then stopping, check temp - 96C.
anyone else having issues with temp's not being seen in cgminer/vertminer?
I just took all my scrypt configs but made thread-conncurency +1, so basically for ASUS 280x:
intensity 13
worksize 256
lookup-gap 2
thread-concurrency 8193
shaders 2048
gpu-threads 2
gpu-engine 1080
gpu-memclock 1500
gpu-powertune 0
gets me almost exactly half of my regular scrypt hashrate, ~385 kh/sec per card.
edit : Reboot because i thought maybe that would get it to show temps. Nope, and now hashrate back to 250 kh/sec, EXACT SAME SETTINGS.
edit2 : oh duh, realized i was following a guide too letter-by-letter.. copy ADL files in before running ./buildit.sh, not after, even if they say after.
is no one else w/ dual gpus noticing an issue with cgminer or vertminer like i am? I switched back to cgminer and I have the same issue. enabled -g 2 and gpu 0 runs about 50-70khs faster than gpu 1. I even tried physically swapping cards but it does the same thing. even tried running 2 separate instances of cg and vertminer w/ -d 0 and -d 1 switches but gpu 1 still runs slower. when mining doge i had both running at 725-750 at the same time.
cgminer --scrypt -v 1 -I 19,13 -g 2 -Q 9 -s 60 -E 120 -w 256,256 --lookup-gap 2,2 --shaders 1536,2048 --thread-concurrency 8000,8192
the above is what i've been using for all other scrypt mining. it generally gets me 1,200kh/s
gpu 0 is an HD 6970 @ 930/1500 (500kh/s)
gpu 1 is an HD 7970 @ 1000/1500 (700kh/s)
i would like to mine vertcoin.
wat do?
the above is what i've been using for all other scrypt mining. it generally gets me 1,200kh/s
gpu 0 is an HD 6970 @ 930/1500 (500kh/s)
gpu 1 is an HD 7970 @ 1000/1500 (700kh/s)
i would like to mine vertcoin.
wat do?
Jump to: