Eliovp,
what gpu card do you use there?
reference or non ref?
Topic: [UPDATE] RX480 (Ref) 31+Mh, Custom Rom - VDDC OFFSET + Custom timing - page 41. (Read 231013 times)
September 06, 2016, 02:01:06 PM
September 06, 2016, 01:54:53 PM
Here you go 
Still running, took the screenshot pretty quickly because i was kind of happy haha..
Let's see if i can break 34+ Mh :p
Still running, took the screenshot pretty quickly because i was kind of happy haha..
Let's see if i can break 34+ Mh :p
you need to also put your PC environment, CPU, mobo, etc
see if it throttles down like the previous lowenergy rom.... i am suspecting temps to be the culprit...
you got to list down a checklist for the device signing thing because many members have some issues and cannot use the rom.
I measured ATW, 0.58A, so 130watt.
Did you see the temp? not going over 60 degrees mate
It's stable as a rock
September 06, 2016, 01:53:21 PM
Here you go
Still running, took the screenshot pretty quickly because i was kind of happy haha..
Let's see if i can break 34+ Mh :p
Still running, took the screenshot pretty quickly because i was kind of happy haha..
Let's see if i can break 34+ Mh :p
you need to also put your PC environment, CPU, mobo, etc
see if it throttles down like the previous lowenergy rom.... i am suspecting temps to be the culprit...
you got to list down a checklist for the device signing thing because many members have some issues and cannot use the rom.
September 06, 2016, 01:53:00 PM
Let's see if i can break 34+ Mh :p
fingers crossed
September 06, 2016, 01:43:15 PM
Here you go
Still running, took the screenshot pretty quickly because i was kind of happy haha..
Let's see if i can break 34+ Mh :p
Still running, took the screenshot pretty quickly because i was kind of happy haha..
Let's see if i can break 34+ Mh :p
September 06, 2016, 01:41:25 PM
Got 33Mh at 80watt lol..
Pictures following
Pictures following
holy molly!
September 06, 2016, 01:40:13 PM
When I run the custom roms after flashing my cards, I get Code 43 and Code 10s on the GPU 1 slot. The GPU 0 slot says that it is working properly.
Running driver 16.8.3 on win 7 pro.
Even after signing the file and putting into my windows driver folder, AMD still says there are no graphics card installed.
Once I flash everything back to stock bios, and replace the file in my windows folder it works like a charm.
Running driver 16.8.3 on win 7 pro.
Even after signing the file and putting into my windows driver folder, AMD still says there are no graphics card installed.
Once I flash everything back to stock bios, and replace the file in my windows folder it works like a charm.
September 06, 2016, 01:39:55 PM
Got 33Mh at 80watt lol..
Pictures following
Pictures following
September 06, 2016, 01:14:06 PM
Eliovp.
You going to put out a new Win 7 guide on how to do ROMS? I have tried 5 or 6 times now and each time it f*cks up.
It may be my GPUs or Mobo tho. I kept having issues with gpu 1, and last night I switched gpu 1 and gpu 0 around for their PCI slots and now when I turn off AMD Crossfire I get a blank screen.
You going to put out a new Win 7 guide on how to do ROMS? I have tried 5 or 6 times now and each time it f*cks up.
It may be my GPUs or Mobo tho. I kept having issues with gpu 1, and last night I switched gpu 1 and gpu 0 around for their PCI slots and now when I turn off AMD Crossfire I get a blank screen.
How to flash roms? Or how to mod roms?
Sounds like a driver issue to me..
I assume this doesn't occur when running on a stock rom?
September 06, 2016, 01:12:04 PM
Eliovp.
You going to put out a new Win 7 guide on how to do ROMS? I have tried 5 or 6 times now and each time it f*cks up.
It may be my GPUs or Mobo tho. I kept having issues with gpu 1, and last night I switched gpu 1 and gpu 0 around for their PCI slots and now when I turn off AMD Crossfire I get a blank screen.
You going to put out a new Win 7 guide on how to do ROMS? I have tried 5 or 6 times now and each time it f*cks up.
It may be my GPUs or Mobo tho. I kept having issues with gpu 1, and last night I switched gpu 1 and gpu 0 around for their PCI slots and now when I turn off AMD Crossfire I get a blank screen.
September 06, 2016, 01:10:04 PM
Been playing around for 15minutes now..
Give me half an hour and i'll have a better result
Give me half an hour and i'll have a better result
September 06, 2016, 01:08:28 PM
Finally found some time to play around some more.
At this moment i'm around 31Mh while the gpu alone is consuming around 85watt (gpu-z), also measured ATW and got 0.59A, so here that's around 130watt.
Picture
Larger image: Here
Greetings
At this moment i'm around 31Mh while the gpu alone is consuming around 85watt (gpu-z), also measured ATW and got 0.59A, so here that's around 130watt.
Picture
Larger image: Here
Greetings
September 06, 2016, 12:36:59 PM
i got 27.3 mhs avg with Eliovp rom for linux.
i realize that the speed is going up and down from 25 to 28mhz.
mostly on 28.
maybe thats why the avg speed is around 27mhs.
anyone got the same result?
is 30mhs is achiveable?
tks,
i realize that the speed is going up and down from 25 to 28mhz.
mostly on 28.
maybe thats why the avg speed is around 27mhs.
anyone got the same result?
is 30mhs is achiveable?
tks,
September 06, 2016, 11:45:10 AM
27mhash 80 watt 
which original BIOS is that?
Can share?
which original BIOS is that?
Can share?
https://i.imgur.com/4iq5uQl.jpg here you go! (how can i show it as a picture?)
Oh Scheizen! So that is just you tweaking the wattman settings and not running a custom ROM?
September 06, 2016, 10:17:09 AM
27mhash 80 watt
which original BIOS is that?
Can share?
which original BIOS is that?
Can share?
https://i.imgur.com/4iq5uQl.jpg here you go! (how can i show it as a picture?)
September 06, 2016, 08:00:00 AM
I finally used my daily Win10 box to flash my MSI RX 480's (8GB) with the 480LowEnergyOK.rom file. Flashed and put back into my Ubunut 16.04 mining rig. Getting steady 28.5MH/s (171MH/s rig) and the entire rig + box fan is 995w at the wall. 4-5MH/s slower than my R9 390 (8GB) rigs but 1/2 the power. Sapphire Nitro+ RX 480's on the way, but 4GB type this time.
Super happy.
Super happy.Nice rigs. Congratulation for the successful mod. The watt consumption is quite impressive.
I wish I had dabbled some time on Linux - this approach above is much cleaner - any tutorials on Claymore Dual Miner on Linux anyone?
September 06, 2016, 07:58:40 AM
dude, i CANT see my temp... lets focus on that part. 
bro i got your Issue on my Sapphire raise your fan speed to 90 % at the claymore config add -tt -90 like that
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x5404a56d1b6bd124196a2c17028eeaaf3c9be0ba/worker1/ -epsw x -tt -90
and tell me the difference
My fan's dont respond to the -tt -90 code. No idea what is going on. As long as my room is cooled, the xfx's will run 29 mhash. But when it gets hot they will (throttle?) run 25-27mhash.
I also have the issue with my sapphire's. I tried to mod the rom, went wrong, flashed the original bios rom back, cards are running smoothly 27mhash 80 watt but i cant see temp or clock's. HOW?
27mhash 80 watt
which original BIOS is that?
Can share?
September 06, 2016, 05:35:15 AM
dude, i CANT see my temp... lets focus on that part.
bro i got your Issue on my Sapphire raise your fan speed to 90 % at the claymore config add -tt -90 like that
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x5404a56d1b6bd124196a2c17028eeaaf3c9be0ba/worker1/ -epsw x -tt -90
and tell me the difference
My fan's dont respond to the -tt -90 code. No idea what is going on. As long as my room is cooled, the xfx's will run 29 mhash. But when it gets hot they will (throttle?) run 25-27mhash.
I also have the issue with my sapphire's. I tried to mod the rom, went wrong, flashed the original bios rom back, cards are running smoothly 27mhash 80 watt but i cant see temp or clock's. HOW?
September 06, 2016, 05:27:36 AM
dude, i CANT see my temp... lets focus on that part.
bro i got your Issue on my Sapphire raise your fan speed to 90 % at the claymore config add -tt -90 like that
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x5404a56d1b6bd124196a2c17028eeaaf3c9be0ba/worker1/ -epsw x -tt -90
and tell me the difference
September 06, 2016, 04:07:39 AM
dude, i CANT see my temp... lets focus on that part.
Jump to: