Topic: Unofficial BITMINE CoinCraft series 28nm ASIC miners thread - page 9. (Read 202957 times)

Hi,

What's the status of turbo mode for the desks? Maybe anyone has already a machine and tried it?

- is turbo mode available?
- is turbo mode permanent possible?
- for 1TH/s normal mode, whats the actual hash power increase in turbo mode?

I don't get the whole turbo mode problem at all. Anyone can enlight me?

+1 with that just got the confirmation today by support.
Original delivery last week of february - > estimate delivery by bitmine last week of april 

Actually the COUGAR VORTEX HDB 120 is 60.4 cfm, the HDB 140 is 70.5 cfm

I'll put a few in the CoinCraft Desk, if it ever arrives, to see how much of a difference it makes

But judging from how vulnerable the old Avalons are to hardware errors are, I think less airflow will not work later in the summer. It's already 18 degrees C here today and two years ago we had snow. Damn that global warming....

Original ones are Industrial fans with max cfm 150-200... these are _only_ 70cfm so they move roughly 60% of the air. But very silent.
It's possible to cool these units with lesser fans IF you run them in not too hot enviroment. You fry the chips, your own fault... any small enough room will heat up with 1kw heater.

I've pasted this link all over the forums They also work for antminers..




http://www.newegg.com/Product/Product.aspx?Item=N82E16835553002

So the original question was: can you keep it in the room where you sleep? Answer: No. Thank you confirming ;-)

Having it in the room next door is not an issue, I have 4 Avalons with the original fans @ 100%, you can't hear them through the walls and door (but the door has a special rubber sound stopper on the bottom).

what fans did you replace them with? info
and
link to the product please

thanks

here we go guys, next part of bitmines history of shame!

https://bitcointalksearch.org/topic/m.5662415

we saw this yesterday and now there are some more INFOS



If you look on Bitmine's first three boards, you will see how they link the chips.

But you look on our first board that was made in 2013/12/20 (sample chips came out at 2013/12/28), we used ST MCU solution. Mainly STM105 chip.

So for this solution, you need to write own firmware.

After Bitmine failed to get their boards working, around Feb., Innosilicion passed our solution to them to help them out.

And if you see today's any system with A1 chips, that using one MCU solution and using comm board with 6 connectors, basically are our copycats.



what you got for the help???



Since Innosilicon needs to get their chips sale up, so they use preferential treatment and good chip price as the compensation for this.



now we know what happens with our cash and why!!!
http://kryptonews.blogspot.ch/2014/03/falls-die-beschuldigungen-stimmen-dann.html

thx

point and case....

i sleep whit ear plugs any way so a little sound whoulden hurt... but a jet engine? would be a problem.. especially if it can be heard trough a door.... i live whit other pepoel also and not in the country... so if i actually would use it i would have to rebuild it as was my point in the first place...

but its just 1 point in a long list of wrongs bitmine.ch are doing... (whit 3 mounts delay i would expect something like that already fix in the waiting time...but no they had other things to do i guess)

This is silent. Very silent. Video has sound. Using same Chips as these bitmain miners. Running stable +1 week

http://eligius.st/~wizkid057/newstats/userstats.php/1JHfJwJMuuubaEzBuCbc7LonqepD95C899

https://www.dropbox.com/s/7qlfnm5d4tofn5s/2014-03-04%2009.48.33.mp4

Its modified to be silent

I replaced just those 3 industrial fans. Evey user is responsible for modifications, voids warranty and so on. It runs cool enough in 21c room temp, but silent.




Would you sleep next to it... maybe not. But having it in next room and you cant hear it. You have to take consideration these unita heat any room...

my 61 day deadline has past so i fille for refund (not by their form, avoid that, its a new contract and dont accept that)

so not gona happen, im happy if i get out of this whit just a small lose at this point........

(i still se heat as heat and cant see the problem in quiet fan tec,,,, if 1000 watts is the problem... make 2 on 500 = same output, no noise... (edit: pepoel bin doing this on big gaming machines, using 2 psu (like 2 on 800w... output 1600w) as 1 is not enorf to run multiply cards))

but stil hear it behind a closed door..... no way m8.... dont know ho build your machine but if it makes that much noise its just bad build for sure...

but actually it don't matter any more...

bitmine.ch is officially a scam by now.....

so i dont even have to defend it.....

read both hole treads...

OK so you must be onto something that all those other ASIC producers have missed... Do you even currently own and run ASIC equipment?

ASICs are not GPUs. They are run at different limits, you can't software downvolt them and play with the power consumption. To make them profitable, you run them at the upper limit and that means cooling them like crazy. Run for example the avalon chips at 80 degrees and see HW errors go through the roof.

Even the little toy USB sticks like the block errupters... people get a bunch of them on a USB hub and guess what, they need to add fans to make it work.

I see you have a CCD on order, why don't you wait another 2 months to take delivery of it and then post us a little video of how you tweaked your setup to run without making any noise by just doing air cooling.

You will be doing all of us a big favour

lol then its easy just give me 2 on half the power then in sted of 1 nosy one---- problem solved...

yes it has fans...

ever hearth of 'quiet fan tec... ? (it like year 2000 tec, 14 years old)...

it runs nice and quiet at approx 60-70 in gpu temp. (acceptable temp range ) and can barely hear it running... i cut make it even quieter if i accepted a temp range on 85-95 witch its build for (running on lower as i do extends the hardware life span, or in plain talk, don't destrue your hardware so much/fast (all use off hardware have have a life span all based on how its build and how you use it) )

and just a ? but why should i lie about this? what would be the point?

the fact is still that i need to go get new fans for it and rebuild it my self if it makes that much noise as reported.... its just crazy and i relay don't get it sorry and i have build many machines over the years... my first computer/machine was a texas q9 (before commadore 64 if any on still knows what that was (way before the first pc))

so i should know what im talking about and i se no reason for a fan to make so much noise as reported in year 2014... not even a server tower/rig makes that much noise... so so sorry i relay don't get it...

but maby im wrong an you can educate me? but it don't sound like it....

Hey boys and girls I have good news for you: just got my refund 

No statement, no calculation, no explanation, no nothing, and... according to my calculations even with the -30 usd "administration cost" the amount received is still short 89$, but at least some more money in my account than I originally sent them. I will ask them to give me a proper refund statement with their calculations, but for the time being I'm pretty happy. Would have had to mine quite a lot of BTC to get the equivalent at current prices. Good Luck to everyone else!

thats sounds much better

Yifosh Massakarpeles

ymmd

780 Watts is not a 1000 Watts

All air cooled ASIC miners I've seen are noisy. Even the water cooled BabyJets I have hear make more noise than is comfortable to sleep next, and they are only 500 Watts. The main reason is they are all overclocked to the max to get more performance. I don't know anybody that runs their ASIC at half speed (or that can afford to run it at half speed)

How do you air cool 780 Watts "whit no sound all the time", really.... Does it have a fan? Does it move air? Then you have noise

my normal gaming machine running on 800W, script minning at 500 mhz (gpu clock speed at 1150 and mem at 1200) (high for single card in script mining) whit no sound all the time (its around 780W it relay pulls from the wall... but still....) so "bullshit" on that...

haha girgio zerlan