Author

Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 126. (Read 624197 times)

member
Activity: 80
Merit: 10
Anyone know if there is electrical insulation (thermal interface material) between the heat sink and the board?


legendary
Activity: 2674
Merit: 1083
Legendary Escrow Service - Tip Jar in Profile
I don`t care about 'datacentres'.

I thought because its 19"... but if you build your own rack its not a problem of course.
full member
Activity: 178
Merit: 101
I don`t care about 'datacentres'.
legendary
Activity: 2674
Merit: 1083
Legendary Escrow Service - Tip Jar in Profile
Im not sure datacentres will be happy when you announce 19" racks that are watercooled. I guess they will fear a leak and damage to the hardware of their colocation racks. But i might be wrong.
hero member
Activity: 617
Merit: 543
http://idontALT.com
I'll get my BitBurner waterblock prototype next week Smiley

And Burnin too Wink

How bout you create a new thread for that eh? Wink

Stay on topic,
QG
full member
Activity: 224
Merit: 100
I'll get my BitBurner waterblock prototype next week Smiley

And Burnin too Wink

Could you then provide some quotes for full specs?

That is, waterblocks, pump, radiator?
full member
Activity: 178
Merit: 101
I'll get my BitBurner waterblock prototype next week Smiley

And Burnin too Wink
full member
Activity: 224
Merit: 100
Given that you are paying 100 eur per board another 10/20 per board does not seem that much Smiley

Especially if you consider that you might get another discuont for the BARE Pcb that you need anyway if you want to overclock...
full member
Activity: 154
Merit: 100
Given that you are paying 100 eur per board another 10/20 per board does not seem that much Smiley
legendary
Activity: 1106
Merit: 1001
Too expensive :/

1 waterblock would cost 20-40$

http://www.liquidextasy.de/dienstleistungen/spezialanfertigungen

these guys could provide some good solutions
full member
Activity: 154
Merit: 100
Mining hardware assembler and administrator.
I like this concept, I'm just waiting for the source release so I can start making numbers for my project..  Grin
member
Activity: 70
Merit: 10


1 waterblock will be cooling 2 bitburner

 Cheesy Grin
That's the same thing I was doing but with the klondikes . I made each water block two piece and symmetrical. They are CNC routed the block can be screwed or tig welded together. I sent it out for a quote yesterday. I based the internal design off some GPU water blocks I had laying around.
full member
Activity: 178
Merit: 101
I guess there must be multiple cooling circuits to get the heat from the boards, right?

The internal construction of the water blocks is in development, but i think there will be multiple cooling circuits.

Here`s also a quick case construction (still a little bit out of square^^):

member
Activity: 77
Merit: 10


1 waterblock will be cooling 2 bitburner

 Cheesy Grin

great idea to minimize cooling block material cost, maybe you can make the blocks longer to put 2 or 3 burnin boards to each others block side.
I really don't know much about these 19" racks and how deep they can be.

I guess there must be multiple cooling circuits to get the heat from the boards, right?
legendary
Activity: 1974
Merit: 1077
^ Will code for Bitcoins
Are you a real hacker burnin? Will you offer mining board service with Bitfury's chips? If yes how are you going to get the schematics of the boards?

Will you please stop to spam this topic with Bitfury bullshit? It says in the title: "Burnins Avalon Chip to mining board service". If you want to discuss something else please start a new thread.
legendary
Activity: 1904
Merit: 1007
Hey burnin,

Bitfury chips are now for sale^^, so lets start to think about REV.02 of Bitburner.

see here:
http://www.bitfurystrikesback.com/shop/
https://bitcointalksearch.org/topic/m.2661326

regards

I don't think punin will give the master board schematics after reading from here: http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-h-board/  "16 chip Hashing Board to be used with the Master board (or separately if you’re a real hacker)"

Are you a real hacker burnin? Will you offer mining board service with Bitfury's chips? If yes how are you going to get the schematics of the boards?
sr. member
Activity: 322
Merit: 250
Burnin - ETA on website + ordering?
full member
Activity: 178
Merit: 101


1 waterblock will be cooling 2 bitburner

 Cheesy Grin
member
Activity: 109
Merit: 10
Hey burnin,

Bitfury chips are now for sale^^, so lets start to think about REV.02 of Bitburner.

see here:
http://www.bitfurystrikesback.com/shop/
https://bitcointalksearch.org/topic/m.2661326

regards
My God, difficulty will skyrocket soon...
hero member
Activity: 882
Merit: 547
BTC Mining Hardware, Trading and more
Hey burnin,

Bitfury chips are now for sale^^, so lets start to think about REV.02 of Bitburner.

see here:
http://www.bitfurystrikesback.com/shop/
https://bitcointalksearch.org/topic/m.2661326

regards
Jump to: