Topic: [Ultracoin] [Est. Feb 2014] ~ ASIC Resistant & Ultrafast 6 Second Transactions! - page 141. (Read 381060 times)
May 12, 2015, 03:09:12 AM
ok i get it nobody cares to help us mine this coin .....
May 11, 2015, 06:54:11 PM
What is up with the amount of orphans on tumbling block 
?
?Would like to know that as well.
Still not answered!
May 11, 2015, 05:56:20 PM
on the advice set yakminer. I use here are the settings for the 280X
{
"pools" : [
{
"url" : "stratum+tcp://pool",
"nfmin" : "4",
"nfmax" : "30",
"starttime" : "1375817223",
"user" : "user",
"pass" : "pass"
}
]
,
"device" : "0,1,2,3,4",
"rawintensity" : "1280",
"worksize" : "128",
"kernel" : "scrypt-chacha",
"lookup-gap" : "8",
"buffer-size" : "2590",
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"gpu-powertune" : "15",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "70",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"scrypt-chacha" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
speed - 285 h\s
but one card does not work, and constantly driver error, or the card falls or Sikc and Dead
that's not right I can not understand ...
{
"pools" : [
{
"url" : "stratum+tcp://pool",
"nfmin" : "4",
"nfmax" : "30",
"starttime" : "1375817223",
"user" : "user",
"pass" : "pass"
}
]
,
"device" : "0,1,2,3,4",
"rawintensity" : "1280",
"worksize" : "128",
"kernel" : "scrypt-chacha",
"lookup-gap" : "8",
"buffer-size" : "2590",
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"gpu-powertune" : "15",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "70",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"scrypt-chacha" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
speed - 285 h\s
but one card does not work, and constantly driver error, or the card falls or Sikc and Dead
that's not right I can not understand ...
May 11, 2015, 12:49:28 PM
Use yacminer, it's better with higher n factors, not ultracoinminer.
May 11, 2015, 11:42:30 AM
sages!
I ask your help.
ultracoinminer --scrypt-jane --gpu-memclock 1350 --gpu-engine 1070 --worksize 128 -g 1 --lookup-gap 2 --thread-concurrency 24400 -I 9 -o Pool -u user -p password --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -d 1
card 280X only get HW (
if I write --thread-concurrency 165760 I get an error -4 or an error -61
16GB RAM
please help, what am I doing wrong?
I ask your help.
ultracoinminer --scrypt-jane --gpu-memclock 1350 --gpu-engine 1070 --worksize 128 -g 1 --lookup-gap 2 --thread-concurrency 24400 -I 9 -o Pool -u user -p password --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -d 1
card 280X only get HW (
if I write --thread-concurrency 165760 I get an error -4 or an error -61
16GB RAM
please help, what am I doing wrong?
May 11, 2015, 10:17:27 AM
In doubt you could always PM thirty, he is active and a nice guy 
LIES!Not nice or not active?
@mitache cgwatcher can go nuts with command attributes, I find it best to extract config straight from the miner, then use it in cgwatcher
(You can do that by going to [S ]ettings -> [W]rite config file)
can you help with this config file fox 280x?
May 11, 2015, 09:25:27 AM
i'm trying to mine this since yesterday all i'm getting is video driver crashes ....
Try 13.12 driver, although I was able to mine with 14.12 (Omega) as well. We're talking about AMD GPUs?yes 6900's 7900's and r9 290's
tried 13.12 still driver crashes or no accepted shares
May 11, 2015, 08:51:37 AM
i'm trying to mine this since yesterday all i'm getting is video driver crashes ....
Try 13.12 driver, although I was able to mine with 14.12 (Omega) as well. We're talking about AMD GPUs? May 11, 2015, 05:57:36 AM
i'm trying to mine this since yesterday all i'm getting is video driver crashes ....
May 11, 2015, 12:58:22 AM
utcminer has low hashrate I think?!
May 10, 2015, 02:57:47 PM
what driver version to use for amd cards ?
May 10, 2015, 12:44:13 PM
guys trying to mine UTC in my 7900's rig with 2 gpus and 4 gigs of ram and getting no accepted shares ....
also what are the ideal settings for 7900's , 6900's and r9 290 series gpus ?
i use utcminer, please help a fellow miner, ty
also what are the ideal settings for 7900's , 6900's and r9 290 series gpus ?
i use utcminer, please help a fellow miner, ty
May 09, 2015, 12:21:28 PM
ultrablockparty looks better! 
May 09, 2015, 09:56:45 AM
What is up with the amount of orphans on tumbling block ?
?Would like to know that as well.
May 08, 2015, 08:51:02 PM
What is up with the amount of orphans on tumbling block ?
?
May 05, 2015, 10:42:56 PM
I've been watching crypto currencies for awhile now. Me and a friend are looking into building a machine to run 4 Saphire Tri-x R9 290x cards. I dont have a problem building the machine but everyone seems to have a different opinion about what the scrypt rate on the cards are (or any card for that.) My research says I should be able to get around 1MH/s per card but I've been seeing in some places where people are saying theyre only getting like 9.7KH/s. Could someone help clear up the card hashrates and/or direct me in the right direction if I am currently going the wrong way?
Thank you!
~TruFord
Thank you!
~TruFord
I will suggest you to do some more research. There are lots of algorithms used by various cryptocurrencies. Different algorithms can be mined "profitably" on CPU, GPU, and ASICs. For example
SHA-256D & scrypt are only profitable on ASICs or via Cloud Mining in long term.
X11,X13 etc are profitable on both AMD & nvidia GPUs if u mine the right coin
quark,qubit, scrypt-chacha/jane are right now more profitable on nvidia gpus
I dont have AMD GPUs so i dont know what they r good at.
I hope this helps.
And the 9.7KH/s might be for a scrypt-chacha/jane coin like ultracoin. This algo requires more memory for each hash so hashrates go down as GPU have limited memory/VRAM.
Regards
Sam
May 05, 2015, 10:14:04 PM
I've been watching crypto currencies for awhile now. Me and a friend are looking into building a machine to run 4 Saphire Tri-x R9 290x cards. I dont have a problem building the machine but everyone seems to have a different opinion about what the scrypt rate on the cards are (or any card for that.) My research says I should be able to get around 1MH/s per card but I've been seeing in some places where people are saying theyre only getting like 9.7KH/s. Could someone help clear up the card hashrates and/or direct me in the right direction if I am currently going the wrong way?
Thank you!
~TruFord
Thank you!
~TruFord
May 05, 2015, 03:12:10 PM
What mining software are you using?
No matter how I try to mine this. All I get is either nothing or HW errors.
This are my settings:
280X,280X,270,280X,280X
"rawintensity" : "1280,1280,960,1280,1280",
"vectors": "1,1,1,1,1",
"worksize" : "128,128,128,128,128",
"lookup-gap" : "8,8,8,8,8",
"gpu-threads" : "1,1,1,1,1",
"thread-concurrency" : "168192,172032,112640,172032,172032",
"gpu-engine" : "1035-1035,1035-1035,1030-1030,1020-1020,1035-1035",
"gpu-fan" : "30-87,30-87,0-87,30-87,30-87",
"gpu-memclock" : "1500,1500,1400,1500,1500",
"gpu-powertune" : "20,20,20,20,20",
This are my settings:
280X,280X,270,280X,280X
"rawintensity" : "1280,1280,960,1280,1280",
"vectors": "1,1,1,1,1",
"worksize" : "128,128,128,128,128",
"lookup-gap" : "8,8,8,8,8",
"gpu-threads" : "1,1,1,1,1",
"thread-concurrency" : "168192,172032,112640,172032,172032",
"gpu-engine" : "1035-1035,1035-1035,1030-1030,1020-1020,1035-1035",
"gpu-fan" : "30-87,30-87,0-87,30-87,30-87",
"gpu-memclock" : "1500,1500,1400,1500,1500",
"gpu-powertune" : "20,20,20,20,20",
May 04, 2015, 05:24:07 PM
No matter how I try to mine this. All I get is either nothing or HW errors.
This are my settings:
280X,280X,270,280X,280X
"rawintensity" : "1280,1280,960,1280,1280",
"vectors": "1,1,1,1,1",
"worksize" : "128,128,128,128,128",
"lookup-gap" : "8,8,8,8,8",
"gpu-threads" : "1,1,1,1,1",
"thread-concurrency" : "168192,172032,112640,172032,172032",
"gpu-engine" : "1035-1035,1035-1035,1030-1030,1020-1020,1035-1035",
"gpu-fan" : "30-87,30-87,0-87,30-87,30-87",
"gpu-memclock" : "1500,1500,1400,1500,1500",
"gpu-powertune" : "20,20,20,20,20",
This are my settings:
280X,280X,270,280X,280X
"rawintensity" : "1280,1280,960,1280,1280",
"vectors": "1,1,1,1,1",
"worksize" : "128,128,128,128,128",
"lookup-gap" : "8,8,8,8,8",
"gpu-threads" : "1,1,1,1,1",
"thread-concurrency" : "168192,172032,112640,172032,172032",
"gpu-engine" : "1035-1035,1035-1035,1030-1030,1020-1020,1035-1035",
"gpu-fan" : "30-87,30-87,0-87,30-87,30-87",
"gpu-memclock" : "1500,1500,1400,1500,1500",
"gpu-powertune" : "20,20,20,20,20",
May 04, 2015, 04:45:06 PM
Just wanted to share this. I am using following config for NF16 for gtx 970 using cudaminer
cudaminer.exe -d gtx970 -q --algo=scrypt-jane:16 -L 8 -i 1 -l t32x4 -C 1 -b 65536
This is giving me 780h/sec & my APC UPS s/w reports ~154W of power usage.
Please share if you have a better config for gtx 970
Regards
Sam
cudaminer.exe -d gtx970 -q --algo=scrypt-jane:16 -L 8 -i 1 -l t32x4 -C 1 -b 65536
This is giving me 780h/sec & my APC UPS s/w reports ~154W of power usage.
Please share if you have a better config for gtx 970
Regards
Sam
Thanks. Assume ~100watts for the 970 giving 7.8h/s/w. Not appetizing enough to consider buying for the purpose of mining but OK if you already have for a gaming PC.
replaced some 280x toxic for gtx970 from warranty for 50bucks more each
) Jump to: